This might fix a hang on Navi14.
Cc: 19.2 19.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
PIPE_CAP_MAX_VERTEX_BUFFERS already sets the maximum vertex_buffer_index.
There's no need to error on num_elements == 0 (if that can even happen).
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Fixes:
dEQP-GLES3.functional.instanced.*
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Fixes:
dEQP-GLES3.functional.draw.draw_arrays_instanced.*
dEQP-GLES3.functional.draw.draw_elements_instanced.*
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Sometimes using user buffer (not VBO) e.g. glVertexPointer
one thread could free memory before other thread used it.
Instead of copying this memory to driver simplier thing is
to block until draw finish.
Reviewed-by: Jan Zielinski <jan.zielinski@intel.com>
Buffer object and temporary texture were never freed, causing memory leaks.
Signed-off-by: Yevhenii Kolesnikov <yevhenii.kolesnikov@globallogic.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Only the blocks that are reachable are inserted with an end_nop
instruction at the end.
When handling the Phi second pass, if the Phi has a parent block that
does not have an end_nop then it means this block is unreachable, and
thus we can ignore it, as the Phi will never come through it.
Fixes dEQP-VK.graphicsfuzz.uninit-element-cast-in-loop.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
e5167a9276 disabled SDMA for gfx8.
This caused 3 piglit arb_sparse_buffer tests (basic, buffer-data
and commit) to crash on GFX8.
Reported-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Fixes: e5167a9276 ("radeonsi: disable SDMA on gfx8 to fix corruption on RX 580")
radv_fill_shader_info() already does that.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
From issue 10 of the OES_EGL_image_external_essl3:
A limited set of use-cases is enabled by making glBindImageTexture
accept external textures. Shaders can access such external textures
using the existing <image2D> sampler type.
Fixes: 02a6d901ee ("mesa: add OES_EGL_image_external_essl3 support")
Signed-off-by: Yevhenii Kolesnikov <yevhenii.kolesnikov@globallogic.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Our barrier instruction does not implicitly do a memory fence but the
GLSL barrier() intrinsic is supposed to. The easiest back-portable
solution is to just add the NIR barriers. We'll sort this out more
properly in later commits.
Cc: mesa-stable@lists.freedesktop.orgCloses: #2138
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Fixes a hang on Raven with Resident Evil 2.
I did not find anything more restricted to fix it:
- Setting persistent_states_per_bin to 1 fixes it too,
but likely does an internal break on any descriptor set changes
too.
- Only breaking the batch when cb_target_mask changes does not fix
it (and looking at AMDVLK comments, I suspect the code in radeonsi
should really be doing a FLUSH_DFSM).
- Always doing a FLUSH_DFSM on shader switch helps, but that is more
often than this and I don't think we should be doing that when DFSM
is disabled.
- Also emitting the existing break on framebuffer change when DFSM is
disabled does not fix the issue.
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2315
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
They're not available for Debian buster yet, so we have to use upstream
snapshot packages again.
In contrast to earlier, we now store the LLVM APT repository key in Git
instead of re-downloading it every time.
We need to mindful that we don't clobber the shadow comparator.
Fixes dEQP-GLES3.functional.shaders.texture_functions.texture.sampler2darrayshadow_*
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
The hardware separates face selection and array indexing, it looks like,
whereas Gallium smushes them together with some modulus fun. Let's fix
it so mipmapped 2D arrays work without regressing cubemaps.
Fixes dEQP-GLES3.functional.texture.filtering.2d_array.* among others.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
This is adapted from the GLSL IR code but doesn't need to
iterate over the IR. I believe this also fixes a potential bug in
the GLSL IR code which potentially counts the same output twice.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
This will allow us to do some linking in NIR that was previously
done by the GLSL IR linker. To start with this just has calls for
linking atomics.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
This is pretty much a copy of link_check_atomic_counter_resources()
updated to work with the NIR linker.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
A NIR based glsl linking function will be too different to the
spirv version to bother attempting any sharing. So lets change
the name to be explicit.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
The gl_nir_lower_buffers pass relies on recognizing the same literal
constants as the GLSL compiler so that constant buffer array indices
are constant in nir as well. Without this, get_block_array_index()
would see
vec1 32 ssa_723 = deref_var &const_temp@1 (function_temp int)
vec1 32 ssa_724 = load_const (0x00000001 /* 0.000000 */)
...
vec1 32 ssa_5 = deref_var &const_temp@1 (function_temp int)
vec1 32 ssa_6 = intrinsic load_deref (ssa_5) (0) /* access=0 */
vec1 32 ssa_7 = deref_var &blockB (ssbo BlockB[1])
vec1 32 ssa_8 = deref_array &(*ssa_7)[ssa_6] (ssbo BlockB) /* &blockB[ssa_6] */
instead of a literal 1, and ultimately generate the block name
BlockB[0]. That used to work, since we before the previous commits
we'd compact the block binding points and names. Thus, there would
always be a BlockB[0].
Now, if an entry in a block array isn't used, we don't generate that
block name, which means that if entry 0 isn't used BlockB[0] isn't
present and then get_block_array_index() fails to find the block.
In most cases we would have dealt with this in the call to
st_nir_opts() in st_nir_link_shaders(), but in the num_shaders == 1
case (for example, compute) we would call gl_nir_lower_buffers()
before we lowered GLSL constants. Move that corner case up next to
where we call st_nir_link_shaders() so we call st_nir_opts() at the
same point in the flow for all shaders.
Fixes: dEQP-GLES31.functional.ssbo.layout.random.all_per_block_buffers.18
Signed-off-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
When SSBO array is used with packed layout, both IR tree
and as a result, NIR tree will be incorrect.
In fact, the SSBO dereference indices won't
match the array size in some cases like the following:
"layout(packed, binding=1) buffer SSBO { vec4 a; } ssbo[3];
out vec4 color;
void main() {
color = ssbo[2].a;
}"
After linking the IR and then NIR will have an SSBO array
definition with size 1 but dereference still will have index 2
and linked_shader->Program->sh.ShaderStorageBlocks
will contain just SSBO with name "SSBO[2]"
So this line should be removed at least as a workaround for now
to avoid error like:
Failed to find the block by name "SSBO[0]"
Fixes: 810dde2a "glsl/nir: Add a pass to lower UBO and SSBO access"
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
This is needed to be in agreement with spec requirements:
https://github.com/KhronosGroup/OpenGL-API/issues/46
Piers Daniell:
"We discussed this in the OpenGL/ES working group meeting
and agreed that eliminating unused elements from the interface
block array is not desirable. There is no statement in the spec
that this takes place and it would be highly implementation
dependent if it happens. If the application has an "interface"
in the shader they need to match up with the API it would be
quite confusing to have the binding point get compacted.
So the answer is no, the binding points aren't affected by
unused elements in the interface block array."
v2: - 'original_dim_size' field moved above to keep
the struct packed better on 64-bit
- added a comment for 'total_num_array_elements' field
- fixed a binding point calculations for SSBOs array of arrays
( Ian Romanick <ian.d.romanick@intel.com> )
- fixed binding point calculations for non-packed SSBOs
v3:
- rename 'total_num_array_elements' to 'aoa_size'
( Jason Ekstrand <jason@jlekstrand.net> )
- rename 'boffset' to 'binding_stride'
( Alejandro Piñeiro <apinheiro@igalia.com> )
Fixes: 8cf1333b "glsl: link uniform block arrays of arrays"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109532
Reported-By: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Fritz Koenig <frkoenig@google.com>
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
This is needed to fix these tests:
piglit.spec.arb_shader_storage_buffer_object.compiler.unused-array-element_frag
piglit.spec.arb_shader_storage_buffer_object.compiler.unused-array-element_comp
Fixes: 8cf1333b "glsl: link uniform block arrays of arrays"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109532
Reported-By: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Fritz Koenig <frkoenig@google.com>
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Take one step towards sharing code between the LAVA and non-LAVA jobs,
with the goals of reducing maintenance burden and use of computational
resources.
The env var DEQP_NO_SAVE_RESULTS allows us to skip the procesing of the
XML result files, which can take a long time and is not useful in the
LAVA case as we are not uploading artifacts anywhere at the moment.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Same format code as UINT... might be different in how it's fed into a
shader but we'll deal with that when we get there.
Fixes dEQP-GLES3.functional.vertex_arrays.single_attribute.output_types.usigned_int2_10_10_10.components4_vec2_quads1
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
