Due to a gaffe on my part, we were re-emitting all binding table entries
on every single draw call. The push_constant_packets atom listens to
BRW_NEW_DRAW_CALL, but skips emitting 3DSTATE_CONSTANT_XS for each stage
unless stage_state->push_constants_dirty is true. However, it flagged
BRW_NEW_SURFACES unconditionally at the end, by mistake.
Instead, it should only flag it if we actually emit 3DSTATE_CONSTANT_XS
for a stage. We can move it a few lines up, inside the loop - the early
continues will skip over it if push constants aren't dirty for a stage.
With INTEL_NO_HW=1 set, improves performance of GFXBench5 gl_driver_2
on Apollolake at 1280x720 by 1.01122% +/- 0.470723% (n=35).
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Groups containing fields smaller than a DWord were not being decoded
correctly. For example:
<group count="32" start="32" size="4">
<field name="Vertex Element Enables" start="0" end="3" type="uint"/>
</group>
gen_field_iterator_next would properly walk over each element of the
array, incrementing group_iter, and calling iter_group_offset_bits()
to advance to the proper DWord. However, the code to print the actual
values only considered iter->field->start/end, which are 0 and 3 in the
above example. So it would always fetch bits 3:0 of the current DWord
when printing values, instead of advancing to each element of the array,
printing bits 0-3, 4-7, 8-11, and so on.
To fix this, we add new iter->start/end tracking, which properly
advances for each instance of a group's field.
Caught by Matt Turner while working on 3DSTATE_VF_COMPONENT_PACKING,
with a patch to convert it to use an array of bitfields (the example
above).
This also fixes the decoding of 3DSTATE_SBE's "Attribute Active
Component Format" fields.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Fixes fbo-blending-formats on RGB8 and 565. We will still need to demote
blending to shader code in the MRT case to fix it in general, but that can
be added when we start doing 32F blending (which also needs to be done in
the shader).
The previous packing I did got us all the R*16F and R*32F formats, where
the pipe format basically matched the TLB's format, but since the clear
color will just be memcpyed to the TLB, we should be looking at its format
for deciding how to pack.
Fixes RGB565, RGB5_A1 and RGBA10 fbo-clear-formats tests and improves
4444.
The output formats are consistent with their channels appearing from low
to high in their name. Textures are interpreted the same way, but their
names may have the channels swapped around. I'm retaining the texture
names so that we are consistent with the documentation, but I want to
leave a warning for others.
In the case of fneg(0.0), we were getting back 0.0 instead of -0.0. We
were also needing an immediate 0 value for ineg, when there's an opcode to
do the job properly.
Fixes fs-floatBitsToInt-neg.shader_test.
We were storing the resolved pixels in all cases, but nr_samples > 0 means
we should be keeping the per-sample values.
We will probably want to change the job structure at some point, as we'll
want to recognize full-buffer resolves and do the resolved store in the
same job as the original rendering, meaning we'll need to track both the
MSAA and single-sample resources in the job. However, this will be enough
to build the rest of the MSAA support.
The HW has no native sampler support for multisample textures, but since
we only need to support txf_ms and the layout is UIF, we just need to
scale up the texcoords and then add in the sample.
This drops the old TEXTURE_MSAA_ADDR special uniform, since we're treating
MSAA textures as textures, rather than basically texbos like VC4 had to.
We just need to multiply width/height by 2 each, and always set them up as
UIF tiling, since that's how the TLB will store them in raw (per-sample)
mode.
We were handing the intra-byte padding fine, but with a 24-bit address
(bottom 8 bits implied 0) we would end up off by 8 bytes in our shift,
impacting vc5's load/store general packets (all other packets we have had
<8 bits of padding).
We only have 2x16 unpacking in our ALUs. To enable this, we also need
lower_fdiv for its new instructions, which had been handled at a higher
level previously.
I already had the texture's wrapping set up to use different behavior for
nearest or linear, so we just needed to saturate the coordinates in linear
mode to get the "proper" blend between the edge and border values.
1D is the exception to "all V3D textures are tiled", since tiling 1D
textures would just waste memory and cache space. This ended up being a
problem once we started actually marking 1D textures as 1D instead of 2D.
Like VC4, we need to at least have one element set up, but unlike VC4 it
seems we don't need to read it to keep the HW happy. Fixes GPU hangs with
glsl-no-vertex-attribs.shader_test.
>From GLSL 4.5 spec, section "7.1 Built-In Language Variables", page 130 of
the PDF states:
"If multiple shaders using members of a built-in block belonging to
the same interface are linked together in the same program, they must
all redeclare the built-in block in the same way, as described in
section 4.3.9 “Interface Blocks” for interface-block matching, or a
link-time error will result."
Fixes:
* GL45-CTS.CommonBugs.CommonBug_PerVertexValidation
v2 (Neil Roberts):
Explicitly look for gl_PerVertex in the symbol tables instead of
waiting to find a variable in the interface.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102677
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Eduardo Lima Mitev <elima@igalia.com>
Signed-off-by: Neil Roberts <nroberts@igalia.com>
This effectively factorizes a couple of similar routines.
v2 (Neil Roberts): Non-trivial rebase on master
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Eduardo Lima Mitev <elima@igalia.com>
Signed-off-by: Neil Roberts <nroberts@igalia.com>
Some symbols gathered in the symbols table during parsing are needed
later for the compile and link stages, so they are moved along the
process. Currently, only functions and non-temporary variables are
copied between symbol tables. However, the built-in gl_PerVertex
interface blocks are also needed during the linking stage (the last
step), to match re-declared blocks of inter-stage shaders.
This patch adds a new utility function that will factorize current code
that copies functions and variables between two symbol tables, and in
addition will copy explicitly declared gl_PerVertex blocks too.
The function will be used in a subsequent patch.
v2 (Neil Roberts):
Allow the src symbol table to be NULL and explicitly copy the
gl_PerVertex symbols in case they are not referenced in the exec_list.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Eduardo Lima Mitev <elima@igalia.com>
Signed-off-by: Neil Roberts <nroberts@igalia.com>
NIR does not have these instructions. TGSI and Mesa IR both implement
them using < and >=, repsectively. Removing them deletes a bunch of
code and means I don't have to add code to the SPIR-V generator for
them.
v2: Rebase on 2+ years of change... and fix a major bug added in the
rebase.
text data bss dec hex filename
8255291 268856 294072 8818219 868e2b 32-bit i965_dri.so before
8254235 268856 294072 8817163 868a0b 32-bit i965_dri.so after
7815339 345592 420592 8581523 82f193 64-bit i965_dri.so before
7813995 345560 420592 8580147 82ec33 64-bit i965_dri.so after
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Without the lexer changes, tests/glslparsertest/glsl2/tex_rect-02.frag
fails. Before this change, the parser would determine that
sampler2DRect is not a valid type because the call to
state->symbols->get_type() in ast_type_specifier::glsl_type() would
return NULL. Since ast_type_specifier::glsl_type() is now going to
return the glsl_type pointer that it received from the lexer, it doesn't
have an opportunity to generate an error.
text data bss dec hex filename
8255243 268856 294072 8818171 868dfb 32-bit i965_dri.so before
8255291 268856 294072 8818219 868e2b 32-bit i965_dri.so after
7815195 345592 420592 8581379 82f103 64-bit i965_dri.so before
7815339 345592 420592 8581523 82f193 64-bit i965_dri.so after
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This allows us to use a single token for every built-in type except void.
text data bss dec hex filename
8275163 269336 294072 8838571 86ddab 32-bit i965_dri.so before
8255243 268856 294072 8818171 868dfb 32-bit i965_dri.so after
7836963 346552 420592 8604107 8349cb 64-bit i965_dri.so before
7815195 345592 420592 8581379 82f103 64-bit i965_dri.so after
Yes, the 64-bit binary shrinks by 21k.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Passing YYSTYPE into classify_identifier enables a later patch.
text data bss dec hex filename
8310339 269336 294072 8873747 876713 32-bit i965_dri.so before
8275163 269336 294072 8838571 86ddab 32-bit i965_dri.so after
7845579 346552 420592 8612723 836b73 64-bit i965_dri.so before
7836963 346552 420592 8604107 8349cb 64-bit i965_dri.so after
Yes, the 64-bit binary shrinks by 8k.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
There are two callers of the constructor, and they are right next to
each other. Move the "#anon_struct" name handling to the parser so that
the conditional can be removed.
I've also deleted part of the comment (about the memory leak) because I
don't think it's quite accurate or relevant.
text data bss dec hex filename
8310399 269336 294072 8873807 87674f 32-bit i965_dri.so before
8310339 269336 294072 8873747 876713 32-bit i965_dri.so after
7845611 346552 420592 8612755 836b93 64-bit i965_dri.so before
7845579 346552 420592 8612723 836b73 64-bit i965_dri.so after
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Having moved gallium_dri.so library to /vendor/lib/dri
also symlinks need to be coherently created using TARGET_OUT_VENDOR instead of TARGET_OUT
or all non Intel drivers will not be loaded with Android N and earlier,
thus causing SurfaceFlinger SIGABRT
(v2) simplification of post install command
Fixes: c3f75d483c ("Android: move libraries to /vendor")
Cc: 17.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com> (v1)
Reviewed-by: Rob Herring <robh@kernel.org> (v1)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
