According to the hardware docs a DC flush is sufficient to make
CS_STALL happy, there's no need to add STALL_AT_SCOREBOARD whenever
it's present.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
This will make sure that we recalculate the URB layout anytime the URB
size is modified by the L3 partitioning code.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
This stores the result of can_do_pipelined_register_writes() in the
context struct so we can find out later whether LRI can be used to
program the L3 configuration.
v2:
* Split change of gen check in can_do_pipelined_register_writes (jljusten)
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Allow for pipelined register writes for gen < 7.
v2:
* Split from another patch and adjust comment (jljusten)
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
This adds the double code to the geometry shader input handling.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This handles loading doubles from LDS properly.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Cc: "11.0 11.1" <mesa-stable@lists.fedoraproject.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes:
glsl-1.50/execution/geometry/dynamic_input_array_index.shader_test
my profanity.
We need to load the AR register with the value from the index reg
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes:
gs-input-array-vec4-index-rd
The others run out of gprs unfortunately.
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes:
arb_transform_feedback3-ext_interleaved_two_bufs_gs
arb_transform_feedback3-ext_interleaved_two_bufs_gs_max
transform-feedback-builtins
If we are only emitting one ring, then emit all output
buffers on it.
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: update relnotes]
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
See: `commit e82c527f1fc2f8ddc64954ecd06b0de3cea92e93`
which is where a block in src maps to a pixel in dst and vice versa.
e.g. DXT1 <-> R32G32_UINT
DXT5 <-> R32G32B32A32_UINT
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The only effect here is a space savings - 822 programs in shader-db
affected with the following overall change:
total bytes used in shared programs : 44154976 -> 44139880 (-0.03%)
Fixes: 641eda0c (nv50/ir: r63 is only 0 if we are using less than 63 registers)
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
This allows us to use the short encoding, and potentially fold
immediates in later on.
total instructions in shared programs : 6379731 -> 6367861 (-0.19%)
total gprs used in shared programs : 728502 -> 728683 (0.02%)
total local used in shared programs : 9904 -> 9904 (0.00%)
total bytes used in shared programs : 44661008 -> 44154976 (-1.13%)
local gpr inst bytes
helped 0 51 7267 20306
hurt 0 232 125 274
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Operations that take immediates can only encode registers up to 64. This
fixes a shader in a "Powered by Unity" intro.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
We already semi-did this but the list of uses as unsorted, so it was
unreliable. Sort the uses by bb and serial, and don't unspill for each
instruction in a sequence. (And also don't unspill multiple times for a
single instruction that uses the value in question multiple times.)
This causes a minor reduction in generated instructions for shader-db
(as few programs spill) but more importantly it brings determinism to
each run's output.
On SM10:
total instructions in shared programs : 6387945 -> 6379359 (-0.13%)
total gprs used in shared programs : 728544 -> 728544 (0.00%)
total local used in shared programs : 9904 -> 9904 (0.00%)
local gpr inst bytes
helped 0 0 322 322
hurt 0 0 0 0
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
This fixes the fetching of fp64 inputs to the geometry shader,
this fixes the recently posted piglit's
arb_gpu_shader_fp64/execution/gs-fs-vs-double-array.shader_test
arb_vertex_attrib_64bit/execution/gs-fs-vs-attrib-double-array.shader_test
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com> [v1]
Reviewed-by: Eric Anholt <eric@anholt.net> [v1]
v2: Move new rule to Boolean simplification section
Add a a@bool != true simplification
Suggested-by: Neil Roberts <neil@linux.intel.com>
... and allow the "binding" qualifier in ES 3.1 as well.
GLSL ES 3.1 incorporates only a few features from the extension
ARB_shading_language_420pack: the relaxed qualifier ordering
requirements and the binding qualifier.
Cc: "11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
These features would not have been enabled with #version 420 otherwise.
Cc: "11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
This interaction was missed in the addition of ARB_image_load_store.
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93266
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Unforunately the Appveyor -> SourceForge connection seems a bit
unreliable, causing frequent build failures while downloading
winflexbison (approx once every 2 days).
Fetching winflexbison archive into Appveyor's cache should eliminate
these.
Fetching Python modules from PyPI doesn't seem to be a problem, so they
are left alone for now, though they could eventually get the same
treatment.
We still have several failures in the newly enabled tests in simulation:
sRGB downsampling is done as if it was just linear, stencil blits are not
supported on MSAA either, and derivatives are still not supported
(breaking some MSAA simulation shaders). So, other than sRGB downsampling
quality, things seem to be in good shape.
This is the core of ARB_texture_multisample. Most of the piglit tests for
GL_ARB_texture_multisample require GL 3.0, but exposing support for this
lets us use the gallium blitter for multisample resolves. We can
sometimes multisample resolve using just the RCL, but that requires that
the blit is 1:1, unflipped, and aligned to tile boundaries.
This includes GL_SAMPLE_COVERAGE, GL_SAMPLE_ALPHA_TO_ONE, and
GL_SAMPLE_ALPHA_TO_COVAGE.
I haven't implemented a dithering function yet, and gallium doesn't give
me a good chance to do so for GL_SAMPLE_COVERAGE.
I only stumbled on this while experimenting due to reading about HW-2905.
I don't know if the EZ disable in the Z-clear is actually necessary, but
go with it for now.
The recent unaligned fix successfully prevented RCL blits that weren't
aligned inside of the surface, but we also want to be able to do RCL blits
for the whole surface when the width or height of the surface aren't
aligned (we don't care what renders inside of the padding).
This commit pushes makes uniform offsets be terms of bytes starting with
nir_lower_io. They get converted to be in terms of vec4s or floats when we
cram them in the UNIFORM register file but reladdr remains in terms of
bytes all the way down to the point where we lower it to a pull constant
load.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The one and only place where the FS backend allows reladdr is on uniforms.
For locals, inputs, and outputs, we lower it away before the backend ever
sees it. This commit gets rid of the dead indirect handling code.
Cc: "11.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, the VS_OPCODE_PULL_CONSTANT_LOAD opcode operated on
vec4-aligned byte offsets on Iron Lake and below and worked in terms of
vec4 offsets on Sandy Bridge. On Ivy Bridge, we add a new *LOAD_GEN7
variant which works in terms of vec4s. We're about to change the GEN7
version to work in terms of bytes, so this is a nice unification.
Cc: "11.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
It is legal to have a texture view of a single layer from a 2D array texture;
you can sample from it, or render to it. Intel hardware needs to be made aware
when it is using a 2d array surface in the surface state. The texture view is
just a 2d surface with the backing miptree actually being a 2d array surface.
This caused the previous code would not set the right bit in the surface state
since it wasn't considered an array texture.
I spotted this early on in debug but brushed it off because it is clearly not
needed on other platforms (since they all pass). I have no idea how this works
properly on other platforms (I think gen7 introduced the bit in the state, but I
am too lazy to check). As such, I have opted not to modify gen7, though I
believe the current code is wrong there as well.
Thanks to Chris for helping me debug this.
v2: Just use the underlying mt's target type to make the array determination.
This replaces a bug in the first patch which was incorrectly relying only
on non-zero depth (not sure how that had no failures). (Ilia)
Cc: Chris Forbes <chrisf@ijw.co.nz>
Reported-by: Mark Janes <mark.a.janes@intel.com> (Jenkins)
References: https://www.opengl.org/registry/specs/ARB/texture_view.txt
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92609
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
For some reason this has been disabled for integers ever since codegen
was merged, despite there being emission code for IMAD. Seems to work.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
