Patch implements common bits for EXT_surface_SMPTE2086_metadata
and EXT_surface_CTA861_3_metadata extensions by adding new required
attributes and eglQuerySurface + eglSurfaceAttrib changes.
Currently none of the drivers are utilizing this data but this patch
is enabler in getting there.
v2: don't enable extension globally, should be only enabled by
EGL drivers that can transfer metadata to the window system (Jason)
use EGLint instead of uint16_t (Eric)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Supresses a maybe-uninitialized warning with GCC 8.
Note: image_index should always be initialised due to the result check,
but the compiler doesn't see that.
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Only used, when asserts are enabled.
Fixes an unused-variable warning with gcc-8:
../../../src/compiler/nir/nir_opt_if.c: In function 'opt_peel_loop_initial_if':
../../../src/compiler/nir/nir_opt_if.c:109:15: warning: unused variable 'prev_block' [-Wunused-variable]
nir_block *prev_block =
^~~~~~~~~~
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Only used, when asserts are enabled.
Fixes an unused-variable warning with gcc-8:
../../../src/util/half_float.c: In function '_mesa_half_to_unorm8':
../../../src/util/half_float.c:189:14: warning: unused variable 's' [-Wunused-variable]
const int s = (val >> 15) & 0x1;
^
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
For some reason wine will sometimes give us a windows style path
for an application. For example when running the 64bit version
of Rage wine gives a Unix style path, but when running the 32bit
version is gives a windows style path.
If we detect no '/' in the path at all it should be safe to
assume we have a wine application and instead look for a '\'.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
The innermost check was added to stop us from unrolling multiple
loops in a single pass, and to stop outer loops from unrolling.
When we successfully unroll a loop we need to run the analysis
pass again before deciding if we want to go ahead an unroll a
second loop.
However the logic was flawed because it never tried to unroll any
nested loops other than the first innermost loop it found.
If this innermost loop is not unrolled we end up skipping all
other nested loops.
This unrolls a loop in a Deus Ex: MD shader on ultra settings and
also unrolls a loop in a shader from the game Prey when running
on DXVK.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
At the moment, depending on pipe transfer flags, the dumb
buffer map address can end up at either kms_sw_dt->ro_mapped
or kms_sw_dt->mapped.
When it's time to unmap the dumb buffer, both locations get unmapped,
even though one is probably initialized to 0.
That leads to the code segment getting unmapped at runtime and
crashes when trying to call into unrelated code.
This commit addresses the problem by using MAP_FAILED instead of
NULL for ro_mapped and mapped when the dumb buffer is unmapped,
and only unmapping mapped addresses at unmap time.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107098
Signed-off-by: Ray Strode <rstrode@redhat.com>
Fixes: d891f28df9 ("gallium/winsys/kms: Fix possible leak in map/unmap.")
Cc: Lepton Wu <lepton@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
drirc implementation of MESA_LOADER_DRIVER_OVERRIDE which can be
used to override dri driver to load.
Usage:
override dri driver for device with spec kernel driver name:
<device kernel_driver="kernel_driver_name">
<option name="dri_driver" value="new_dri_driver" />
</device>
or
<device driver="loader" kernel_driver="kernel_driver_name">
<option name="dri_driver" value="new_dri_driver" />
</device>
v2:
add kernel_driver device attribute to specify kernel
driver name instead of reuse driver attribute
v3:
seperate loader_get_kernel_driver_name into another patch
seperate add kernel_driver attribute into another patch
Suggested-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
[v4 Emil: add HAVE_LIBDRM guard around __driConfigOptionsLoader and
loader_get_dri_config_driver]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
This attribute can be used by loader to apply different
option to device use specific kernel driver.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This function can be shared by the following kernel_driver
drirc patch.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
${sysconfdir} is for store admin config files, so move
this mesa default config file to ${datadir}/drirc.d.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Driver and application can put their drirc files in
${datadir}/drirc.d/ with name xxx.conf. Config files
will be read and applied in file name alphabetic order.
So there are three places for drirc listed in order:
1. /usr/share/drirc.d/
2. /etc/drirc
3. ~/.drirc
v4:
fix meson build
v3:
1. seperate driParseConfigFiles refine into another patch
2. fix entries[i] mem leak
v2:
drop /etc/drirc.d
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Also prepare for the usage of following parseConfigDir patch.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
[Emil: add #include <limits.h>]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
This allows us to use the link-optimized shader for determining binding
table layouts and, more importantly, URB layouts. For apps running on
DXVK, this is extremely important as DXVK likes to declare max-size
inputs and outputs and this lets is massively shrink our URB space
requirements.
VkPipeline-db results (Batman pipelines only) on KBL:
total instructions in shared programs: 820403 -> 790008 (-3.70%)
instructions in affected programs: 273759 -> 243364 (-11.10%)
helped: 622
HURT: 42
total spills in shared programs: 8449 -> 5212 (-38.31%)
spills in affected programs: 3427 -> 190 (-94.46%)
helped: 607
HURT: 2
total fills in shared programs: 11638 -> 6067 (-47.87%)
fills in affected programs: 5879 -> 308 (-94.76%)
helped: 606
HURT: 3
Looking at shaders by hand, it makes the URB between TCS and TES go from
containing 32 per-vertex varyings per tessellation shader pair to a more
reasonable 8-12. For a 3-vertex patch, that's at least half the URB
space no matter how big the patch section is.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
We want these to be set as close to the final compile as possible so
that they are guaranteed to happen after nir_shader_gather_info is
called. The next commit is going to move nir_shader_gather_info to
after the linking step which makes this necessary.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This commit makes three changes. One is to only walk the descriptors once
and set bind map sizes at the same time as filling out the entries. The
second is to make the pass additive so that we can put stuff in the bind
map before applying the pipeline layout. Third, we switch to using
designated initializers.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Because lower_ycbcr gets called before apply_pipeline_layout, the
indices are all logical and the binding layout HW size is actually too
big for the bounds check. We should just use the regular logical array
size instead.
Fixes: f3e91e78a3 "anv: add nir lowering pass for ycbcr textures"
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
In commit bd27203f4d we changed this to
open in binary mode, to then explicitly decode the lines with the right
encoding.
Unfortunately, that broke the build on Windows, where the template file
can have '\r\n' as line terminators: opening in binary mode would keep
those terminators and break the regexp.
We need to go back to text mode, where the "universal newlines" mode
takes care of this.
However, to fix the initial issue, let's specify the encoding explicitly
when opening the file, and make sure it is open in text mode, so we only
get unicode strings.
Reviewed-by: Jose Fonseca <jfonseca@vmware>
When the number of unique BO is 0, we optimize the list creation
by copying all buffers of the current CS directly into it. But
this is only valid if the CS doesn't have virtual buffers,
otherwise they are not added and hw might report VM faults.
This fixes VM faults with:
dEQP-VK.sparse_resources.image_sparse_binding.2d.rgba8ui.1024_128_1
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This adds a freedreno backend for the a6xx generation GPUs, which at
the time of this commit is about 98% GLES2 conformant. Much remains to
be done - both performance work and feature work towards more recent
GLES versions, but this is a good start.
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
v2: - Use distutils to do the version checking
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107565
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
less than 2.7 is not supported.
v2: - Remove check for python >= 2.0, since we've already enforced 2.7
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This handy helper is nice for OSes that are not linux or BSD like (mac
and windows) as it knows how to find python3 in odd places.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
It's what autotools has required for a long time.
v3: - Use distutils.version.StrictVersion instead of comparing strings
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Suggested-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
`device` is used 2 lines below, even visible in the diff context printed.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
