We need to set up a handler for the global_remove event that gets sent
out when a global gets removed. Without the handler we end up calling
a NULL pointer.
https://bugs.freedesktop.org/show_bug.cgi?id=65910
NOTE: This is a candidate for the stable branches.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
When rendering to a texture with BaseLevel set, the miptree may be laid
out such that BaseLevel is in level 0 of the miptree (to avoid wasting
memory on unused levels between 0 and BaseLevel-1). In that case, we
have to shift our render target's level down to the appropriate level of
the smaller miptree.
The WebGL test in combination with a meta code relating to
glGenerateMipmap also triggered a similar failure scenario.
This GPU hang regression was introduced by c754f7a8.
Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=65324
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
This reverts commit 41966fdb3b.
While it's a lot cleaner it causes regressions because
the draw interface is always called from the draw functions
of the drivers (because the buffers need to be mapped) which
means that the stream output buffers endup being cleared on
every draw rather than on setting.
Signed-off-by: Zack Rusin <zackr@vmware.com>
honor render_condition for clear_render_target and clear_depth_stencil.
Also add minimal support for occlusion predicate, though it can't be active
at the same time as an occlusion query yet.
While here also switchify some large if-else (actually just mutually
exclusive if-if-if...) constructs.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
For conditional rendering this makes it possible to skip rendering
if either the predicate is true or false, as supported by d3d10
(in fact previously it was sort of implied skip rendering if predicate
is false for occlusion predicate, and true for so_overflow predicate).
There's no cap bit for this as presumably all drivers could do it trivially
(but this patch does not implement it for the drivers using true
hw predicates, nvxx, r600, radeonsi, no change is expected for OpenGL
functionality).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Add ilo_gpe_init_zs_surface() to construct
3DSTATE_DEPTH_BUFFER
3DSTATE_STENCIL_BUFFER
3DSTATE_HIER_DEPTH_BUFFER
at surface creation time. This allows fast state emission in draw_vbo().
This gets us support for blitting to attachment types other than
textures.
v2: fix up comments from review by Kenneth.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Paul Berry <stereotype441@gmail.com>
Now any caller (such as glCopyPixels()) can benefit from it, and it only
changes the correct subset of the destination instead of a whole teximage.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Apparently we don't have any piglit tests for this, because it would have
assertion failed in a debug build, or just rendered wrong in a non-debug
build if the destination wasn't covering whole tiles.
v2: Use the new macros.
Reviewed-by: Paul Berry <stereotype441@gmail.com> (v1)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
We're going to add more BCS_SWCTRL setup instances soon, and you have to
be careful to have the set and restore atomic with the rendering that's
done, so that our state doesn't leak out to other rendering processes.
v2: Rewrite the patch to have batch begin/advance macros so that magic
numbers don't get sprinkled around (and so you don't mix up your
do-I-need-to-reset vs what-do-I-reset-to logic, which I nearly did in
the next patch when first writing it)
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Intel had brokenness here, and I'd like to continue moving Mesa toward
hiding 1D_ARRAY's ridiculousness inside of the core, like we did with
MapTextureImage. Fixes copyteximage 1D_ARRAY on intel.
There's still an impedance mismatch in meta when falling back to read and
texsubimage, since texsubimage expects coordinates into 1D_ARRAY as
(width, slice, 0) instead of (width, 0, slice).
v2: Fix offset of scanline reads from the source. (Thanks Brian!), replace
dd.h comment with Paul's text and replace early exit with an assert.
Reviewed-by: Brian Paul <brianp@vmware.com> (v1)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
Reviewed-by: Paul Berry <stereotype441@gmail.com> (v1)
I noticed this code didn't work as advertised while doing some passing around
of TGSI shaders and trying to reparse them, and things failing.
This seems to fix it here for at least the small test case I hacked into a
graw test.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Commit 1f82bf12ed inadvertently broke it, checking for __IEEE_FLOAT on all
Alpha machines instead of only on VMS as before.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Fixes window skew seen while running gnome on a 16-bit screen over vnc.
NOTE: This is a candidate for stable release branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
Fixes a crash seen while running gnome on a 16-bit screen over vnc.
NOTE: This is a candidate for stable release branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
byteswap.h and bswap_32 aren't portable, replace them with calls to
gallium's util_bswap32 as suggested by Mark Kettenis. Lets these files
build on OpenBSD.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
gl can use elts without setting indices, in which case
our eltMax was set to 0 and always invoking the overflow
condition. So by default set eltMax to maximum, it will
be curbed by draw_set_indexes (if it ever comes) and if
not then it will let gl's glVertexPointer/glDrawArrays
work correctly. Fixes piglit's
triangle-rasterization-overdraw test.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Moves clearing of the draw so target buffers to the draw
module. They had to be cleared in the drivers before
which was quite messy.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Port BLT code in ilo_blit.c to BLT-based blitting methods of ilo_blitter. Add
BLT-based clears. The latter is verifed with util_clear(), but it is not in
use yet.
Primitive restart with an arbitrary cut index was first supported as of
Haswell. It's very doubtful that they'd take that away in future
hardware, so we may as well alter the check now.
The PRM suggests a larger layout, mostly to support having
gl_ClipDistance[] somewhere predictable for the fixed-function clipper
-- but it didn't actually arrive in Gen5.
Just use the same layout for both Gen4 and Gen5.
No Piglit regressions.
Improves performance in CS:S Video Stress Test by ~3%.
V2: - Remove now-useless function for determining the SF URB read offset
- Remove now-unused BRW_VARYING_SLOT_POS_DUPLICATE
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Required by ARB_shading_language_420pack. Note that the 420pack spec
incorrectly specifies their values as (Min, Max) = (-7, 8) when they
should be (-8, 7) as listed in the GLSL 4.30 and ESSL 3.0 specs.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Assert that we do not support user vertex/index/constant buffers. Issue a
warning when a sampler view is created for a resource without
PIPE_BIND_SAMPLER_VIEW.
The temporary texture should have either PIPE_BIND_RENDER_TARGET or
PIPE_BIND_DEPTH_STENCIL set in addition to PIPE_BIND_SAMPLER_VIEW.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
There are strict limits on those registers. Define the maximums
and use them instead of magic numbers. Also allows us to add
some extra sanity checks.
Suggested by Brian.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
We don't need the clamped variable, because we can just
return early. We should also do the regular culling after
the distance culling passes.
All spotted by Brian.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
When a resource is busy and is mapped with
PIPE_TRANSFER_DISCARD_WHOLE_RESOURCE, the underlying bo is replaced. We need
to mark states affected by the resource dirty.
With this change, we no longer have to emit vertex buffers and index buffer
unconditionally.
Even with hardware contexts, since we do not pin resources, we have to re-emit
the states so that the resources are referenced (by cp->bo) and their offsets
are updated in case they are moved. This also allows us to elimiate cp flush
in is_bo_busy().
Problem: The IEEE float optimized version of UNCLAMPED_FLOAT_TO_UBYTE
in macros.h computed incorrect results for inputs in the range
0x3f7f0000 (=0.99609375) to 0x3f7f7f80 (=0.99803924560546875)
inclusive. 0x3f7f7f80 is the IEEE float value that results in 254.5
when multiplied by 255. With rounding mode "round to closest even
integer", this is the largest float in the range 0.0-1.0 that is
converted to 254 by the generic implementation of
UNCLAMPED_FLOAT_TO_UBYTE. The IEEE float optimized version
incorrectly defined the cut-off for mapping to 255 as 0x3f7f0000
(=255.0/256.0). The same bug was present in the function
float_to_ubyte in u_math.h.
Fix: The proposed fix replaces the incorrect cut-off value by
0x3f800000, which is the IEEE float representation of 1.0f. 0x3f7f7f81
(or any value in between) would also work, but 1.0f is probably
cleaner.
The patch does not regress piglit on llvmpipe and on i965 on sandy
bridge.
Tested-by Stéphane Marchesin <marcheu@chromium.org>
Reviewed-by Stéphane Marchesin <marcheu@chromium.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
