The former is supported on Matrox cards but no other hw.
The latter isn't supported anywhere.
It is fine to not advertise them as supported,
and it could prevent apps to trigger weird rendering paths.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If D3D_ALWAYS_SOFTWARE is set for debugging purposes,
run on any DRI enabled platform.
Instead of probing for a compatible gallium driver (which might
fail if there's none) always use the KMS DRI software renderer.
Allows to run nine on i915 when D3D_ALWAYS_SOFTWARE=1.
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <davyaxel0@gmail.com>
I do not see any perf impact on radeonsi, but it
seems iris needs this.
It seems something sensible to do.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Andre Heider <a.heider@gmail.com>
This broke piles of image load store tests (179 failures on CI,
mesa_master build #15546, previous build right before this landed
was green). I'd rather not leave the tree on fire over the weekend,
so let's revert for now, and we can figure out what happened next week.
No shader-db changes on any Intel platform.
v2: Use a loop to generate patterns. Suggested by Jason.
Reviewed-by: Matt Turner <mattst88@gmail.com> [v1]
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
No shader-db changes on any Intel platform.
v2: Use a loop to generate patterns. Suggested by Jason.
Reviewed-by: Matt Turner <mattst88@gmail.com> [v1]
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
No shader-db changes on any Intel platform.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Now that nir_opt_copy_prop_vars can properly handle array derefs on
vectors, it's safe to move UBO and SSBO lowering to late in the
pipeline. This should allow NIR to actually start optimizing SSBO
access.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
It doesn't really matter where this pass goes as long as it's after we
call nir_lower_explicit_io and before we go into the back-end. Putting
it brw_postprocess_nir lets us move nir_lower_explicit_io significantly
later in the pipeline.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Which also requires uadd_carry lowering
Until recently this was lowered in glsl ir so it went unnoticed that we
weren't lowering it.
Fixes: 1d8994a63b glsl: [u/i]mulExtended optimization for GLSL
Signed-off-by: Rob Clark <robdclark@gmail.com>
Fixes: 45271702ec freedreno: fix ir3_cmdline build
Fixes: 7530d4abfc glsl/freedreno/panfrost: pass gl_context to the standalone compiler
Signed-off-by: Rob Clark <robdclark@gmail.com>
With createImage(), the caller was expected to set a SHARED flag if they
needed the ability to get a GEM handle. DRI3, wayland, and gbm all set
it, EGL_MESA_drm_image passes it through, and surfaceless doesn't need it
because there's no way to request a handle.
With the new createImageWithModifiers() DRI method to replace it, the
expectation is that you'll always be able to share the buffer, so the flag
is unnecessary in its arguments. However, we do need to tell gallium
about this expectation.
Without this, kmscube's modifiers path using
gbm_bo_create_with_modifiers(&modifier, 1) instead of
gbm_bo_create(SCANOUT | SHARED) will call the driver's resource_create()
function wtih PIPE_BIND_SHARED unset, so the driver (particularly
renderonly drivers) may allocate in such a way that it can't return an
answer from gbm_bo_get_handle(). I used to have a hack in v3d using
count==1 && modifier==LINEAR to indicate that you wanted SHARED anyway,
but that was dropped recently.
Fixes: 59527a36e9 ("v3d: Restructure RO allocations using
resource_from_handle.")
Reviewed-by: Kristian H. Kristensen <hoegsberg@chromium.org>
This is similar to intel_miptree_map_blit and intel_buffer_object.c's
temporary blits in i965.
Improves performance of DiRT Rally by 20-25% by eliminating stalls.
Breaks piglit's spec/arb_shader_image_load_store/host-mem-barrier,
by using the GPU to do uploads, exposing a st/mesa issue where it
doesn't give us memory_barrier() calls. This is a pre-existing issue
and will be fixed by a later patch (currently out for review).
Reported-by: Clayton Craft <clayton.a.craft@intel.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=109944
Fixes: e1d81decf7 "build: make passing an incorrect pointer type a hard error"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
for fragment programs we already treat fog as a single component value,
but for vp we didn't.
Fixes fog related piglit tests with my out of tree Nouveau nir patches.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Return immediately if last VS URB entry size is good enough for BLORP
operation
v2: Fix comments (Caio)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Suggested-by: Kenneth Graunke<kenneth@whitecape.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: 1) Set IRIS_DIRTY_URB bit (Caio)
2) Get rid of unnecessary function (Caio)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Suggested-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Everything else uses `#include "GL/internal/dri_interface.h"` instead,
and this full path was even already used in other parts of GLX.
While at it, nothing uses `inc_gl_internal` anymore so let's remove it
as well.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Tested-by: Clayton Craft <clayton.a.craft@intel.com>
Since the compiler may not zero-out padding in the object.
Add a couple comments about this to prevent misunderstandings in
the future.
Fixes: 67d96816ff ("st/mesa: move, clean-up shader variant key decls/inits")
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
More or less any of this issue pointed out by the compiler is
a coding error. Make sure we flag it and bail loudly.
v2: - apply the change to autotools and scons as well (Emil)
- C++ doesn't need this, it's already an error and the flag
doesn't exist (Gert)
v3: - drop scons, flags are not checked so until someone adds that
functionality we can't have this.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com> # v1
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> # v1
[Emil: apply the same change to autotools and scons]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Fixes: 45d58cd91567b39f51af "gitlab-ci: only build the default (=latest) and oldest llvm versions"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
GLVND already provides these, so distro packagers have been deleting
them all along. Let's save ourselves the trouble and not build them in
the first place.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
GLVND already provides these, so distro packagers have been deleting
them all along. Let's save ourselves the trouble and not build them in
the first place.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This fixes a rendering issue where UBO updates aren't always picked
up by drawing calls. This issue effected the Webots robotics
simulator. VMware bug 2175527.
Testing Done: Webots replay, piglit, misc Linux games
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
The draw_vgpu10() function was huge. Move the code for preparing the
vertex buffers and the index buffer into separate functions.
Reviewed-by: Neha Bhende <bhenden@vmware.com>
And add a comment that we're implicitly converting PIPE_TRANSFER_
flags to PB_USAGE_ flags in one place. And statically assert that
the enum values match.
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Use a new enum type instead of 'unsigned' to make things a bit more
understandable.
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
With this patch, the svga shader type will be saved in the shader variant,
and there is no need to pass in the shader type to the define/destroy
variant functions.
Reviewed-by: Brian Paul <brianp@vmware.com>
From the ARB_enhanced_layouts specification:
"For the property TRANSFORM_FEEDBACK_BUFFER_INDEX, a single integer
identifying the index of the active transform feedback buffer
associated with an active variable is written to <params>. For
variables corresponding to the special names "gl_NextBuffer",
"gl_SkipComponents1", "gl_SkipComponents2", "gl_SkipComponents3",
and "gl_SkipComponents4", -1 is written to <params>."
We were storing the xfb_buffer value, instead of the value
corresponding to GL_TRANSFORM_FEEDBACK_BUFFER_INDEX.
Note that the implementation assumes that varyings would be sorted by
offset and buffer.
Signed-off-by: Antia Puentes <apuentes@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Instead of a custom ARB_gl_spirv xfb gather info pass.
In fact, this is not only about reusing code, but the current custom
code was not handling properly how many varyings are enumerated from
some complex types. So this change is also about fixing some corner
cases.
v2: Use util_bitcount, simplify current stage check (Kenneth)
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
