LLVM 3.0svn changes pretty rapidly. The change in
Target->createMCInstPrinter() signature which inspired commits
40ae214067 and
92e29dc5b0 has been reverted.
Signed-off-by: Gustaw Smolarczyk <wielkiegie@gmail.com>
Signed-off-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit fc98444bd5)
Conflicts:
src/gallium/auxiliary/gallivm/lp_bld_debug.cpp
Otherwise PIPE_FORMAT_X8B8G8R8_UNORM and friends would fail.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 292148dc4b)
From the OpenGL docs for GL_ARB_explicit_attrib_location:
This extension provides a method to pre-assign attribute locations to
named vertex shader inputs and color numbers to named fragment shader
outputs.
This was accidentally implemented for fragment shader inputs. This
patch fixes it to apply to fragment shader outputs.
Fixes piglit tests
spec/ARB_explicit_attrib_location/1.{10,20}/compiler/layout-{01,03,06,07,08,09,10}.frag
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38624
(cherry picked from commit b078aad8ab)
Fixes an assertion failure in the piglib out-01.frag
ARB_explicit_attrib_location test. The locations set via the layout
qualifier in fragment shader were not being applied to the shader
outputs. As a result all of these variables still had a location of
-1 set.
This may need some more work for pre-3.0 contexts. The problem is
dealing with generic outputs that lack a layout qualifier. There is
no way for the application to specify a location
(glBindFragDataLocation is not supported) or query the location
assigned by the linker (glGetFragDataLocation is not supported).
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38624
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Vinson Lee <vlee@vmware.com>
(cherry picked from commit d32d4f780f)
And don't delete them. Let ralloc clean them up. Deleting the
temporary IR leaves dangling references in the prog_instruction. That
results in a bad dereference when printing the IR with MESA_GLSL=dump.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38584
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit dbda466fc0)
The set of values initially available (before any kills) must be
tracked with each constant in the set. Otherwise the wrong component
can be selected after earlier components have been killed.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=37383
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Matthias Bentrup <matthias.bentrup@googlemail.com>
(cherry picked from commit 0eb9797958)
Use
$(MKLIB) -ldflags '-L$(TOP)/$(LIB_DIR)'
instead of
$(MKLIB) -L$(TOP)/$(LIB_DIR)
to make sure the local library path appears before system's.
(cherry picked from commit 24137afb31)
Move system libraries (usually .so) out of --start-group / --end-group
pair. Add possiblly missing archives, defines, and shared libraries.
(cherry picked from commit 56ec8e17d3)
Considering fbdev as an in-kernel window system,
- opening a device opens a connection
- there is only one window: the framebuffer
- fb_var_screeninfo decides window position, size, and even color format
- there is no pixmap
Now EGL is built on top of this window system. So we should have
- the fd as the handle of the native display
- reject all but one native window: NULL
- no pixmap support
modeset support is still around, but it should be removed soon.
(cherry picked from commit aa281dd392)
Remove set_event_handler() and pass the event handler with
native_get_XXX_platform(). Add init_screen() so that the pipe screen is
created later. This way we don't need to pass user_data to
create_display().
(cherry picked from commit 73df31eedd)
Commit 1a339b6c(st/mesa: prefer native texture formats when possible)
introduced two new arguments to the st_choose_format() functions.
This patch fixes the order and passes the correct internal_target
rather than GL_NONE
NOTE: This is a candidate for the 7.11 branch
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 9b5c538726)
Blending and maybe even alpha-test don't work with those formats.
Only supporting RGBA, BGRA, RGBX, BGRX.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
(cherry picked from commit bc517d64da)
If we happened to allocate a texture result (or other vector) to the
highest hardware register slot, and we were in 16-wide, we would
under-count the registers used and potentially wrap around to g0 if
that allocation crossed a 16-register block boundary. Bad rendering
and hangs ensued.
Tested-by: Ian Romanick <idr@freedesktop.org>
When the fill mode is PIPE_POLYGON_MODE_LINE we were basically
converting the polygon into triangles, then drawing the outline of all
the triangles. But we really only want to draw the lines around the
perimeter of the polygon, not the interior lines.
NOTE: This is a candidate for the 7.10 branch.
In gen6 and above, clip distances 0-3 are written to message register
3's xyzw components, and 4-7 to message register 4's xyzw components.
Therefore when when writing the clip distances we need to examine the
lower 2 bits of the clip distance index to see which component to
write to.
emit_vertex_write() was examining the lower 3 bits, causing clip
distances 4-7 not to be written correctly.
Fixes piglit test vs-clip-vertex-01.shader_test
Evergreen+ don't support multi-writes so we need to emulate
it in the shader. Fixes the following piglit tests:
fbo-drawbuffers-fragcolor
ati_draw_buffers-arbfp-no-option
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
In intel_draw_buffer, there exists a workaround to prevent
_mesa_update_framebuffer from creating a swrast depth wrapper when
using separate stencil. This commit fixes the workaround, which was
incomplete for s8z24 texture renderbuffers.
Fixes fbo-blit-d24s8 on gen5 with separate stencil manually enabled.
Signed-off-by: Chad Versace <chad@chad-versace.us>
Since all infrastructure is now in place to support packed
depth/stencil renderbuffers when using separate stencil, there is no
need for special cases when separate stencil is enabled.
Signed-off-by: Chad Versace <chad@chad-versace.us>
Also, in order to coerce intel_update_tex_wrapper_regions() to
allocate the hiz region, alter intel_update_tex_wrapper_regions() to
examine the renderbuffer format instead of the texture image format.
Signed-off-by: Chad Versace <chad@chad-versace.us>
... and into new function intel_update_tex_wrapper_regions.
This prevents code duplication in the next commit.
Also add a note explaining that the hiz region is broken for mipmapped
depth textures.
Signed-off-by: Chad Versace <chad@chad-versace.us>
... when using separate stencil.
Define function intel_tex_image_x8z24_create_renderbuffers and call it
in intelTexImage after the miptree has been created and filled with data.
Signed-off-by: Chad Versace <chad@chad-versace.us>
... because they will be needed by intel_tex_image_s8z24_create_renderbuffers.
Redeclared functions are:
intel_alloc_renderbuffer_storage
intel_renderbuffer_set_draw_offsets
Signed-off-by: Chad Versace <chad@chad-versace.us>
Redeclare as non-static because
intel_tex_image_s8z24_create_renderbuffers will use it.
Remove the 'wrapper' parameter, because there is no wrapper for
intel_texture_image.depth_rb and stencil_rb.
Signed-off-by: Chad Versace <chad@chad-versace.us>
Add the fields depth_rb and stencil_rb, and put hooks in place to
release the renderbuffers in intelFreeTextureImageData and
intelTexImage.
Signed-off-by: Chad Versace <chad@chad-versace.us>
