It doesn't do anything yet. We leave that to the subsequent patches so we can
keep the tree-wide refactor as simple as possible.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23089>
utrace submits can either have a batch or not.
When there is a batch, the utrace vk_sync is signaled by the utrace
batch (because utrace does a timestamp buffer copy using its own
batch). When there is no batch, the utrace vk_sync should be signaled
by the application batch (no timestamp copy required, utrace can read
the timestamps when the application batch has completed).
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: fdea48df5e ("anv: Implement Xe version of anv_queue_exec_locked() and queue_exec_trace()")
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24085>
From Bspec 46959, a programming note applicable to Gfx12+:
"Since HZ_OP has to be sent twice (first time set the clear/resolve
state and 2nd time to clear the state), and HW internally flushes the
depth cache on HZ_OP, there is no need to explicitly send a Depth
Cache flush after Clear or Resolve."
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24027>
According to Bspec, COMPCS0_CCS_AUX_INV register offset
is 042C8h and COMPCS0_AUX_TABLE_BASE_ADDR is defined to 042C0h.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23958>
OpenCL 3.0 core requires __opencl_c_subgroups to be set, the OpenCL
cl_khr_subgroups extenions can only be enabled if and only if the driver
guarentees independent forward progress between subgroups.
See CL_DEVICE_SUB_GROUP_INDEPENDENT_FORWARD_PROGRESS for more information.
Signed-off-by: Karol Herbst <git@karolherbst.de>
Reviewed-by: Nora Allen <blackcatgames@protonmail.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22893>
We're interested in a Vulkan-only stack in Chrome OS, where Android's GLES
would be provided by ANGLE-over-Venus-over-ANV. Let's get some testing
covering ANGLE-on-ANV first.
This is structured as a single partial job pre-merge to catch most
regressions, and a longer manual job to do full coverage for when you need
to update the xfails list.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20163>
From Broxton and Kabylake, it started supporting HEVC 10-bit decoding.
Fixes: 649e12c897 ("anv_video: reject decoding of unsupported profiles
and formats")
Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23985>
bo->offset is set as canonical address no need to do it over again.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23977>
anv_vma_alloc() returns a canonical address, but explicit_address is a
regular address. This mismatch can potentially cause issues.
So here making bo->offset as always canonical address by converting it
in the explicit case and fixing the only caller that was caling
anv_bo_vma_alloc_or_close() with a canonical address.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23977>
Sets the float color component type in st_visual_to_context_mode()
ensuring float color values are not clamped.
Fixes dEQP-EGL.functional.wide_color.window_fp16_default_colorspace on
asahi, iris and most likely every other driver having it marked as fail
or flake.
Closes: mesa/mesa#9276
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: David Heidelberg <david.heidelberg@collabora.com>
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23914>
There is no mention in spec about subtract one of the number of
threads, also Iris and blorp code don't subtract.
Alchemist PRMs: Volume 2a: Command Reference: Instructions: CFE_STATE: Maximum Number of Threads:
Normally set to the maximum number of threads: (# EUs) * (# threads/EU)
Cc: mesa-stable
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23973>
Depth/stencil surfaces cannot be linear but they can be 1D, so they
end up being tile64 when sparse (as we force every sparse resource to
be either tile64 or linear).
According to the "1D surfaces" page from BSpec, our driver treats 1D
surfaces as 2D surfaces with a height of 1 texel, since we don't
enable the corresponding bit from HAS_SLICE_CHICKEN7. And since we
support 2D surfaces, we should also support 1D.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22974>
I went through the RENDER_SURFACE_STATE docs today and found a number
of fields that are simply gone, marked as "must be zero", or had their
enum meanings change. Update those here.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23684>
This bit no longer exists and is marked MBZ. I assume that the
optimization is just permanently enabled; this was always a basically
a chicken bit.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23684>
The HW not returning the depth value we would like for
VK_EXT_sliced_view_of_3d, we can pull that value by reading the
RENDER_SURFACE_STATE struct directly.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23868>
On DG2 I ran into a case where the surface state was not being decoded
with INTEL_DEBUG=bat. This is because the surface states are not part
of a state pool there anymore. Instead BO are allocate manually and
placed in vma heap.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 96c33fb027 ("anv: enable direct descriptors on platforms with extended bindless offset")
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23891>
The Vulkan specification indicates that if memory types have
properties which are a strict subset of another type's, then they
should appear before that memory type. Otherwise the specification
does not require a specific ordering of memory types.
But, it appears that Aztec Ruins and the Vulkan CTS make an assumption
that the first host-accessible memory type is host-coherent and select
it when they expect data written by the CPU to become visible without
calling vkFlushMappedMemoryRanges(), even though flushing is required
by the spec, which leads to misrendering and hangs on MTL platforms.
We found that other drivers also put a host-coherent, but not cached
memory type as the first host-accessible memory type, so let's do the
same in order to match the expectations of such broken applications.
Host-coherent uncached memory types are currently implemented with a
WC CPU map on non-LLC platforms, so there shouldn't be a huge
performance penalty from this: If an application intends to do heavy
R/W CPU access on a memory range it's expected to loop over the
available memory types and select one marked as host-cached -- If an
application fails to do that and simply selects the first available
type it seems more robust to stay on the safe side and give them a
host-coherent type rather than a cached one.
Rework:
* Jordan: Add initial explanation to body of commmit message.
* Curro: Add additional comments to commit message.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22878>
These modifications represent:
* changes to defects made since May 24, 2023
* changes to handling of defects which were manually cloned
Acked-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23865>
Although the following is based on this observations for OpenGL, we
probably need this for Vulkan as well.
KHR-GL46.texture_buffer.texture_buffer_operations_ssbo_writes writes
to an SSBO in a compute program, then issues a memory-barrier, which
causes us to add a DC-flush. Then a second compute program samples
from the SSBO written by the first compute program.
Although we expected the DC-flush to make the writes available to the
second compute program, on MTL this wasn't the case. Adding the
"Untyped Data-Port Cache Flush" fixes this.
The PRM indicates that compute programs must set "Untyped Data-Port
Cache Flush" to flush some LSC writes when flushing HDC. Although we
are setting DC-flush, and not HDC-flush, it does appear that the
following reference might also apply to DC-flush.
In the Intel(R) Arc(tm) A-Series Graphics and Intel Data Center GPU
Flex Series Open-Source Programmer's Reference Manual, Vol 2a: Command
Reference: Instructions, PIPE_CONTROL, HDC Pipeline Flush (DWord 0,
Bit 9), there is a programming note:
> When the "Pipeline Select" mode is set to "GPGPU", the LSC Untyped
> L1 cache flush is controlled by "Untyped Data-Port Cache Flush" bit
> in the PIPE_CONTROL command.
Ref: a8108f1d44 ("anv: Add missing untyped data port flush on PIPELINE_SELECT")
Ref: bd8e8d204d ("iris: Add missing untyped data port flush on PIPELINE_SELECT")
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23176>
