Previously, we were accidentally assuming that the level of both textures
was 0. Now we actually use the correct level in our hacked texture view.
This doesn't 100% fix the meta path because the texture type is getting
lost somewhere in the pipeline. However, it actually copies to/from the
correct layer now.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: "10.3" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82804
Tested-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit b608cd7fbf)
Previously, we were using the source images level for both source and
destination. Also, we weren't taking the MinLevel from a potential texture
view into account. This commit fixes both problems.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: "10.3" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82804
Tested-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit fcb6d5b9ef)
*_update_db_shader_control depends on the alpha test state. The problem was
it was in a block which is only entered if the pixel shader is changed.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74863
Cc: mesa-stable@lists.freedesktop.org
Tested-by: Benjamin Bellec <b.bellec@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit 8abdc3c4a9)
A meta begin/end pair with MESA_META_DRAW_BUFFERS will change visible GL
state. We recreate the draw buffer enums from the buffer bitfield, which
changes GL_BACK to GL_BACK_LEFT (and GL_FRONT to GL_FRONT_LEFT).
This commit modifes the save/restore logic to instead copy the buffer enums
from the gl_framebuffer and then set them on restore using
_mesa_drawbuffers().
It's not clear how this breaks the benchmark in 82796, but fixing meta to not
leak the state change fixes the regression.
No piglit regressions.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=82796
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 8f55174fbd)
This reverts commit 0fbb9a599d.
Rather than adding hacks around the issue drop the sources from the
final tarball, and re-add them back with 'make dist'. This fixes a
problem when running parallel 'make install' fails as it recreates
sources and triggers partial recompilation.
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83355
Reported-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: Kai Wasserbäch <kai@dev.carbon-project.org>
(cherry picked from commit 5a4e0f3873)
coverity reported this, Matt said it look like missing parens,
not bad identing, so lets try that.
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 94a909ec2d)
The current code... makes no sense. Use nouveau_bo_ref to attach the bo
to the exposed resource so as to have the proper lifetime guarantees.
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 2c44043313)
With VP2, nv50_miptree is faked because the underlying bo's have to be
laid out in a certain way. This is done by adjusting the address. Make
sure that blits (and everything else for consistency) use the mt address
rather than the bo address as a base.
This fixes retrieving chroma plane with VDPAU.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82255
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 9d52e551a5)
The mt address is about to be used more, make sure it's set
appropriately.
Reported-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 2528d402b9)
When constant folding a MAD operation, we first fold the multiply and
generate an ADD. However we do so without making sure that the immediate
can be handled in the saturate case. If it can't, load the immediate in
a separate instruction.
Reported-by: Tiziano Bacocco <tizbac2@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 6c2b079231)
Experimentally, the sampler doesn't appear to like these, neither as
buffer nor as rect textures. So remove 1D from the list of texture types
to make linear when used for staging.
This fixes the OSD in mplayer for VDPAU.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 115d9a5525)
Samplers are only defined up to num_samplers, so set all samplers above
nr to NULL so that we don't try to read them again later.
Tested-by: Christian Ruppert <idl0r@qasl.de>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 362cd26960)
In certain circumstances, findFirstUses could end up doubling back on
instructions it had already processed, resulting in an infinite
recursion. Avoid this by keeping track of already-visited instructions.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83079
Tested-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit c4bb436f76)
Current method of generating distribution tar-balls involves manually
invoking make + target name in the appropriate places. This temporary
solution is used until we get 'make dist' working.
Currently it does not work, as in order to have the target (which is
also a filename) available in the final Makefile we need to add a PHONY
target + use the correct target name.
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 88cbe3908f)
According to the cited documentation section (but in the newer docs),
x_scaledown is the same for 2x and 4x MSAA.
+47 piglits.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83081
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: "10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit e34a363a78)
The first UVD generation can only do frame based output.
Signed-off-by: Christian König <christian.koenig@amd.com>
(cherry picked from commit 80771e47b6)
Nominated-by: Alex Deucher <alexdeucher@gmail.com>
Otherwise we clear areas that shouldn't be cleared.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 03a99ba9e4)
We've found that there's a buffer overrun bug in flex that's triggered by
using alternation in a lookahead pattern.
Fortunately, we don't need to match the exact {NEWLINE} expression to
detect an empty pragma. It suffices to verify that there are no non-space
characters before any newline character. So we can use a simple [\r\n] to
get the desired behavior while avoiding the flex bug.
Fixes the regression of piglit's 17000-consecutive-chars-identifier test,
(which has been crashing since commit
04e40fd337 ).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82472
Signed-off-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
CC: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 23163df24c)
We switched to these several stable releases ago, (since the MD5 algorithm has
been broken for some time), but only now did I get around to fixing this in
the Makefile rather than just performing this step manually.
CC: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 46d03d37bf)
The optimization relies on CMP setting the destination to 0, which is
equivalent to 0.0f. However, early platforms only set the least
significant byte, leaving the other bits undefined. So, we must disable
the optimization on those platforms.
Oddly, Sandybridge wasn't reported as broken. The PRM states that it
only sets the LSB, but the internal documentation says that it follows
the IVB behavior. Since it wasn't reported as broken, we believe it
really does follow the IVB behavior.
v2: Allow the optimization on Sandybridge (requested by Matt).
+32 piglits on Ironlake.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?=79963
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 97d03b9366)
If only the flat/smooth shade state changed between
two render calls the prior code would miss updating the
hardware state.
Also add check for sprite coord, potentially same type
of issue otherwise for it.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81967
Signed-off-by: Glenn Kennard <glenn.kennard@gmail.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
cs_vertex_buffer_state.enabled_mask and
cs_vertex_buffer_state.dirty_mask are both updated when
r600_set_constant_buffer() is called, so we don't need to manually
update these values.
This fixes a crash with OpenCL programs that have a kernel with no
arguments.
https://bugs.freedesktop.org/show_bug.cgi?id=82671
CC: "10.2" <mesa-stable@lists.freedesktop.org>
Unlocking the texture is not safe: another thread could come in and grab
it. Now that we use a recursive mutex, this should work. This also fixes
texture lock deadlocks in the new meta fast clear path.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Tested-by: Chris Forbes <chrisf@ijw.co.nz>
This avoids problems with things like meta operations calling functions
that want to take the lock while the lock is already held. Basically,
the point is to guard against API reentrancy across threads...not to
guard against ourselves.
Dave Airlie opposed this change, but it makes master usable again and no
one proposed a better solution. We can revert this if/when someone
does.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Tested-by: Chris Forbes <chrisf@ijw.co.nz>
There were two problems with the way this script used sed on OS X:
1. The OS X sed doesn't interpret "\r" in a replacement list as a
carriage-return character, (instead it was inserting a literal
'r' character).
We fix this by putting an actual ^M character into the source of
the script, (rather than a two-character escape sequence hoping
for sed to do the right thing).
2. When generating the test files with LF-CR ("\n\r") newlines, the
OS X sed was adding an undesired final newline ("\n") at the end
of the file. We avoid this by first using sed to add the ^M
before the newlines, then using tr to swap the \r and \n
characters. This way, sed never sees any lines ending with
anything but \n, so it doesn't get confused and doesn't add any
bogus extra newlines.
Tested-by: Vinson Lee <vlee@freedesktop.org>
Vinson's testing confirmed that this patch fixes FreeBSD as well.
I noticed that with /bin/sh on Mac OS X, "echo -n" does not work as
desired, (it actually prints "-n" rather than suppressing the final
newline). There is a /bin/echo that could be used (it actually works)
instead of the builtin echo.
But I decided it's more robust to just use printf rather than
hardcoding /bin/echo into the script.
This LLVM 3.6 commit changed EngineBuilder constructor.
commit 3f4ed32b4398eaf4fe0080d8001ba01e6c2f43c8
Author: Rafael Espindola <rafael.espindola@gmail.com>
Date: Tue Aug 19 04:04:25 2014 +0000
Make it explicit that ExecutionEngine takes ownership of the modules.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215967 91177308-0d34-0410-b5e6-96231b3b80d8
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
The docs say "When performing a render target resolve, PIPE_CONTROL with end
of pipe sync must be delivered.", which doesn't actually tell us whether we
need to do it before or after. Blorp did it before and after, and doing it
before certainly makes sense. The resolve operation needs to read from the
MCS and if we don't flush the render cache it won't get up-to-date data.
On the other hand, doing it after should not be necessary, since we call
brw_render_cache_set_check_flush() after the resolve.
Fixes rendering corruption in kwin's cover switch effect and various steam
games.
Missing flush spotted by Ken.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
The extension requires GL 3.0, so enable on just the generations
exposing that.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
