Wrapping jump instructions that are located inside ifs can break SSA
invariants because the else block no longer dominates the merge block.
Repair the SSA to make the validator happy again.
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37957>
Most of the time, we can infer the type to append in
util_dynarray_append using __typeof__, which is standardized in C23 and
support in Jesse's MSMSVCV. This patch drops the type argument most of
the time, making util_dynarray a little more ergonomic to use.
This is done in four steps.
First, rename util_dynarray_append -> util_dynarray_append_typed
bash -c "find . -type f -exec sed -i -e 's/util_dynarray_append(/util_dynarray_append_typed(/g' \{} \;"
Then, add a new append that infers the type. This is much more ergonomic
for what you want most of the time.
Next, use type-inferred append as much as possible, via Coccinelle
patch (plus manual fixup):
@@
expression dynarray, element;
type type;
@@
-util_dynarray_append_typed(dynarray, type, element);
+util_dynarray_append(dynarray, element);
Finally, hand fixup cases that Coccinelle missed or incorrectly
translated, of which there were several because we can't used the
untyped append with a literal (since the sizeof won't do what you want).
All four steps are squashed to produce a single patch changing every
util_dynarray_append call site in tree to either drop a type parameter
(if possible) or insert a _typed suffix (if we can't infer). As such,
the final patch is best reviewed by hand even though it was
tool-assisted.
No Long Linguine Meals were involved in the making of this patch.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@intel.com>
Acked-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38038>
In !35844, there was some discussion about allowing 64-bit bcsel that
would be lowered in the driver. One challenge there would be if a 64-bit
bcsel was transformed into integer min or max by an algebraic
optimization. I believe these were the only algebraic patterns that
could create new integer min or max that would not be immediately
constant folded.
There were no shader-db or fossil-db changes on any Intel platform.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38033>
Introduces an opt pass that attempts to optimize
load_barycentric_at_{sample,offset} with simpler load_barycentric_*
equivalents where possible, and optionally lowers
load_barycentric_at_sample to load_barycentric_at_offset with a position
derived from the sample ID instead.
Signed-off-by: Simon Perretta <simon.perretta@imgtec.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37658>
nir_lower_compute_system_values will attempt to lower
load_workgroup_size unless workgroup_size_variable is set. For precomp
shaders, the workgroup size is set statically for each entrypoint by
nir_precompiled_build_variant. Because we call
lower_compute_system_values early, it sets the workgroup size to zero.
Temporarily setting workgroup_size_variable while we are still
processing all the entrypoints together inhibits this.
Signed-off-by: Olivia Lee <olivia.lee@collabora.com>
Fixes: 20970bcd96 ("panfrost: Add base of OpenCL C infrastructure")
Reviewed-by: Eric R. Smith <eric.smith@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37799>
Not sure about creating u64vec16 loads, but creating unaligned loads is
possible with opt_if_rewrite_uniform_uses.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Georg Lehmann <dadschoorse@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37953>
Those are normally uniform always, but for the purpose of fused
threads handling, we need to check their sources.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: ca1533cd03 ("nir/divergence: add a new mode to cover fused threads on Intel HW")
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37929>
df1876f615 ("nir: Mark negative re-distribution on fadd as imprecise")
fixed the fadd case by marking it as imprecise. This commit fixes the
ffma case for the same reason.
However, "imprecise" isn't necessary and nowadays we have "nsz" which is
more accurate here. Use that for both fadd and ffma.
Signed-off-by: Job Noorman <jnoorman@igalia.com>
Fixes: 62795475e8 ("nir/algebraic: Distribute source modifiers into instructions")
Reviewed-by: Georg Lehmann <dadschoorse@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37930>
Introduce new NIR intrinsics to handle getting a "sink" read-only
address and another intrinsic to handle conversion of address to
read-write (allowing implementation to replace the "sink" read-only with
another address like required for Asahi)
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37914>
This is used by the geometry lowering that we are going to move to
common code.
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37914>
This was something that came up in the slop MR. Not sure it's actually a
good idea or not but kind of curious what people think, given we have a
sound tool (Coccinelle) to do the transform. Saves a redundant branch
but means extra noninlined function calls.. likely no actual perf impact
but saves some code.
Via Coccinelle patches:
@@
expression ptr;
@@
-if (ptr) {
-free(ptr);
-}
+free(ptr);
@@
expression ptr;
@@
-if (ptr) {
-FREE(ptr);
-}
+FREE(ptr);
@@
expression ptr;
@@
-if (ptr) {
-ralloc_free(ptr);
-}
+ralloc_free(ptr);
@@
expression ptr;
@@
-if (ptr != NULL) {
-free(ptr);
-}
-
+free(ptr);
@@
expression ptr;
@@
-if (ptr != NULL) {
-FREE(ptr);
-}
-
+FREE(ptr);
@@
expression ptr;
@@
-if (ptr != NULL) {
-ralloc_free(ptr);
-}
-
+ralloc_free(ptr);
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com> [v3d]
Reviewed-by: Yiwei Zhang <zzyiwei@chromium.org> [venus]
Reviewed-by: Frank Binns <frank.binns@imgtec.com> [powervr]
Reviewed-by: Janne Grunau <j@jannau.net> [asahi]
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com> [radv]
Reviewed-by: Job Noorman <jnoorman@igalia.com> [ir3]
Acked-by: Marek Olšák <maraeo@gmail.com>
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Job Noorman <jnoorman@igalia.com>
Acked-by: Yonggang Luo <luoyonggang@gmail.com>
Acked-by: Christian Gmeiner <cgmeiner@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37892>
Sample positions aren't uniform when the sample id is divergent.
This was a regression when we started lowering fragment shader
barycentrics in NIR.
Fixes: 7f444fc72c ("nir: add nir_intrinsic_load_sample_positions_amd")
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37843>
This is more in line with similar opcodes like umul_32x16.
Also change its const expr: the masking based on bit size was
unnecessary as it is only defined for 32 bits. Use simple casts instead.
Signed-off-by: Job Noorman <jnoorman@igalia.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37863>
Intel platforms will soon implement both bfi and bitfield_select. bfi is
more efficient for bitfield_insert.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Georg Lehmann <dadschoorse@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37186>
The eliminated SENDs are from a single app that has a bunch of
fragment shaders with a sequence like:
con 32 %495 = fmul! %203.i, %1 (0.000000)
con 32 %496 = ffma! %203.j, %1 (0.000000), %495
con 32 %497 = ffma! %203.k, %1 (0.000000), %496
con 32 %498 = ffma! %203.l, %1 (0.000000), %497
con 32 %499 = @load_reloc_const_intel (param_idx=1, base=0)
con 32 %500 = @load_reloc_const_intel (param_idx=0, base=0)
con 32 %501 = f2u32 %498
con 32 %502 = umin %501, %172 (0x4)
con 32 %503 = ishl %502, %172 (0x4)
con 32 %504 = load_const (0x00000040 = 64)
con 32 %505 = umin %503, %504 (0x40)
con 32 %506 = iadd %500, %505
The `f2u` is replaced with 0, and that makes the `ffma` dot-product
sequence be unused. Since it is unused, most of the preceeding block
gets eliminated. A lot of instructions after the `f2u` are also
eliminated by other algebraic optimizations. Most importantly, %203 is
the result of a `load_ubo_uniform_block_intel` that is eliminated.
No shader-db changes on any Intel platform.
fossil-db:
All Intel platforms had similar results. (Lunar Lake shown)
Totals:
Instrs: 919895603 -> 919804051 (-0.01%); split: -0.01%, +0.00%
Send messages: 40892036 -> 40887569 (-0.01%)
Cycle count: 99176770712 -> 99174971806 (-0.00%); split: -0.00%, +0.00%
Max live registers: 190030365 -> 190030367 (+0.00%)
Max dispatch width: 47415040 -> 47415024 (-0.00%)
Non SSA regs after NIR: 228872538 -> 228863608 (-0.00%); split: -0.00%, +0.00%
Totals from 2234 (0.11% of 1955134) affected shaders:
Instrs: 1989743 -> 1898191 (-4.60%); split: -4.60%, +0.00%
Send messages: 44179 -> 39712 (-10.11%)
Cycle count: 25416114 -> 23617208 (-7.08%); split: -7.08%, +0.00%
Max live registers: 367357 -> 367359 (+0.00%)
Max dispatch width: 39184 -> 39168 (-0.04%)
Non SSA regs after NIR: 471173 -> 462243 (-1.90%); split: -1.90%, +0.00%
Reviewed-by: Georg Lehmann <dadschoorse@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37186>
If the source -1.0 < x < 0.0, simply removing the ftrun will introduce
undefined behavior. By chance of how at least Intel and NVIDIA GPUs
implement f2u, this has Just Worked.
No shader-db changes on any Intel platform.
fossil-db:
Lunar Lake
Totals:
Instrs: 913264354 -> 913264366 (+0.00%)
Cycle count: 104953995530 -> 104953996854 (+0.00%)
Max live registers: 189266026 -> 189266058 (+0.00%)
Non SSA regs after NIR: 227779417 -> 227779369 (-0.00%)
Totals from 24 (0.00% of 1984794) affected shaders:
Instrs: 4669 -> 4681 (+0.26%)
Cycle count: 50610 -> 51934 (+2.62%)
Max live registers: 1222 -> 1254 (+2.62%)
Non SSA regs after NIR: 1174 -> 1126 (-4.09%)
Meteor Lake, DG2, Tiger Lake, and Ice Lake had similar results. (Meteor Lake shown)
Totals:
Instrs: 1001288026 -> 1001288038 (+0.00%)
Cycle count: 92813392671 -> 92813392791 (+0.00%)
Max live registers: 121935383 -> 121935399 (+0.00%)
Max dispatch width: 19949928 -> 19949912 (-0.00%)
Totals from 2 (0.00% of 2284670) affected shaders:
Instrs: 1380 -> 1392 (+0.87%)
Cycle count: 18940 -> 19060 (+0.63%)
Max live registers: 136 -> 152 (+11.76%)
Max dispatch width: 32 -> 16 (-50.00%)
No fossil-db changes on Skylake.
Suggested-by: Georg Lehmann
Reviewed-by: Georg Lehmann <dadschoorse@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37186>
There are no shader-db changes on ELK platforms because those platforms
don't support 8- or 16-bit integer types.
v2: Restrict patterns generated such that the integer limits are exactly
representable in the specified floating point format. With the exception
of the value 0, this requires that float_sz > int_sz. This had no impact
on shader-db or fossil-db on any Intel platform. Noticed by Georg.
v3: Add a missing is_a_number.
shader-db:
All Intel platforms had similar results. (Lunar Lake shown)
total cycles in shared programs: 889936056 -> 889934082 (<.01%)
cycles in affected programs: 65806 -> 63832 (-3.00%)
helped: 2 / HURT: 0
fossil-db:
Lunar Lake
Totals:
Instrs: 233284796 -> 233282917 (-0.00%); split: -0.00%, +0.00%
Cycle count: 32756399804 -> 32754972188 (-0.00%); split: -0.01%, +0.00%
Spill count: 519861 -> 519813 (-0.01%)
Fill count: 663650 -> 663626 (-0.00%); split: -0.01%, +0.01%
Max live registers: 71738626 -> 71738696 (+0.00%)
Non SSA regs after NIR: 67837902 -> 67837648 (-0.00%)
Totals from 1236 (0.16% of 790723) affected shaders:
Instrs: 2134504 -> 2132625 (-0.09%); split: -0.09%, +0.01%
Cycle count: 604922278 -> 603494662 (-0.24%); split: -0.48%, +0.25%
Spill count: 16509 -> 16461 (-0.29%)
Fill count: 32760 -> 32736 (-0.07%); split: -0.22%, +0.15%
Max live registers: 250112 -> 250182 (+0.03%)
Non SSA regs after NIR: 302368 -> 302114 (-0.08%)
Meteor Lake, DG2, and Tiger Lake had similar results. (Meteor Lake shown)
Totals:
Instrs: 264095370 -> 264094056 (-0.00%); split: -0.00%, +0.00%
Cycle count: 26554146277 -> 26553027268 (-0.00%); split: -0.01%, +0.01%
Spill count: 530603 -> 530615 (+0.00%)
Fill count: 613231 -> 613273 (+0.01%)
Max live registers: 46559041 -> 46559087 (+0.00%)
Totals from 1237 (0.14% of 905547) affected shaders:
Instrs: 2262517 -> 2261203 (-0.06%); split: -0.07%, +0.01%
Cycle count: 518219799 -> 517100790 (-0.22%); split: -0.59%, +0.37%
Spill count: 17518 -> 17530 (+0.07%)
Fill count: 32273 -> 32315 (+0.13%)
Max live registers: 128360 -> 128406 (+0.04%)
Ice Lake and Skylake had similar results. (Ice Lake shown)
Totals:
Instrs: 269849640 -> 269848198 (-0.00%); split: -0.00%, +0.00%
Cycle count: 26718329643 -> 26718289020 (-0.00%); split: -0.00%, +0.00%
Max live registers: 46878430 -> 46878462 (+0.00%)
Totals from 1233 (0.14% of 905427) affected shaders:
Instrs: 2324225 -> 2322783 (-0.06%); split: -0.06%, +0.00%
Cycle count: 531467501 -> 531426878 (-0.01%); split: -0.11%, +0.10%
Max live registers: 130782 -> 130814 (+0.02%)
Reviewed-by: Georg Lehmann <dadschoorse@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37186>
v2: Add a comment around has_f2[ui]_sat explaining which opcodes it
enables. Suggested by Georg. Cast u_uintN_max and friends to double in
nir_opcodes.py. This ensures that an exact conversion is made.
Eliminate duplicate conversions from half float to double. Both noticed
by Georg.
v3: Apply "NaN should be zero" fix suggested by Georg.
Co-authored-by: Georg Lehmann <dadschoorse@gmail.com>
Reviewed-by: Georg Lehmann <dadschoorse@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37186>
The Intel Gfx12.x generation of GPU has an architecture feature called
EU fusion in which 2 subgroups run lock step. A typical case where
this happens is a compute shader with 1x1x1 local workgroup size and a
dispatch command of 2x1x1. In that case 2 threads will be run in lock
step for each of the workgroup.
This has been the sources of some troubles in the backend because one
subgroup can run with all lanes disabled, requiring care for SEND
messages using the NoMask flag (execution regardless of the lane mask).
We found out that other things are happening when 2 subgroups run
together :
- the HW will use the surface/sampler handle from only one subgroup
- the HW will use the sampler header from only one subgroup
So one of the fused subgroup can access the wrong surface/sampler if
the value is different between the 2 subgroups and that can happen
even with subgroup uniform values.
Fortunately we can flag SEND instructions to disable the fusion
behavior (most likely at a performance cost).
This change introduce a new divergence mode that tries to compute
things divergent between subgroups so that we can flag instructions
accordingly.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37394>
nir_recompute_io_bases will modify i/o intrinsics, which is not the
expected behaviour when the keep_intrinsics flag is set.
Fixes: 83aecc8f3f ("mesa/st, nir: commonize unlower_io_to_vars pass")
Signed-off-by: Simon Perretta <simon.perretta@imgtec.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37725>
