Vulkan spec doesn't specify that VK_REMAINING_ARRAY_LAYERS is allowed
in the passed VkClearRect struct.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We can write to the same output but in different components, like
in this example:
layout(location = 0, component = 0) out ivec2 dEQP_FragColor_0;
layout(location = 0, component = 2) out ivec2 dEQP_FragColor_1;
Therefore, they are not two different outputs but only one.
Fixes:
dEQP-VK.glsl.440.linkage.varying.component.frag_out.*
v3:
- Remove FRAG_RESULT_MAX.
- Add const and use sizeof (Ian).
- Do three-pass to set properly the locations of fragment
outputs when having arrays (Jason).
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Push constants on Intel hardware are significantly more performant than
pull constants. Since most Vulkan applications don't actively use push
constants on Vulkan or at least don't use it heavily, we're pulling way
more than we should be. By enabling pushing chunks of UBOs we can get
rid of a lot of those pulls.
On my SKL GT4e, this improves the performance of Dota 2 and Talos by
around 2.5% and improves Aztec Ruins by around 2%.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Push constants work in terms of 32-byte chunks so if we want to be able
to push UBOs, every thing needs to be 32-byte aligned. Currently, we
only require 16-byte which is too small.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In order to do this we have to modify push constant set up to handle
ranges. We also have to tweak the way we handle dirty bits a bit so
that we re-push whenever a descriptor set changes.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
There are several places where we look up opcodes in an array of stages.
Assert that the we don't end up going out-of-bounds.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We want to call brw_nir_analyze_ubo_ranges immedately after
anv_nir_apply_pipeline_layout and it badly wants constants. We could
run an optimization step and let constant folding do it but that's way
more expensive than needed. It's really easy to just handle constants
in apply_pipeline_layout.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The testing for this extension is currently very poor. The CTS tests
only test accessing UBOs and SSBOs at dynamic offsets so none of our
constant-offset paths get triggered at all. Also, there's an assertion
in our handling of nir_intrinsic_load_uniform that offset % 4 == 0 which
is never triggered indicating that nothing every gets loaded from an
offset which is not a dword. Both push constants and the constant
offset pull paths are complex enough, we really don't want to ship
without tests. We'll turn the extension back on once we have decent
tests.
The handle type in the case statement is supposed to be VK_EXTERNAL_-
MEMORY_HANDLE_TYPE_DMA_BUF_BIT_EXT.
Fixes: ab18e8e59b ("anv: Implement VK_EXT_external_memory_dma_buf")
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Enables SPV_KHR_16bit_storage on gen 8+.
VK_KHR_16bit_storage is enabled for SSBO/UBO using the
VK_KHR_get_physical_device_properties2 functionality to expose
if the extension is supported or not.
v2: update due rebase against master (Alejandro)
v3: (Jason Ekstrand)
- Move this patch up in VK_KHR_16bit_storage series enabling only
storageBuffer16BitAccess and uniformAndStorageBuffer16BitAccess.
- Only expose VK_KHR_16bit_storage on Gen8+
v4: (Jason Ekstrand)
- Squash enable SPV_KHR_16bit_storage into VK_KHR_16bit_storage
enablement for SSBO/UBO.
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Signed-off-by: Eduardo Lima Mitev <elima@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Not to be confused with variablePointersStorageBuffer which is the
subset of VK_KHR_variable_pointers required to enable the extension.
This means we now have "full" support for variable pointers.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
The reference value in gen_device_info isn't going to be acurate on
Gen10+. We should query it from the kernel, which reads a couple of
register to compute the actual value.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Now that we have anv_device_init/finish functions, there's no reason to
have the individual driver do any more work than that.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
This drops the unneeded callbacks struct as well as the queue_get_family
callback we were using before we'd pulled QueuePresent inside.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
This lets us move wsi_interface to wsi_common_private.h
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Unfortunately, due to the fact that AcquireNextImage does not take a
queue, the ANV trick for triggering the fence won't work in general. We
leave dealing with the fence up to the caller for now.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
v2 (Jason Ekstrand):
- Rebase
- Alter the names of the helpers to better match the vulkan entrypoints
- Use the helpers in anv
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
This moves bits out of all four corners (anv, radv, x11, wayland) and
into the wsi common code. We also switch to using an outarray to ensure
we get our return code right.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Now that we're using the same common code as radv, we get prime support
for free. Just enable it.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
This uses the mock extension created in a previous commit to tell the
driver that the image it's just been asked to create is, in fact, a
window system image with whatever assumptions that implies. There was a
lot of redundant code between the two drivers to do basically exactly
the same thing.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
This lets us set the BO tiling when we allocate the memory. This is
required for GL to work properly.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
At the moment, this is always initialized to DRM_FORMAT_MOD_INVALID.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
This is a modified version of the patch originally sent by Chad Versace.
The primary difference is that this version claims that OPQAUE_FD and
DMA_BUF are compatible handle types.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
This gives the opportunity to collect some function pointers if we'd
like which will be very useful in future.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
This is used to hold information about the allocated image, rather than
an ever-growing function argument list.
v2 (Jason Ekstrand):
- Rename wsi_image_base to wsi_image
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
This just seems cleaner, and we may expand this in future.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This is a bit more general and lets us pass additional options into the
spirv_to_nir pass beyond what capabilities we support.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
While we're at it, we break it into two nicely named functions.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
When the kernel support flagging our BO, let's mark batch &
instruction BOs for capture so then can be included in the error
state.
v2: Only add EXEC_CAPTURE if supported (Kristian)
v3: Fix operator precedence issue (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will allow to set the flags on any anv_bo created/filled from a
state pool or block pool later.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Otherwise, if the image is not bound to the start of the buffer, we're
going to be reading and writing its fast clear state in the wrong spot.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
We already have this workaround in OpenGL driver.
See Mesa commit 3cf4fe2219.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: Nanley Chery <nanley.g.chery@intel.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
This makes our MOCS settings significantly more flexible.
Cc: "17.3" <mesa-stable@lists.freedesktop.org>
Tested-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
I tested this in a setup where the builddir was outside of the srcdir.
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Its helper function, anv_surface_get_subresource_layout(), was not very
helpful. So fold it into the main function.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
