Move tfu_supports_tex_format() and
get_internal_type_bpp_for_output_format() from v3dvx_private.h
to v3dvx_format_table.h.
Move v3dv_format_plane and v3dv_format struct from v3dv_private.h
to v3dv_format_table.h.
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38732>
Set the per-pixel mask based on the value of skip_helpers.
This slightly increase the performance on several traces.
fps_avg helped: gl_gfxbench_trex.trace: 22.30 -> 22.79 (2.20%)
total fps_avg in all runs: 55.18 -> 55.71 (0.97%)
total fps_avg in affected (through threshold) runs: 22.30 -> 22.79 (2.20%)
helped: 1
HURT: 0
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Georg Lehmann <dadschoorse@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38759>
Just changing the intrinsic for load_push_constant is wrong, as nothing
guarantees they will have the same indices in the future.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Georg Lehmann <dadschoorse@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38759>
It will be used with image loads to enable or disable helper invocations.
This fixes a Vulkan CTS test that perform an imageLoad() inside a
fwidth() operation.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Georg Lehmann <dadschoorse@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38759>
Set it to 500 tests, as if just only one test fails the asan, all the
tests will be marked as fail too. Keeping the size smaller, will allow
to process later to bisect searching for the tests that actually expose
the issue.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/39022>
v3d_nir_lower_load_store_bitsize that uses nir_lower_mem_access_bit_sizes
already ensures that any writemask on store has consecutive bits set.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38921>
Replace the duplicated swapchain image detection pattern across all
Vulkan drivers with the new wsi_common_is_swapchain_image() helper.
Since the swapchain handle can be extracted from VkImageCreateInfo's
pNext chain inside wsi_common_create_swapchain_image(), remove the
now-redundant VkSwapchainKHR parameter from that function.
This removes the #ifdef guards for Android/WSI platforms from each
driver, as the helper now handles this uniformly.
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Yiwei Zhang <zzyiwei@chromium.org>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Yonggang Luo <luoyonggang@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38541>
This is only compile tested. I have not collected any shader-db or
fossil-db data.
v2: Drop the calls to nir_opt_constant_folding. The builder in
nir_lower_flrp will already take care of this.
v3: NIR_PASS_V is gone. Noticed by Marge.
Acked-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12526>
Weird that CTS did not catch that ...
Signed-off-by: Hans-Kristian Arntzen <post@arntzen-software.no>
Fixes: 11195eb8de ("vulkan: Add KHR_swapchain_maintenance1 promotions.")
Reviewed-by: Georg Lehmann <dadschoorse@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38728>
We have nir_lower_sysvals_to_varyings() so we can just have that lower
it for the drivers who don't want a sysval. Most have to support the
sysval version anyway for various lowering so making them all have to
support both is pretty annoying.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@intel.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38562>
For umul24 we expose the operation as UMUL24_RTOP0 so we can identify
the difference between umul24 as part of a sequence generated from an
imul as "multop+umul24" and a simple umul24 where rtop will always be 0.
For umul24_rtop0 instructions we relax the scheduling restrictions,
so they don't need to be serialized like the multop+umul24 ops. But
we maintain the read dependency with the last_rtop.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38642>
All drivers use the same callback and it is unlikely that new drivers will use
this pass since it has better replacements today (lower_mem_bit_sizes for
memory, and it never worked for I/O). This should discourage as much.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38533>
If the library_path is just a basename like `libvulkan_lvp.so`, then we
can share the same JSON manifest like `lvp_icd.json` between all of the
architectures, like we already do for Vulkan layers. The library will
be looked up in the dynamic linker's default search path in this case,
and in practice will be found in `${libdir}`. This is how the Mesa's
EGL driver and Vulkan layers work, how Mesa is packaged in Debian 13,
and also how the Nvidia proprietary driver works; it makes installation
simpler for distros, especially on multiarch systems like Debian and
the freedesktop.org SDK.
However, if we want a separate manifest per architecture in order to
be able to write the full path into it, we still need per-architecture
filename disambiguation like `lvp_icd.x86_64.json`.
We presumably still want a separate per architecture on Windows, because
the concept of a single monolithic `${libdir}` is less common there, and
it can also be helpful during development when setting `$VK_DRIVER_FILES`
to force the use of a specific driver installed in a non-default location.
Use the following parameter to passed to vk_icd_gen:
'--icd-lib-path', vulkan_icd_lib_path,
'--icd-filename', icd_file_name,
output : 'virtio_icd.' + vulkan_manifest_suffix,
and the output is passed by '--out', '@OUTPUT@',
so we can detect vulkan_manifest_per_architecture from the --out parameter in script.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/13745
Signed-off-by: Simon McVittie <smcv@collabora.com>
Co-authored-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Mel Henning <mhenning@darkrefraction.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37314>
Moving `ci-tron:priority:` out of the variable because an empty value
will not be authorized, and this makes it obvious if that bug ever
happens (job will not be picked up and gitlab will complain that
`ci-tron:priority:` is not a tag registered by any runner), instead of
getting picked up by any runner that will then reject (fail) the job.
(This is caused by GitLab's API not allowing tags to be enforced when
picking up jobs, resulting in jobs with missing tags being picked up by
any runner, like the bug we had with the generic fd.o runners a few
months ago.)
v2 (Martin Roukala):
* use the priority tags in all amdgpu jobs
* add missing tags in etnaviv jobs
* add missing tags in broadcom jobs
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37897>
Enable more CI-Tron jobs to be run in parallel with baremetal ones.
Disable the baremetal ones for those who CI-Tron jobs has already been
tested enough.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38610>
Unlike textures, we can't easily do format-conversion of the data
before, because the source is a buffer object and not a texture object.
But we already have a hammer for this in Mesa, which means we'll drop
the ARB_texture_buffer_object extension support, but only for the OpenGL
compatibility profile. We still get GL 3.2 exposed.
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38162>
Rather than adding another boolean to optionally lower PLS vars, pass
the types we want to lowers through a nir_variable_mode bitmask.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric R. Smith <eric.smith@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37110>
This adds a new instruction type to handle cooperative matrix calls.
This clones the call instr, drops callee, and adds a single metadata
slot and a call operation (dummy only for now).
(Not NACKed by Alyssa)
Reviewed-by: Georg Lehmann <dadschoorse@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38389>
CI-tron currently requires a number of minutes to also be set, so let's
just pick some huge value that will never actually trigger, leaving the
OVERALL timeout as the only one that applies.
Fixes: ee5a95319d ("broadcom/ci: automatically reboot rpi3 when they fail to find the root device")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38461>
We add a bunch of new helpers to avoid the need to touch >parent_instr,
including the full set of:
* nir_def_is_*
* nir_def_as_*_or_null
* nir_def_as_* [assumes the right instr type]
* nir_src_is_*
* nir_src_as_*
* nir_scalar_is_*
* nir_scalar_as_*
Plus nir_def_instr() where there's no more suitable helper.
Also an existing helper is renamed to unify all the names, while we're
churning the tree:
* nir_src_as_alu_instr -> nir_src_as_alu
..and then we port the tree to use the helpers as much as possible, using
nir_def_instr() where that does not work.
Acked-by: Marek Olšák <maraeo@gmail.com>
---
To eliminate nir_def::parent_instr we need to churn the tree anyway, so I'm
taking this opportunity to clean up a lot of NIR patterns.
Co-authored-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38313>
This adds from_wsi field to v3dv_image, so we can apply simulator stride
alignment only to WSI images.
Handling VK_STRUCTURE_TYPE_WSI_IMAGE_CREATE_INFO_MESA at
v3dv_GetPhysicalDeviceFormatProperties2 also removes debug warnings like:
MESA: debug: v3dv_GetPhysicalDeviceImageFormatProperties2: ignored VkStructureType Unknown VkStructureType value.(1000001002)
Fixes: 562bb8b62b ("v3dv: align width to 256 when using simulator")
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38374>
On Mali, we need not only clamp but also convert to float16 on Valhall+.
We could have a separate pass for this but it fits in nicely with the
rest of nir_lower_point_size() so we might as well put it there.
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38379>
The size and stage parameters are left-overs from history. Originally,
the function acted on a list and so it needed an explicit stage and size
output. Now that it takes a NIR shader and a mode, we can just take the
stage from the shader and set num_(in|out)puts.
The one caller that actually used the explicit output parameter was
turnip. However, given that the helper sorts and re-numbers all the I/O
variables, it's not like changing num_(in|out)puts instead of writing it
to some other location is that big of a deal.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38297>
