The one obvious omission here is gl_HelperInvocation itself. However,
the spec doesn't require that we generate then when gl_HelperInvocation
is used, it merely mandates that we report them if they are there.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Otherwise, as we add things to the switch, we're going to forget and add
some 64-bit op at some point in the future and it'll stop getting
flagged. There's no reason why we can't do the check for derivatives.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Make sure that a <group> tag within another <group> tag work just fine.
v2: rename 'halfbyte' to 'byte' to match the size (Lionel).
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Now we can decode a <group> tag inside another <group> tag, and properly
print its indices and content.
v2: Use push/pop stack to fields, groups and iters (Lionel).
v3: Add assert(iter->level < DECODE_MAX_ARRAY_DEPTH) (Lionel).
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
We currently use the group->next pointer to iterate through the <group>
tags. This change them to be a type of field, so we can descend into
them while iterating, and then go back to the original position. Will be
useful when we want to decode <group>'s inside <group>'s, and when there
are more <field>'s after a <group> tag.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
A gen_group (group in most of the code) can be of several types:
- instruction
- struct
- register
- group (?!?)
The <group> tag actually represents an array of elements. So at least
in our code, lets call it an array to avoid confusion with gen_group.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Refactor the code from gen_spec_load_from_path() into a separate
function, that can be used with a xml file that doesn't fit the genX.xml
filename format.
Will be used soon for implementing unit tests for gen_decoder.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
When using gen_spec_load_from path, only abort decoding if the read
length is 0. Previously, we were aborting if finding an EOF, even if
something was read from the file.
Also only kill the decoded file if no commands or structs were found,
and print a message in such case.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This allows using the LCDIF display controllers (with the mxsfb drm
modesetting driver) along with the Etnaviv render-only drivers. LCDIF is
found on i.MX SoCs.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This should save a lot of per-compile time by using the RA the way it's
actually supposed to be used.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This doesn't fix any bug at the moment because the next statement is
'true' which happens to be APIMODE_D3D, but if that changes it could.
The fixes tags is as far I could go but the error predates it (2016 is
probably far enough).
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 8db6f2e6eb ("anv/pipeline: Roll genX_pipeline_util.h into genX_pipeline.c")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
warning: use of logical '||' with constant operand
note: use '|' for a bitwise operation
Fixes: 758fdce9fe ("nir: Add some generic helpers for writing lowering passes")
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
While testing kmscube with mesa master, it turns out that kmscube is not
working anymore. After bisecting, commit
5a7688fdec is the culprit. A short trial
and error session allowed to find the removed bit of code making kmscube
working again.
This patch adds it back.
Fixes: 5a7688fde ("panfrost: Use 64-bit descriptors globally")
v2: Add comment pointing out this is magic. [Alyssa, trivial]
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Rather than anything "early Midgard", limit us specifically to T6XX, as
certain workarounds only apply to genuine T6XX, not T7XX.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Fixes: 14531d676b ("nir: make nir_const_value scalar")
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
This can be the case if the resource was obtained from
st_vdpau_output/video_surface_gallium.
st_vdpau_output/video_surface_dma_buf do a similar dance internally.
v2:
* Pass PIPE_HANDLE_USAGE_FRAMEBUFFER_WRITE instead of 0 for usage.
Bugzilla: https://bugs.freedesktop.org/111099
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> # v1
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Needed for the following st/mesa fix.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We still have some big ticket items left on GLES 3.0, but it's often
helpful to be able to access higher dEQP levels for debugging features
that just don't quite match a particular API.
Plus, this opens up a whole slew of new features to poke at if boredom
overtakes, ahem.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The branch instruction has 6 bits per register operand which allows it
to specify a component in the register.
Fix codegen so that it outputs the right component, otherwise it always
outputs the x component.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
The macros already prepend "ppir: ", remove them from the actual strings
so it doesn't appear duplicated.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
The spilling code spills entire vec4 registers regardless of the
components used by the spilled uses.
The inserted stores code force the 4 components, but these loads were
using a variable number of components, causing bugs on loading the
spilled registers.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Fixes: a20a9d0c5e ("radv: dont store disasm string unless keep_shader_info flag set")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is a relatively minimal change to adjust all the gallium interfaces
to use bool instead of boolean. I tried to avoid making unrelated
changes inside of drivers to flip boolean -> bool to reduce the risk of
regressions (the compiler will much more easily allow "dirty" values
inside a char-based boolean than a C99 _Bool).
This has been build-tested on amd64 with:
Gallium drivers: nouveau r300 r600 radeonsi freedreno swrast etnaviv v3d
vc4 i915 svga virgl swr panfrost iris lima kmsro
Gallium st: mesa xa xvmc xvmc vdpau va
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The comment even justifies the wrongness wrongly.
We should be translating to pipe values properly here or else
fragment maps to tess ctrl.
Fixes: 3d7611e9a6 ("st/nir: use NIR for asm programs")
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
st_extensions.c sets const->MaxImageSamples (GL_MAX_IMAGE_SAMPLES) by
looping over [16, 15, .. 1x] MSAA modes, and RGBA/BGRA/ARGB/ABGR 8888
color formats, calling pipe->is_format_supported() for each, with
the usage set to PIPE_BIND_SHADER_IMAGE. If any are supported, it
selects that number of samples.
We were checking if sample_count <= 1, which meant that we were getting
a value of 1x MSAA, rather than the expected 0x (feature doesn't exist).
But, only on Icelake because Gen11 adds support for typed read messages
for R8G8B8A8_UNORM. The lack of typed read messages for these formats
was tricking the check on Gen9 to say no correctly. This caused some
Icelake conformance failures, because we don't implement this feature.
Just check for sample_count == 0 instead.
Glamor in xorg-server 1.20 cannot expose 16bpp pixmaps when running in
the usual 24bpp mode. This meant our 565 pbuffer configs would
ultimately fail to create a backing pixmap, leading to crashes.
To hack around this, make a 16bpp pixmap and try and export it.
If it works, expose the configs. Otherwise, just skip them.
This also disables them on DRI2. These configs were only added to pass
conformance requirements, and I doubt anybody cares about testing out
565 pbuffer visuals on DRI2-only drivers.
v2: Don't leak the fds (caught by Eric Anholt)
v3: Don't free(fds), it's not malloc'd
Fixes: dacb11a585 ("egl: Add a 565 pbuffer-only EGL config under X11.")
Reviewed-by: Eric Anholt <eric@anholt.net>
In commit dacb11a585, Eric found the first
matching 565 pbuffer config, and stopped. Our double-buffered configs
come first in the list, so we added that, making a pbuffer-only config
that claimed to be double buffered. This doesn't make sense, since
pixmaps/pbuffers are fundamentally not double buffered.
When using that config, every call to eglCreatePbufferSurface would fail
with EGL_BAD_MATCH. The call chain looks like this:
- eglCreatePbufferSurface
- dri3_create_pbuffer_surface
- dri3_create_surface
- dri2_get_dri_config
which eventually does:
const bool double_buffer = surface_type == EGL_WINDOW_BIT;
and then fails to find a matching config, because it ends up looking
for a single-buffered config - and there aren't any.
To fix this, make the 565 pbuffer config single-buffered. This fixes
at least 51 dEQP-EGL.* tests.
Fixes: dacb11a585 ("egl: Add a 565 pbuffer-only EGL config under X11.")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
pbuffer configs cause a million of these warnings to trigger, but
when using pixmaps or buffers, there is only one surface, so this
warning doesn't make much sense. Retain it for window surfaces for now.
Fixes: dacb11a585 ("egl: Add a 565 pbuffer-only EGL config under X11.")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
pbuffers are internally single-buffered. Marek fixed DrawBuffers to
handle this case, but we need to fix ReadBuffers too. Otherwise,
pretty much every conformance test fails because glReadPixels breaks.
v2: Refactor the switch into a helper (suggested by Eric Anholt)
Fixes: 35294f2eca ("mesa: fix pbuffers because internally they are front buffers")
Acked-by: Eric Engestrom <eric.engestrom@intel.com> (v1)
Reviewed-by: Eric Anholt <eric@anholt.net>
Check the assertion after error checking.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111194
Fixes: 9dd1f7cec0 ("mesa: pass gl_texture_object as arg to not depend on state")
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Normally, we haven't worried too much about stack sizes as Linux tends
to be fairly friendly towards large stacks. However, when running DXVK
apps under wine, we're suddenly subject to Windows' more stringent stack
limitations and can run out of space more easily. In particular, some
of the shaders in Elite Dangerous: Horizons have quite a few registers
and the arrays in split_virtual_grfs are large enough to blow a 1 MiB
stack leading to crashes during shader compilation.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108662
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
