NIR i/o lowering and sysval lowering can handle the compact var fine at
this point.
Affects: nouveau, virgl, svga, radeonsi, r600, llvmpipe. Does not affect
PIPE_CAP_NIR_COMPACT_ARRAYS drivers like crocus, iris, d3d12, freedreno,
zink.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21940>
Now that we don't do GLSL IR constant propagation or constant folding, we
can leave constant variable detection and handling to NIR. This also
avoids some OOB array access in GLSL IR in a piglit test!
Freedreno stats again look like noise:
total instructions in shared programs: 2718412 -> 2718746 (0.01%)
instructions in affected programs: 80497 -> 80831 (0.41%)
total last-baryf in shared programs: 110015 -> 110510 (0.45%)
last-baryf in affected programs: 35263 -> 35758 (1.40%)
total full in shared programs: 189486 -> 189480 (<.01%)
full in affected programs: 52 -> 46 (-11.54%)
total constlen in shared programs: 494540 -> 494496 (<.01%)
constlen in affected programs: 452 -> 408 (-9.73%)
total sstall in shared programs: 198297 -> 197928 (-0.19%)
sstall in affected programs: 3691 -> 3322 (-10.00%)
total systall in shared programs: 432150 -> 431799 (-0.08%)
systall in affected programs: 6070 -> 5719 (-5.78%)
total waves in shared programs: 435098 -> 435110 (<.01%)
waves in affected programs: 92 -> 104 (13.04%)
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21751>
NIR is happy to take care of constant folding for us, and it's easier to
do in SSA.
This required adjusting of lower_precision unit tests to have un-folded
constants.
freedreno results look like noise. Some excerpts:
total instructions in shared programs: 2718343 -> 2718412 (<.01%)
instructions in affected programs: 6847 -> 6916 (1.01%)
total last-baryf in shared programs: 109992 -> 110015 (0.02%)
last-baryf in affected programs: 117 -> 140 (19.66%)
total sstall in shared programs: 198312 -> 198297 (<.01%)
sstall in affected programs: 148 -> 133 (-10.14%)
total systall in shared programs: 432163 -> 432150 (<.01%)
systall in affected programs: 1016 -> 1003 (-1.28%)
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21751>
We already have a nir_builder equivalent for generating this code, just
use that instead of doing it in GLSL.
No change on r300 shader-db.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21476>
GLSL's lower_vector_derefs already does this, and even if it didn't
nir_vector_extract() would when glsl-to-nir happens.
No effect on freedreno shader-db.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18466>
nir_lower_vars_to_ssa will split temp structs up anyway. This fixes a bug
where mediump wouldn't be propagated to the split vars.
The effect is tiny, I think just shuffling some code scheduling from
optimizing at different places. Affects Natural Selection 2, Serious Sam
3, 3dmark slingshot, and Lego Legacy.
freedreno shader-db:
total instructions in shared programs: 11315637 -> 11315993 (<.01%)
instructions in affected programs: 24861 -> 25217 (1.43%)
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18466>
nir_lower_vars_to_ssa will split temp arrays up anyway. Fixes a bug where
split arrays wouldn't get their precision qualifier.
Helps mostly Android and skia shaders. Also affects Civ5, Witcher 2, and
Borderlands 2.
freedreno shader-db:
total instructions in shared programs: 11319395 -> 11319355 (<.01%)
instructions in affected programs: 65744 -> 65704 (-0.06%)
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18466>
We have fine NIR lowering for this (already called from mesa/st), no need
for a separate GLSL pass.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18361>
Every driver uses the nir_lower_system_values path now.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18327>
The nir_opt_conditional_discard pass is called anyway and covers
discard/demote/terminate.
iris shader-db:
total instructions in shared programs: 8933422 -> 8933426 (<.01%)
instructions in affected programs: 48 -> 52 (8.33%)
helped: 0
HURT: 4
which is a synmark shader going from 12 to 13 instrs.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17664>
It will get turned into SSA and copy-propagated in NIR, no need to walk
the IR collapsing it here.
iris shader-db results appear to be noise:
total instructions in shared programs: 8932195 -> 8932147 (<.01%)
instructions in affected programs: 537 -> 489 (-8.94%)
LOST: 12
GAINED: 11
lost/gained are simd32 switches in unigine, l4d2, portal2, asphalt9.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17613>
Now that we have no non-NIR drivers, we can retire the old code. We just
need to pass the variable accesses through to it.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17610>
Since we have now switched all drivers to using NIR and therefore
the NIR based uniform linker this param never needs to be set to
true so remove it.
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16924>
nir_lower_int_to_float() does this at the end of compilation, no need to
do it up front.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16823>
NIR has fdiv, and all the NIR backends have to have lower_fdiv set
appropriately already since various passes (format conversions,
tgsi_to_nir, nir_fast_normalize(), etc.) might generate one.
This causes softpipe and llvmpipe to now do actual divides, since
lower_fdiv is not set there. Note that llvmpipe's rcp implementation is a
divide of 1.0 by x, so now we're going to be just doing div(x, y) instead
of mul(x, div(1.0, y)).
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16823>
It's way more concise to write as nir_builder calls.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16823>
The drivers not setting it were:
- nv30, which gets lowering using NIR's lower_fsat flag.
- r300, which gets lowering using NIR's lower_fsat flag.
- a2xx, which has was getting it optimized back to fsat anyway.
This drops the check for the cap from gallium nine. While nine does have
a non-nir path, I think it's safe to assume that if you have SM3
texturing, you can do fsat.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16823>
NIR already has the necessary lowering, and the GLSL lowering violates
GLSL IR validation rules. Once quadop lowering was turned off, the IR
validation at the end of the compile path on DEBUG builds caught the
problem.
In order to move the lowering to NIR, though, we need to make sure that
drivers supporting these functions actually have the lowering flag set.
xfails added for t860, where apparently this tickles a variety of existing
64-bit bugs in the backend.
Fixes: #6461
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Mykhailo Skorokhodov <mykhailo.skorokhodov@globallogic.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16437>
The single caller of this function (in st_glsl_to_ir.cpp) always passes
false, so this is dead code.
v2: Delete convert_vec_index_to_cond_assign method because all the
callers are deleted too.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16440>
As of ca63a5ed3e ("glsl: fix interpolateAtXxx(some_vec[idx], ...) with
dynamic idx"), this lowering pass does two things. It converts
ir_binop_vector_extract to an if-ladder to select the dynamically
indexed component, and it extracts a ir_binop_vector_extract from the
source of an interpolateAt function and applies to the result instead.
This change adds a flag to disable the former behavior. The latter is
still useful, but NIR has better (and soon even better) ways of doing
the former.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16440>
Now that everybody goes through NIR, glsl_to_nir is happy to handle the
instruction and turn it into nir_op_vec4 instead of going to a temp
variable and back.
No changes on freedreno shader-db.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16363>
Now that everything goes through NIR, nir_opt_peephole_select has replaced
it.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8044>
All UBO-supporting drivers now go through the NIR path, which does a
better job of it.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8044>
This was last used with Mesa classic, in _mesa_ir_link_shader().
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15623>
This was last used with i915c, now lower_fpow covers this class of
lowering.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15623>
Nothing here that NIR doesn't do. No effect on shader-db of hsw or
softpipe.
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14249>
Nothing uses it, and i965 was the last thing to. Even if I enable it for
softpipe or crocus, it quickly causes NIR validation failures in shader-db
from swizzles outside the bounds of vectors. Retire it in favor of
nir_opt_vectorize().
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14249>
Doing so allow you to easily tell what the pass did using the existing
infrastructure in the OPT macro.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10292>
Version 4.4 of the GLSL spec changed the definition of noise*() to
always return zero and earlier versions of the spec allowed zero as a
valid implementation.
All drivers, as far as I can tell, unconditionally call lower_noise()
today which turns ir_unop_noise into zero. We've got a 10-year-old
comment in there saying "In the future, ir_unop_noise may be replaced by
a call to a function that implements noise." Well, it's the future now
and we've not yet gotten around to that. In the mean time, the GLSL
spec has made doing so illegal.
To make things worse, we then pretend to handle the opcode in
glsl_to_nir, ir_to_mesa, and st_glsl_to_tgsi even though it should never
get there given the lowering. The lowering in st_glsl_to_tgsi defines
noise*() to be 0.5 which is an illegal implementation of the noise
functions according to pre-4.4 specs. We also have opcodes for this in
NIR which are never used because, again, we always call lower_noise().
Let's just kill the whole opcode and make builtin_builder.cpp build a
bunch of functions that just return zero.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4624>
