On one side, when emitting 3DSTATE_SF, VertexSubPixelPrecisionSelect is
used to select between 8 bit subpixel precision (value 0) or 4 bit
subpixel precision (value 1). As this value is not set, means it is
taking the value 0, so 8 bit are used.
On the other side, in the Vulkan CTS tests, if the reference rasterizer,
which uses 8 bit precision, as it is used to check what should be the
expected value for the tests, is changed to use 4 bit as ANV was
advertising so far, some of the tests will fail.
So it seems ANV is actually using 8 bits.
v2: explicitly set 3DSTATE_SF::VertexSubPixelPrecisionSelect (Jason)
v3: use _8Bit definition as value (Jason)
v4: (by Jason)
anv: Explicitly set 3DSTATE_CLIP::VertexSubPixelPrecisionSelect
This field was added on gen8 even though there's an identically defined
one in 3DSTATE_SF.
CC: Jason Ekstrand <jason@jlekstrand.net>
CC: Kenneth Graunke <kenneth@whitecape.org>
CC: 18.3 19.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
On GLSL that info is set as a layout qualifier when redeclaring
gl_FragCoord, so somehow tied to a specific variable. But in practice,
they behave as a global of the shader. On ARB programs they are set
using a global OPTION (defined at ARB_fragment_coord_conventions), and
on SPIR-V using ExecutionModes, that are also not tied specifically to
the builtin.
This patch moves that info from nir variable and ir variable to nir
shader and gl_program shader_info respectively, so the map is more
similar to SPIR-V, and ARB programs, instead of more similar to GLSL.
FWIW, shader_info.fs already had pixel_center_integer, so this change
also removes some redundancy. Also, as struct gl_program also includes
a shader_info, we removed gl_program::OriginUpperLeft and
PixelCenterInteger, as it would be superfluous.
This change was needed because recently spirv_to_nir changed the order
in which execution modes and variables are handled, so the variables
didn't get the correct values. Now the info is set on the shader
itself, and we don't need to go back to the builtin variable to set
it.
Fixes: e68871f6a ("spirv: Handle constants and types before execution
modes")
v2: (Jason)
* glsl_to_nir: get the info before glsl_to_nir, while all the rest
of the info gathering is happening
* prog_to_nir: gather the info on a general info-gathering pass,
not on variable setup.
v3: (Jason)
* Squash with the patch that removes that info from ir variable
* anv: assert that OriginUpperLeft is true. It should be already
set by spirv_to_nir.
* blorp: set origin_upper_left on its core "compile fragment
shader", not just on some specific places (for this we added an
helper on a previous patch).
* prog_to_nir: no need to gather specifically this fragcoord modes
as the full gl_program shader_info is copied.
* spirv_to_nir: assert that we are a fragment shader when handling
this execution modes.
v4: (reported by failing gitlab pipeline #18750)
* state_tracker: update too due changes on ir.h/gl_program
v5:
* blorp: minor change after change on previous patch
* radeonsi: update due this change.
v6: (Timothy Arceri)
* prog_to_nir: remove extra whitespace
* shader_info: don't use :1 on origin_upper_left
* glsl: program.fs.origin_upper_left/pixel_center_integer can be
move out of the shader list loop
v2: blob manages error state internally, just return
true if errors did not occur (Jason)
CID: 1442546
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Just a little higher up in the function we assert that the aspect masks
are actually equal so there's no reason for the weaker check. Also, the
temporary variables were causing compiler warnings in release builds.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
My patch to switch from struct-based MOCS to numeric MOCS accidentally
divided all MOCS entries by 2 in the Vulkan driver.
MOCS on Gen9+ is just an array index into a table. But in the hardware
packets, the index starts at bit 1. So we need to shift it.
Fixes: 0b44644ca6 (genxml: Consistently use a numeric "MOCS" field)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
assert()-based tests make no sense without asserts, so make sure asserts
are compiled in, even if the rest of the code has asserts turned off.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
There was an issue recently caused by the system header being included
by mistake, so let's just get rid of this include path and always
explicitly #include "drm-uapi/FOO.h"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Currently the Intel "anvil" driver races with the generation of genxml
files, while i965 has an explicit dependency. This patch adds the same
dependency to anvil.
Fixes: d1992255bb
("meson: Add build Intel "anv" vulkan driver")
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
This can happen when we record a VkCmdDraw in a secondary buffer that
was created inheriting from the primary buffer, but with the framebuffer
set to NULL in the VkCommandBufferInheritanceInfo.
Vulkan 1.1.81 spec says that "the application must ensure (using scissor
if neccesary) that all rendering is contained in the render area [...]
[which] must be contained within the framebuffer dimesions".
While this should be done by the application, commit 465e5a86 added the
clamp to the framebuffer size, in case of application does not do it.
But this requires to know the framebuffer dimensions.
If we do not have a framebuffer at that moment, the best compromise we
can do is to just apply the scissor as it is, and let the application to
ensure the rendering is contained in the render area.
v2: do not clamp to framebuffer if there isn't a framebuffer
v3 (Jason):
- clamp earlier in the conditional
- clamp to render area if command buffer is primary
v4: clamp also x and y to render area (Jason)
v5: rename used variables (Jason)
Fixes: 465e5a86 ("anv: Clamp scissors to the framebuffer boundary")
CC: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This reverts commit d76e777988.
Let's make this obvious that there is an application issue if it tries
to access an attachment that doesn't exist in the current pass.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: d76e777988 ("anv: Handle VK_ATTACHMENT_UNUSED in colorAttachment")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
It is always false on Gen8+. Also, move the variable definition near
its use.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Transform feedback did not set correct SO_DECL.ComponentMask for
varyings packed in VARYING_SLOT_PSIZ:
gl_Layer - VARYING_SLOT_LAYER in VARYING_SLOT_PSIZ.y
gl_ViewportIndex - VARYING_SLOT_VIEWPORT in VARYING_SLOT_PSIZ.z
gl_PointSize - VARYING_SLOT_PSIZ in VARYING_SLOT_PSIZ.w
Fixes: 36ee2fd61c "anv: Implement the basic form of VK_EXT_transform_feedback"
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
From the Vulkan 1.0.98 spec for vkCmdClearAttachments:
"If the aspectMask member of any element of pAttachments contains
VK_IMAGE_ASPECT_COLOR_BIT, then the colorAttachment member of that
element must either refer to a color attachment which is VK_ATTACHMENT_UNUSED,
or must be a valid color attachment."
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Accessing bo->map and then pool->center_bo_offset without a lock is
racy. One way of avoiding such race condition is to store the bo->map +
center_bo_offset into pool->map at the time the block pool is growing,
which happens within a lock.
v2: Only set pool->map if not using softpin (Jason).
v3: Move things around and only update center_bo_offset if not using
softpin too (Jason).
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reported-by: Ian Romanick <idr@freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109442
Fixes: fc3f588320
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Annoyingly, this requires that we implement integer division on the
command streamer. Fortunately, we're only ever dividing by constants so
we can use the mulh+add+shift trick and it's not as bad as it sounds.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This seems to make the simulator happier. The early return wasn't
really protecting anything and the code that follows will happily
initialize the dummy element to STORE_0 and emit it.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Doesn't save us a great deal of lines but at least they get decoded in
aubinators.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
A little bit of explanation regarding how vkCmdPipelineBarrier()
works.
v2: Avoid referring to data port cache when it's actually sampler
caches (Jason)
Complete explanation for indirect draws (Jason)
v3: s/samplers/sampler/ (Jason)
s/UBOs/data port/
Add documentation for VK_ACCESS_CONDITIONAL_RENDERING_READ_BIT_EXT (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@intel.com> (v1)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v2)
In commit 9a7b319903 ("anv/query: flush render target before
copying results") we tracked all the render target writes to apply a
flushes in the vkCopyQueryResults(). But we can narrow this down to
only when we write a buffer (which is the only input of
vkCopyQueryResults).
v2: Drop newer render target write flags introduce by 1952fd8d2c
("anv: Implement VK_EXT_conditional_rendering for gen 7.5+")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v1)
Conditional rendering affects next functions:
- vkCmdDraw, vkCmdDrawIndexed, vkCmdDrawIndirect, vkCmdDrawIndexedIndirect
- vkCmdDrawIndirectCountKHR, vkCmdDrawIndexedIndirectCountKHR
- vkCmdDispatch, vkCmdDispatchIndirect, vkCmdDispatchBase
- vkCmdClearAttachments
Value from conditional buffer is cached into designated register,
MI_PREDICATE is emitted every time conditional rendering is enabled
and command requires it.
v2: by Jason Ekstrand
- Use vk_find_struct_const instead of manually looping
- Move draw count loading to prepare function
- Zero the top 32-bits of MI_ALU_REG15
v3: Apply pipeline flush before accessing conditional buffer
(The issue was found by Samuel Iglesias)
v4: - Remove support of Haswell due to possible hardware bug
- Made TMP_REG_PREDICATE and TMP_REG_DRAW_COUNT defines to
define registers in one place.
v5: thanks to Jason Ekstrand and Lionel Landwerlin
- Workaround the fact that MI_PREDICATE_RESULT is not
accessible on Haswell by manually calculating
MI_PREDICATE_RESULT and re-emitting MI_PREDICATE
when necessary.
v6: suggested by Lionel Landwerlin
- Instead of calculating the result of predicate once - re-emit
MI_PREDICATE to make it easier to investigate error states.
v7: suggested by Jason
- Make anv_pipe_invalidate_bits_for_access_flag add CS_STALL
if VK_ACCESS_CONDITIONAL_RENDERING_READ_BIT is set.
v8: suggested by Lionel
- Precompute conditional predicate's result to
support secondary command buffers.
- Make prepare_for_draw_count_predicate more readable.
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2: by Jason Ekstrand
- Move out of the draw loop population of registers
which aren't changed in it.
- Remove dependency on ALU registers.
- Clarify usage of PIPE_CONTROL
- Without usage of ALU registers patch works for gen7+
v3: set pending_pipe_bits |= ANV_PIPE_RENDER_TARGET_WRITES
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Add a test that checks that we can use the extra space allocated for
padding while allocating larger anv_states.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
If softpin is supported, create new BOs for the required size and add the
respective BO maps. The other main change of this commit is that
anv_block_pool_map() now returns the map for the BO that the given
offset is part of. So there's no block_pool->map access anymore (when
softpin is used.
v3:
- set fd to -1 on softpin case (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We are not going to use userptr for anv block pool BOs anymore. However,
so far we have been relying on the fact that userptr BOs are snooped on
non-llc platforms. Let's make sure that the block pool BOs are still
snooped, and we can also remove the clflush'ing that we do on all state
buffers.
And since we plan to remove the flushes, set the anv_bo_pool BOs to
cached (snooped on non-LLC platforms) too. For LLC platforms, they are
all cached by default, so this becomes a no-op.
v5:
- Add snooping to anv_bo_pool BOs too (Jason).
- Remove anv_gem_set_domain.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
It's possible that we still have some space left in the block pool, but
we try to allocate a state larger than that state. This means such state
would start somewhere within the range of the old block_pool, and end
after that range, within the range of the new size.
That's fine when we use userptr, since the memory in the block pool is
CPU mapped continuously. However, by the end of this series, we will
have the block_pool split into different BOs, with different CPU
mapping ranges that are not necessarily continuous. So we must avoid
such case of a given state being part of two different BOs in the block
pool.
This commit solves the issue by detecting that we are growing the
block_pool even though we are not at the end of the range. If that
happens, we don't use the space left at the end of the old size, and
consider it as "padding" that can't be used in the allocation. We update
the size requested from the block pool to take the padding into account,
and return the offset after the padding, which happens to be at the
start of the new address range.
Additionally, we return the amount of padding we used, so the caller
knows that this happens and can return that padding back into a list of
free states, that can be reused later. This way we hopefully don't waste
any space, but also avoid having a state split between two different
BOs.
v3:
- Calculate offset + padding at anv_block_pool_alloc_new (Jason).
v4:
- Remove extra "leftover".
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This commit tries to rework the code that split and returns chunks back
to the state pool, while still keeping the same logic.
The original code would get a chunk larger than we need and split it
into pool->block_size. Then it would return all but the first one, and
would split that first one into alloc_size chunks. Then it would keep
the first one (for the allocation), and return the others back to the
pool.
The new anv_state_pool_return_chunk() function will take a chunk (with
the alloc_size part removed), and a small_size hint. It then splits that
chunk into pool->block_size'd chunks, and if there's some space still
left, split that into small_size chunks. small_size in this case is the
same size as alloc_size.
The idea is to keep the same logic, but make it in a way we can reuse it
to return other chunks to the pool when we are growing the buffer.
v2:
- Include Jason's suggestions to the algorithm that returns chunks.
- Update comments.
v3:
- Disallow returning 0 blocks (Jason).
- fix min_size in the loop (Jason).
- remove temporary variables (Jason)
v4:
- return_chunk() should never return blocks larger than
pool->block_size.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
