This case is never hit, we don't have a nir intrinsic for this spirv
opcode. And when we do, I'm not sure if it would be vectorized or not.
So best just to drop this case.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5505>
The fix in the previous patch removed an erronous attempt to skip
resizing variable types in each stage. Now that has been removed
iterating over each shader stage is no longer required here.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5487>
The initial support tried to match uniform variables from different
shaders based on the variables pointer. This will obviously never
work, instead here we use the variables name whcih also means we
must disable this optimisation for spirv.
Using the base variable name works because when collecting uniform
references we never iterate past the first array dimension, and
only support resizing 1D arrays (we also don't support resizing
arrays inside structs).
We also drop the resized bool as we can't skip processing the var
just because is was resized in another shader, we must resize
the var in all shaders.
Fixes: a34cc97ca3 ("glsl: when NIR linker enable use it to resize uniform arrays")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3130
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5487>
All the other driver-specific intrinsics are at the end of the file so
Intel's should go there too.
Reviewed-by: Sagar Ghuge<sagar.ghuge@intel.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5503>
Validate that num_components is only set for vectorized instructions, to
prevent other nir passes or driver backends from mistakenly relying on
num_components for non-vectorized instructions.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5371>
Of the possible intrinsics generated, only load_ssbo is vectorized (and
store_ssbo is never generated)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5371>
It's tricky to merge XFB-outputs correctly, because we need there to not
be any overlaps when we get to `nir_gather_xfb_info_with_varyings` later
on. We currently trigger an assert there if we end up merging here.
So let's not even try. This is an optimization, and we can optimize this
in safe cases later if needed. For now, let's play it safe.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5329>
This seems valid per the SPIR-V spec to use OpSampledImage with
OpUndef instead of OpTypeImage or OpTypeSampler. When the image
operand is undefined, SPIRV->NIR emits an undef instruction that
can be removed later by the compiler.
This fixes shader compilation crashes with Red Dead Redemption II.
Cc: mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5230>
When handling function inputs the optimisation pass incorrectly
assumes the inputs are undefined. Here we simply change things to
assume inputs have always been assigned a value. Any further
optimisations will be taken care of once function inlining takes
place.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2984
Fixes: 65122e9e80 ("ir_constant_variable: New pass to mark constant-assigned variables constant.")
Reviewed-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5413>
There are some passes which really work on the shader level and it's
easier if we have a helper which preserves metadata on the whole shader.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5171>
Depth and stencil writes are combined with color writes, so we need
this intrinsic which has sources for color, RT, depth and stencil.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5065>
In case shader contains two equal macro defines, first one with trailing spaces
and the second one without.
`#define A 1 `
`#define A 1`
The parser crashes
Fixes: 0346ad3774 ("glsl: ignore trailing whitespace when define redefined")
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5312>
NVIDIA hardware doesn't have an equivilant to bfi, but we do already have
a lowering for bitfield_insert->bfi.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5373>
The combination must stop when we see a scoped barrier that have
execution scope, i.e. it has control barrier behavior. The code was
mistakenly looking at the wrong scope.
Fixes: 345b5847b4 ("nir: Replace the scoped_memory barrier by a scoped_barrier")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5365>
Fixes: 3ed2123d77 ("spirv: Use scoped barriers for SpvOpControlBarrier")
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5365>
Fixes: 345b5847b4 ("nir: Replace the scoped_memory barrier by a scoped_barrier")
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5365>
Make sure to propagate the NON_UNIFORM access for UBO loads, so
that non-uniform loads are correctly lowered.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5311>
asin(x) is now implemented using a piecewise approximation, which
improves the precision for |x| < 0.5
Previously, we were using a polynomial approximation for both the
asin() and acos() functions. Unfortunately, for asin(), this polynomial
does not have enough precision to satisfy the Vulkan CTS requiremenents,
which define the asin() precision based on the precision of
atan2(x, sqrt(1.0 - x*x)). The piecewise approximation gives the needed
precision in the problematic range.
v2: Skip the piecewise approximation for acos
Closes: #1843
Acked-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3809>
For shaders where there's already a psiz-variable, we should rather
reuse it than create a second one. This can happen if a shader writes
gl_PointSize, but disables GL_PROGRAM_POINT_SIZE.
Fixes: 878c94288a ("nir: add lowering-pass for point-size mov")
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5328>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5318>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5318>
Needed by the next patch, for c++ code which is more strict about
conversions between integers and enums.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5318>
Here we turn on uniform array resizing in the NIR linker and disable
the GLSL IR resizing pass when the NIR linker is enabled.
This will potentially make uniform arrays smaller due to NIR
optimising away more uniform uses.
Shader-db results (SKL):
total instructions in shared programs: 14947192 -> 14944093 (-0.02%)
instructions in affected programs: 138088 -> 134989 (-2.24%)
helped: 822
HURT: 4
total cycles in shared programs: 324868402 -> 324794597 (-0.02%)
cycles in affected programs: 3904170 -> 3830365 (-1.89%)
helped: 2333
HURT: 1485
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4910>
We want to gather information for all stages here before the main
linking loop. In the following patch we will use to information
to reduce the size of uniform arrays where possible.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4910>
This will be used to reduce the size of uniform arrays and replace
the current glsl ir pass. Doing this in NIR allows us to better
optimise the size of uniform arrays.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4910>
If use_scoped_barrier is set to true, we don't have to split the control
and memory barriers.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4900>
SPIRV OpControlBarrier can have both a memory and a control barrier
which some hardware can handle with a single instruction. Let's
turn the scoped_memory_barrier into a scoped barrier which can embed
both barrier types. Note that control-only or memory-only barriers can
be supported through this new intrinsic by passing NIR_SCOPE_NONE to the
unused barrier type.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Suggested-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4900>
We are about to add support for scoped control+memory barriers. Let's
move the convert from SPIRV to NIR enums logic in helpers so we can
easily re-use them.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4900>
This is now possible as we do uniform linking via a nir based linker.
Shader-db results for IRIS (SKL):
total instructions in shared programs: 14947192 -> 14946397 (<.01%)
instructions in affected programs: 39498 -> 38703 (-2.01%)
helped: 230
HURT: 18
total cycles in shared programs: 324868402 -> 324847058 (<.01%)
cycles in affected programs: 706701 -> 685357 (-3.02%)
helped: 599
HURT: 449
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4797>
This helper reflects the rules we follow in the GLSL IR linker when
deciding if we can remove a dead uniform. This check is required to
avoid regressions when turning on NIR dead uniform clean up in the
following patch.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4797>
This allows us to do API specific checks before removing variable
without filling nir_remove_dead_variables() with API specific code.
In the following patches we will use this to support the removal
of dead uniforms in GLSL.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4797>
