We've been setting it in gen7 forever but never in gen8; best to make it
consistent. This hasn't caused any problems yet because we don't advertise
support for statistics queries yet.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The multisample rasterization mode is computed based on this field,
3DSTATE_RASTER::DXMultisampleRasterizationMode (only for forced
multisampling), 3DSTATE_RASTER::APIMode, and the number of samples. There
are two tables in the SKL PRM that describe how the final multisample mode
is calculated: "Windower (WM) Stage >> Multisampling >> Multisample
ModeState >> Table 1" and the formula for "SF_INT::Multisample
Rasterization Mode".
The "DX Multisample Rasterization Enable" bit changes whether multisample
mode is set to OFF_PIXEL or ON_PATTERN in the samples > 1 case. In the
samples == 1 case, the bit has no effect. Since Vulkan has no concept of
disabling multisampling for samples > 1, we can just set the bit.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
According to the IVB PRM Vol2 P1, this bit must be set if a pixel shader
contains a discard instruction.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97207
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
See commit b0629e6894, where we discovered
that the SOL stage's "Rendering Disable" feature is a lot faster at
throwing away all geometry than the clipper's "reject all" mode.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We should use the persample_dispatch variable in prog_data.
Fixes all (~60) the DEQP sample shading tests. Many tests exited with
VK_ERROR_OUT_OF_DEVICE_MEMORY without this patch.
V2: Use the shader key bits set in brw_compile_fs (Jason)
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This should get texture gather working on gen8+ and mostly working on gen7.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-dev@lists.freedesktop.org>
Gen7/7.5 call it "Rendering Disable" while Gen8/9 prefix it with "API".
Pick one for consistency, and so we can share code between generations.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The bulk of this is the same. There are just a couple fields that only
exist on one generation or another, and we can easily handle those with
an #ifdef.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We set the cull mode, but forgot the enable bit. Gen8 uses this.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The Gen7/7.5 clip code used APIMODE_OGL, while the Gen8+ clip code used
APIMODE_D3D. The meaning hasn't changed, so one of these must be wrong.
It appears that the hardware documentation is completely wrong. It
claims that the "API Mode" bit means:
0h APIMODE_OGL NEAR_VP boundary == 0.0 (NDC)
1h APIMODE_D3D NEAR_VP boundary == -1.0 (NDC)
However, DirectX typically uses 0.0 for the near plane, while unextended
OpenGL uses -1.0. i965's gen6_clip_state.c uses APIMODE_D3D for the
GL_ZERO_TO_ONE case, so I believe the meanings are backwards from what
the documentation says.
Section 23.2 ("Primitive Clipping") of the Vulkan 1.0.21 specification
contains the following equations:
-w_c <= x_c <= w_c
-w_c <= y_c <= w_c
0 <= z_c <= w_c
This means that Vulkan follows D3D semantics.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Gen6-7.5 use CLIPMODE_REJECT_ALL, while Gen8+ just used REJECT_ALL.
Being consistent will let me unify code, and I prefer having the prefix.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Likewise, rename the enum type to glsl_interp_mode.
Beyond the GLSL front-end, talking about "interpolation modes" seems
more natural than "interpolation qualifiers" - in the IR, we're removed
from how exactly the source language specifies how to interpolate an
input. Also, SPIR-V calls these "decorations" rather than "qualifiers".
Generated by:
$ find . -regextype egrep -regex '.*\.(c|cpp|h)' -type f -exec sed -i \
-e 's/INTERP_QUALIFIER_/INTERP_MODE_/g' \
-e 's/glsl_interp_qualifier/glsl_interp_mode/g' {} \;
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Dave Airlie <airlied@redhat.com>
THe offset type has special implications that it's intended to be some form
of aligned memory address. These assumptions allow it to handle the case
where there is some alignment requirement on the offset and the bottom bits
are used for other things. However, the offsets in the surface state field
are really just unsigned integers.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chad.versace@intel.com>
The field is in multiples of 4 like regular QPitch.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>
The old calculation, which used view->offset, encorporated buffer->offset
into the size calculation where it doesn't belong. This meant that, if
buffer->offset > buffer->size, you would always get a negative size. This
fixes 170 dEQP-VK.renderpass.attachment.* Vulkan CTS tests on Haswell.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
We can totally do it, we were just only setting up one BLEND_STATE and, now
that the code is unified with gen8, we should be handling it correctly.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
This renames BLEND_STATE to BLEND_STATE_ENTRY and adds an new struct
BLEND_STATE which is just an array of 8 BLEND_STATE_ENTRYs. This will make
it much easier to write gen-agnostic blend handling code.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
This reverts commit 091f1da902 .
Although a user may specify a specfic tiling bit, ISL should still
prevent incompatible tiling/surface combinations.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>
In the next patch, ISL will unconditionally perform verification of a
surface's tiling and usage. Since it will require that w-tiled images
be stencil buffers, create a stencil surface to copy from a
w-tiled/stencil surface.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
If an internal user creates an image with Vulkan tiling VK_IMAGE_TILING_OPTIMAL
and an ISL tiling that isn't set, ISL will fail to create the image as
anv_image_create_info::isl_tiling_flags will be an invalid value.
Correct this by making anv_image_create_info::isl_tiling_flags an opt-in,
filtering bitmask, that allows the caller to specify which ISL tilings are
acceptable, but not contradictory to the Vulkan tiling.
Opt-out of filtering for vkCreateImage.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Set limits that are consistent with ISL's assertions in
isl_genX(buffer_fill_state_s)() and Anvil's format-DescriptorType
mapping in anv_isl_format_for_descriptor_type().
Fixes the following new crucible tests:
* stress.limits.buffer-update.range.uniform
* stress.limits.buffer-update.range.storage
These tests are in this patch: https://patchwork.freedesktop.org/patch/98726/
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
See inline PRM reference.
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
A ternary is clearer because the range member is assigned one of two values
dependant on one condition.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This became unused due to commit 612e35b2c6 .
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Section 13.2.3. of the Vulkan spec requires that implementations be able to
bind sparsely-defined Descriptor Sets without any errors or exceptions.
When binding a descriptor set that contains a dynamic buffer binding/descriptor,
the driver attempts to dereference the descriptor's buffer_view field if it is
non-NULL. It currently segfaults on undefined descriptors as this field is never
zero-initialized. Zero undefined descriptors to avoid segfaulting. This
solution was suggested by Jason Ekstrand.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96850
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
