Instead of storing a BO and offset separately, use an anv_address. This
changes anv_fill_buffer_surface_state to use anv_address and we now call
anv_address_physical and pass that into ISL.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
This refactors surface state filling to work entirely in terms of
anv_addresses instead of offsets. This should make things simpler for
when we go to soft-pin image buffers. Among other things,
add_image_view_relocs now only cares about the addresses in the surface
state and doesn't really need the image view anymore.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
These will be used to assign virtual addresses to soft pinned
buffers in a later patch.
Two allocators are added for separate 'low' and 'high' virtual
memory areas. Another alternative would have been to add a
double-sided allocator, which wasn't done here just because it
didn't appear to give any code complexity advantages.
v2 (Scott Phillips):
- rename has_exec_softpin to use_softpin (Jason)
- Only remove bottom one page and top 4 GiB from virt (Jason)
- refer to comment in anv_allocator about state address + size
overflowing 48 bits (Jason)
- Mention hi/lo allocators vs double-sided allocator in
commit message (Chris)
- assign state pool memory ranges statically (Jason)
v3 (Jason Ekstrand):
- Use (LOW|HIGH)_HEAP_(MIN|MAX)_ADDRESS rather than (1 << 31) for
determining which heap to use in anv_vma_free
- Only return de-canonicalized addresses to the heap
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
A later patch will make use of this in other places. Also, remove
dependency on undefined behavior of left-shifting a signed value.
v2: - move function into a separate header (Chris)
v3: (by Ken) Add new header to the various build systems.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Patch changes entrypoints generator to not skip this extension even
though it is set as disabled in the xml. We also need compilation
flag VK_USE_PLATFORM_ANDROID_KHR to be enabled.
It looks like this extension got disabled in commit 69f447553c.
v2: just remove the whole 'supported' attrib check + remove
vk_icd.h compilation fix (fix in VulkanHeaders instead)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
From the bspec docs for "Indirect State Pointers Disable":
"At the completion of the post-sync operation associated with this
pipe control packet, the indirect state pointers in the hardware are
considered invalid"
So the ISP disable is a post-sync type of operation which means that it
should be combined with a CS stall. Without this, the simulator throws
an error.
Fixes: 766d801ca "anv: emit pixel scoreboard stall before ISP disable"
Fixes: f536097f6 "i965: require pixel scoreboard stall prior to ISP disable"
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
We want to make sure that all indirect state data has been loaded into
the EUs before disable the pointers.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Fixes: 78c125af39 ("anv/gen10: Ignore push constant packets during context restore.")
Now that blorp handles all the cases, why not? The only real change we
have to make is to stop using anv_swizzle_for_render() in blorp_blit
because it doesn't work for B4G4R4A4 and blorp now natively handles that.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
According to Vulkan spec:
"pColorBlendState is a pointer to an instance of the
VkPipelineColorBlendStateCreateInfo structure, and is ignored if the
pipeline has rasterization disabled or if the subpass of the render pass the
pipeline is created against does not use any color attachments."
Fixes tests from CL#2505:
dEQP-VK.renderpass.*.simple.color_unused_omit_blend_state
v2:
- Check that blend is not NULL before usage.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This rollbacks the revert of this patch introduced with
commit 7cf284f18e.
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Initially, I didn't understand this feature. Turns out that all it
means is that you can switch multisample rates in the middle of a
zero-attachment subpass. We've been able to do this since forever.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
The previous logic of the supports_48b_addresses wasn't actually
checking if i915.ko was running with full_48bit_ppgtt. The ENOENT
it was checking for was actually coming from the invalid context
id provided in the test execbuffer. There is no path in the
kernel driver where the presence of
EXEC_OBJECT_SUPPORTS_48B_ADDRESS leads to an error.
Instead, check the default context's GTT_SIZE param for a value
greater than 4 GiB
v2 (Ken): Fix in i965 as well.
v3 Check GTT_SIZE instead of HAS_ALIASING_PPGTT (Chris Wilson)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously there was a special target that blocked for the generation of
anv_entrypoints.h, with meson 0.44 we don't need this, we can use a new
language feature instead. The problem is that previously that blocking
target would hide a race condition for the generation of another header,
anv_extensions.h. Now the build sometimes fails when anv_extensions.h is
not generated in time.
v2: - clarify the race condition in the commit message (Emil)
CC: Mark Janes <mark.a.janes@intel.com>
Fixes: 92550d9b16
("meson: remove workaround for custom target creating .h and .c files")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This patch enables the Vulkan driver on Ice Lake h/w
with added warning about preliminary support.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
meson has gotten pretty smart about tracking C and C++ dependencies
(internal and external), and using the right linker. This wasn't always
the case and we created empty c++ files to force the use of the c++
linker. We don't need that any more.
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
In more modern versions of meson a custom_target returns an index-able
object. This allows us to create accurate dependency models for targets
that rely only on the header and not on the code from anv_entrypoints.
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
base_vertex will be zero for non-indexed calls and in that case we
need vertex_id to be offset by the ‘first’ parameter instead. That is
what we get with first_vertex. This is true for both GL and Vulkan.
The freedreno driver is also setting vertex_id_zero_based on
nir_options. In order to avoid breakage this patch switches the
relevant code to handle SYSTEM_VALUE_FIRST_VERTEX so that it can
retain the same behavior.
v2: change a3xx/fd3_emit.c and a4xx/fd4_emit.c from
SYSTEM_VALUE_BASE_VERTEX to SYSTEM_VALUE_FIRST_VERTEX (Kenneth).
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
The base vertex in Vulkan is different from GL in that for non-indexed
primitives the value is taken from the firstVertex parameter instead
of being set to zero. This coincides with the new SYSTEM_VALUE_FIRST_VERTEX
instead of BASE_VERTEX.
v2 (idr): Add comment describing why SYSTEM_VALUE_FIRST_VERTEX is used
for SpvBuiltInBaseVertex. Suggested by Jason.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> [v1]
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We're not counting correctly with depth & stencil images.
Additionally we need to move an assert that is meant just for color
attachments.
v2: Move an assert() (Reported by Craig)
Change aspect mask checks (Francesco)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: a62a979335 ("anv: enable multiple planes per image/imageView")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105994
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
vulkan/genX_blorp_exec.c:69:1: warning: ‘blorp_get_surface_base_address’ defined but not used [-Wunused-function]
blorp_get_surface_base_address(struct blorp_batch *batch)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from vulkan/genX_blorp_exec.c:35:0:
./blorp/blorp_genX_exec.h:1249:1: warning: ‘blorp_emit_memcpy’ defined but not used [-Wunused-function]
blorp_emit_memcpy(struct blorp_batch *batch,
^~~~~~~~~~~~~~~~~
genX_blorp_exec.c:99:1: warning: ‘blorp_get_surface_base_address’ defined but not used [-Wunused-function]
blorp_get_surface_base_address(struct blorp_batch *batch)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from genX_blorp_exec.c:33:0:
../../../../../src/intel/blorp/blorp_genX_exec.h:1249:1: warning: ‘blorp_emit_memcpy’ defined but not used [-Wunused-function]
blorp_emit_memcpy(struct blorp_batch *batch,
^~~~~~~~~~~~~~~~~
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
All the information in vk_android_native_buffer.xml is now in vk.xml.
The only exception is the extension type attribute which we can work
around in the generators while we wait for the XML to be fixed.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Once we've gotten rid of everything but the main entrypoint, there's no
reason why we should go ahead and lower them all. This is what radv
does and it will make future work easier.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
v2 (Jason Ekstrand):
- Return the correct enum values from anv_layout_to_fast_clear_type
v3 (Jason Ekstrand):
- Always return ANV_FAST_CLEAR_NONE and leave doing the right thing for
the patch which adds a modifier which supports fast-clears.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Tested-by: Daniel Stone <daniels@collabora.com>
Acked-by: Nanley Chery <nanley.g.chery@intel.com>
Instead of updating the clear color in anv before a resolve, just let
blorp handle that for us during fast clears.
v5: Update comment about HiZ clear color (Jordan).
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Store the default clear address for HiZ fast clears on a global bo, and
point to it when needed.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
On Gen10+, instead of copying the clear color from the state buffer to
the surface state, just use the address of the state buffer in the
surface state directly. This way we can avoid the copy from state buffer
to surface state.
v4:
- Remove use_clear_address from anv code. (Jason)
- Use the helper to extract clear color from attachment (Jason)
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Extract the code from color_attachment_compute_aux_usage, so we can
later reuse it to update the clear color state buffer.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The size of the clear color struct (expected by the hardware) is 8
dwords (isl_dev.ss.clear_value_state_size here). But we still need to
track the size of the clear color, used when memcopying it to/from the
state buffer. For that we keep isl_dev.ss.clear_value_size.
v4:
- Add struct to gen11 too (Jason, Jordan)
- Add field for Converted Clear Color to gen11 (Jason)
- Add clear_color_state_offset to differentiate from
clear_value_offset.
- Fix all the places where clear_value_size was used.
v5 (Jason):
- Split genxml changes to another commit.
- Remove unnecessary gen checks.
- Bring back missing offset increment to init_fast_clear_color().
v6 (Jason):
- On init_fast_clear_color, change:
addr.offset += 4 => sdi.Address.offset += i * 4
- Use GEN_GEN instead of GEN_VERSIONx10.
[jordan.l.justen@intel.com: isl_device_init changes]
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The lower bits seem to have extra fields in every platform but gen8
(even though we don't use them in gen9). So just go ahead and avoid
using them for the address.
v4: Use Jason's suggestion for comment explaining the change.
v5: Fix aux_address comment in anv_private.h (Jason)
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
If we close the fd before calling DRM_IOCTL_PRIME_FD_TO_HANDLE the kernel
will hit a -EBADF error. Move the close(fd) call to the end of
anv_CreateDmaBufImageINTEL().
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2: rebased on top of subpass rework.
v3: rebased
v4:
- rebased
- reset pending clear views in one go rather one bit at a time (Caio)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
When multiview is active a subpass clear may only clear a subset of the
attachment layers. Other subpasses in the same render pass may also
clear too and we want to honor those clears as well, however, we need to
ensure that we only clear a layer once, on the first subpass that uses
a particular layer (view) of a given attachment.
This means that when we check if a subpass attachment needs to be cleared
we need to check if all the layers used by that subpass (as indicated by
its view_mask) have already been cleared in previous subpasses or not, in
which case, we must clear any pending layers used by the subpass, and only
those pending.
v2:
- track pending clear views in the attachment state (Jason)
- rebased on top of fast-clear rework.
v3:
- rebased on top of subpass rework.
v4: rebased.
v5 (Caio):
- Rebased.
- Initialize pending clear views to only have bits set for layers
that exist.
- Reset pending clear views in one go rather one bit at a time.
- Put "last subpass for this attachment" condition in a separate
function to simplify the conditional that resets pending_clear_aspects.
Fixes:
dEQP-VK.multiview.readback_implicit_clear.*
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The new name make the zero-input behavior more obvious. The next
patch adds a new function with different zero-input behavior.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Suggested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Generated with
git grep -l nir_intrinsic_image | xargs \
sed -i 's/nir_intrinsic_image/nir_intrinsic_image_var/g'
and some manual fixing in nir_intrinsics.h
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
