The predication is based on the mip level, so if the image has layers
and DCC is enabled, it should only be used if the range of layers
covers the whole image.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8368>
Remove one old comment because it supports decompressing layers.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8368>
We wouldn't initialize it if the X server didn't support the RANDR
extension (though that's unlikely these days).
Fixes: b5268d532a "wsi/x11: Detect Xwayland"
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8393>
Instead of creating a new wsi_x11_connection every time.
Fixes memory leak and bad performance.
Fixes: 4292fb2139 "wsi/x11: Use PresentOptionAsync for MAILBOX present mode with Xwayland"
Reported-by: Chris Rankin <rankincj@yahoo.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8393>
If the instruction being coalesced would be vectorized but the target
doesn't support vectorizing that op, skip coalescing.
Reuse the callbacks from alu_to_scalar to describe which ops should not
be vectorized.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6506>
If we change the virtual address we also have to change the offset in the buffer
to be mapped.
Fixes: 715df30a4e "radv/amdgpu: Add winsys implementation of virtual buffers."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7953>
Found a case where we mapped a range too many.
Per the comment the constraint is:
/* [first, last] is exactly the range of ranges that either overlap the
* new parent, or are adjacent to it. This corresponds to the bind ranges
* that may change.
*/
So that means that after the ++last we the ranges[last] should still
be adjacent. So we need to test the post-increment value to see whether
it is adjacent.
Failure case:
ranges:
0: 0 - ffff
1: 10000 - 1ffff
2: 20000 - 2ffff
3: 30000 - 3ffff
new range: 10000 - 1ffff
wrong first, last: 0,3
However range 3 clearly isn't adjacent at all.
Fixes: 715df30a4e "radv/amdgpu: Add winsys implementation of virtual buffers."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7953>
For GFX9 I didn't reuse the existing mipmap offset/pitch because
last time we did that there was a revert request from Marek.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7953>
If the current layout isn't compressed we don't have to re-initialize
the HTILE metadata.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8389>
This was added to workaround some CTS failures which no longer happen.
Note that radv_clear_htile() will only clear the depth or stencil
bytes of the HTILE buffer based on the aspect.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8389>
iview can be NULL inside a secondary command buffer.
Fixes: 00064713a3 ("radv: determine at creation if an image view can be fast cleared")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8408>
Even if the FCE predicate is FALSE, we might still need to decompress
FMASK if compressed rendering was used. FMASK decompressions should
never been predicated.
This fixes a ton of CTS failures and a rendering issue with Control
when DCC+MSAA is force-enabled.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8331>
This can be determined earlier than every time a clear is performed
by the driver, it probably saves a bunch of CPU cycles.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8370>
This is mostly to get additional -Werror coverage to avoid introducing
unforced ILP32 or big-endian errors. i386 adds lavapipe, r600, nouveau,
zink, and all the classic drivers. ppc64le adds lavapipe and zink, and
also adds -Werror for symmetry with the other cross builds. s390x also
adds lavapipe and zink.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8394>
The PACK32 Vulkan formats need to map to the corresponding XYZWxxxx pipe
formats, since the latter take endianness into account.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8394>
The gcc we're using (and quite possibly newer ones) throws a really
stupid error:
../src/gallium/drivers/nouveau/nouveau_buffer.c:765:22: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
buffer->address = (uint64_t)user_ptr;
Which... address is a uint64_t, and user_ptr is a void *, so this is
completely unambiguously safe to do. Apparently casting to uintptr_t
squelches this, so do that instead.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8394>
When running gles3 deqp's with ETNA_MESA_DEBUG=deqp we fake streamout support.
CSO thinks that streamout is supported and calls ctx->pipe->set_stream_output_targets(..)
in cso_destroy_context(..) which results in a null-pointer access.
Add a stub to make development easier.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8382>
The general convention we use is "pscreen" for the pipe_screen, and
"screen" for the zink_screen, so let's stick with that here also.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8402>
