the fs samplemask needs to be updated on framebuffer rebind and on
fs bind to ensure that the key gets updated in time for the pipeline
change
fixes#5559
cc: mesa-stable
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13531>
the uint[1] -> uint dance is only relevant on the first load, so move
the variable type shuffling inside the create block to avoid breaking successive
loads
fixes#5543
cc: mesa-stable
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13488>
OpenGL 3.0 requires the driver can draw to 8 simultaneous render
targets. Similarly, OpenGL ES 3.0 requires the driver can draw to 4
simultaneous render targets. Fix the version computation logic to take
this into account.
On Mali T720, we support ~all features of OpenGL ES 3.1 except we only
support a single render target. Mali T720 should advertise OpenGL 2.1
and OpenGL ES 2.0 only. With the previous logic, it incorrectly
advertised OpenGL ES 3.1.
v2: Lie about the minimum for GL 3.0 to make freedreno a3xx happy. Add
Emma's reviewed-by.
v3: Update the Mali T720 CI expectations. There are tests that pass on
GLES3 but not GLES2. Unclear if these are dEQP bugs or Mesa bugs, lima
hits the same issues. Add them to the known fails
Note to mesa-stable maintainers: this downgrades the OpenGL version
advertised on Mali T720. As such, this patch should apply to the
unreleased 21.3 (Eric) but should NOT be backported to any released Mesa
versions (21.2 or older should NOT have this patch). This is a bit of a
compromise; Emma agreed with this plan on IRC.
Reported-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net> [v2]
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu> [v2]
Cc: 21.3 mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13455>
nir_lower_blend was written against the OpenGL ES 3.2 specification,
which does not support blending SNORM render targets. The ES spec
says that non-floating point buffers get clamped to [0, 1] before
blending. The story is not so simple: SNORM buffers are blendable in
OpenGL and must clamped to [-1, 1] rather than [0, 1]. Handle this case.
NIR does have the fsat_signed_mali instruction to clamp to [-1, 1], but
it is only implemented in Panfrost, and this pass is in common code.
Open code it instead. Panfrost optimizes the open coded version, so this
is good enough.
Fixes SNORM subtests of Piglit arb_texture_view-rendering-formats.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13499>
When constructing the Internal Blend Descriptor for fixed-function
blending, set the alpha_zero_nop/one_store flags based on the given
equation.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13508>
Compute whether these flags can be set when constructing the blend CSO
and pass them in the appropriate place in the Internal Blend Descriptor.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13508>
For each blend mode in our blending unit tests, add whether we can set
the alpha_zero_nop and alpha_one_store flags and check against the
predicates.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13508>
Some Mali GPUs can avoid storing to the tilebuffer if src alpha = 0, and
can replace blending with a store if src alpha = 1. This saves power in
the common case of alpha blending. Add predicates to check if these
optimizations are valid for a given blend equation.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13508>
Make it clear that the distinction is the facingness of the primitives
the depth bias applies to.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13509>
adding the states requires that vertex attribs be bound, but it's illegal
to bind 0 attribs
cc: mesa-stable
fixes#5558
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13519>
Unless we are combining multiple workgroups in the same HW thread,
there's no advantage of using SIMD16 when SIMD8 already fits the
entire workgroup.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13249>
Variable workgroup size works by compiling as much SIMD variants as
possible and then selecting the right one during dispatch (when the
actual workgroup size is passed to us).
Instead of replicating the logic in a separate function, reuse the
same logic for regular SIMD selection. And move function for that
together with the remaining simd selection functions.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13249>
Clean up the logic and move it to functions that work with prog_data
attributes to select the right SIMD. This shouldn't change any
behavior compared to the original.
Having it extracted will allow reuse by Task/Mesh and make it easier
to write tests.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13249>
zink_resource_has_binds() only checks descriptor binds, and this doesn't
include streamout or fb bindings, so call these functions from the specific
rebind points to ensure those cases are also checked
fixes#5541
cc: mesa-stable
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13490>
u_reduced_prim() can't determine the output primitive when vs isn't the
last vertex stage, so store this from the appropriate shader info and use
it when it's available
fixes#5547
cc: mesa-stable
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13487>
this migrates existing uses of zink_descriptor_layout_key to use
zink_descriptor_pool_key instead, which ends up being more helpful overall
since it puts all the pool-related data into a single struct
this also has a(n incredibly small) benefit of removing VkDescriptorPoolSize[6]
from every program data struct and deduplicating it into the descriptor
pool key set
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13483>
Depending on whether an application creates a swapchain with
VK_COMPOSITE_ALPHA_PRE_MULTIPLIED_BIT_KHR or not, we might use 2
different formats with the compositor.
This change makes sure that we support all the underlying formats
before exposing the corresponding VkFormat to the application.
v2: Don't forget get_formats2() (Ivan)
v3: Replace formats with availability boolean (Simon)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 151b65b211 ("vulkan/wsi/wayland: generalize modifier handling")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5522
Reviewed-by: Ivan Briano <ivan.briano@intel.com> (v2)
Reviewed-by: Simon Ser <contact@emersion.fr>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13453>
While panfrost doesn't support multi-planar formats directly, we might
still import multi-planar BOs through GBM (for example, when doing direct
scanout in weston).
We can support PIPE_RESOURCE_PARAM_NPLANES by simply counting the
planes we have.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13039>
While panfrost doesn't directly support planar formats, we can get here
from GBM. This happens, for example, when weston is trying to use a BO
for direct scanout.
Walk the list of planes to find the right one.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13039>
This is allowed and the fragment shader should read zero.
No fossils db changes.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13222>
This is the default version in gentoo, and it apparently uses the lua54
variant rather than lua.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emma Anholt <emma@anholt.net>
Acked-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13510>
