Instead, we replace it directly with nir_def. We could replace it with
nir_dest but the next commit gets rid of that so this avoids unnecessary
churn. Most of this commit was generated by sed:
sed -i -e 's/dest.dest.ssa/def/g' src/**/*.h src/**/*.c src/**/*.cpp
There were a few manual fixups required in the nir_legacy.c and
nir_from_ssa.c as nir_legacy_reg and nir_parallel_copy_entry both have a
similar pattern.
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24674>
We could add a nir_def_num_components() helper but we use
ssa.num_components about 3x as often as nir_dest_num_components() today
so that's a major Coccinelle refactor anyway and this doesn't make it
much worse. Most of this commit was generated byt the following
semantic patch:
@@
expression D;
@@
<...
-nir_dest_num_components(D)
+D.ssa.num_components
...
Some manual fixup was needed, especially in cpp files where Coccinelle
tends to give up the moment it sees any interesting C++.
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24674>
We could add a nir_def_bit_size() helper but we use ->bit_size about 3x
as often as nir_dest_bit_size() today so that's a major Coccinelle
refactor anyway and this doesn't make it much worse. Most of this
commit was generated byt the following semantic patch:
@@
expression D;
@@
<...
-nir_dest_bit_size(D)
+D.ssa.bit_size
...
Some manual fixup was needed, especially in cpp files where Coccinelle
tends to give up the moment it sees any interesting C++.
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24674>
Nothing produces them any more, so remove them from NIR. This massively reduces
the size of nir_src, which should improve performance all over.
nir_src size reduced from 56 bytes -> 40 bytes (pahole results on arm64, x86_64
should be similar.)
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24253>
Note the writemask handling is chosen for consistency with the rest of NIR. In
every other instance, writemask=w requires a vec4 source. This is hardcoded into
nir_validate and nir_print as what it means to have a writemask.
More importantly, consistency with how register writemasks currently work.
nir_print hides it, but r0.w = fneg ssa_1.x is actually a vec4 instruction with
source ssa_1.xxxx. As a silly example nir_dest_num_components(that) = 4 in the
old model. I realize this is quite strange coming from a scalar ISA, but it's
perfectly natural for the class of vec4 hardware for which this was designed. In
that hardware, conceptually all instructions are vec4`, so the sequence "fneg
ssa_1 and write to channel w" is implemented as "fneg a vec4 with ssa_1.x in the
last component and write that vec4 out but mask to write only the w channel".
Isn't this inefficient? It can be. To save power, Midgard has scalar ALUs in
addition to vec4 ALUs. Those details are confined to the backend VLIW scheduler;
the instruction selection is still done as vec4. This mechanism has little in
common with AMD's SALUs. Midgard has a wave size of 1, with special hacks for
derivatives.
As a result, all backends consuming register writemasks are expecting this
pattern of code. Changing the store to take a vec1 instead of a vec4 would
require changing every backend to reswizzle the sources to resurrect the vec4. I
started typing a branch to do this yesterday, but it made a mess of both Midgard
and nir-to-tgsi. Without any good reason to think it'd actually help
performance, I abandoned the idea. Getting all 15 backends converted to the
helpers is enough of a challenge without forcing 10 backends to reswizzle their
sources too.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23089>
This frees up the shorter names for the intrinsic-based versions that will
replace them.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Acked-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23956>
We can't txf_ms on non-MS images and we can't txf on MS images. This would have
caught a regression on Asahi.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23892>
Done by hand at each call site but going very quickly with funny Vim motions and
common regexes. This is a very common idiom in NIR.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23807>
We duplicated the validation for unified vs legacy atomics, so drop the unused
latter set.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23036>
nir_validate checks that the format of an atomic (if specified) is compatible
with the atomic operation. For example, we can't fadd R64_UINT texels. The logic
can't be extended as-is to unified atomics because it's split across different
switch cases for different atomic-op intrinsics. So we add our own validation
case, porting over the logic from the separate existing cases below.
(The redundant logic will be deleted once we delete legacy atomics.)
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22914>
The pattern shows up all the time open-coded. Use the macro instead.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22967>
If we know the next stage, we can tell whether an output is a sysval,
such as POS.
For example, POS is not a sysval output if the next stage is not FS.
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21861>
We don't use the tag anywhere, so don't bother with it.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Suggested-by: Faith Ekstrand <faith@gfxstrand.net>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22343>
Every nir_ssa_def is part of a chain of uses, implemented with doubly linked
lists. That means each requires 2 * 64-bit = 16 bytes per def, which is
memory intensive. Together they require 32 bytes per def. Not cool.
To cut that memory use in half, we can combine the two linked lists into a
single use list that contains both regular instruction uses and if-uses. To do
this, we augment the nir_src with a boolean "is_if", and reimplement the
abstract if-uses operations on top of that list. That boolean should fit into
the padding already in nir_src so should not actually affect memory use, and in
the future we sneak it into the bottom bit of a pointer.
However, this creates a new inefficiency: now iterating over regular uses
separate from if-uses is (nominally) more expensive. It turns out virtually
every caller of nir_foreach_if_use(_safe) also calls nir_foreach_use(_safe)
immediately before, so we rewrite most of the callers to instead call a new
single `nir_foreach_use_including_if(_safe)` which predicates the logic based on
`src->is_if`. This should mitigate the performance difference.
There's a bit of churn, but this is largely a mechanical set of changes.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22343>
4d802df3aa loosened the type restrictions
on these opcodes to enable support for 64-bit ballot operations. In
doing so, it enabled 8-bit and 16-bit sizes as well.
It's impossible to get these sizes through GLSL or SPIR-V. None of the
lowering in nir_opt_algebraic can handle non-32-bit sizes. Almost no
drivers can handle non-32-bit sizes.
It doesn't seem possible to enforce anything other than "one bit size"
or "all bit sizes" in nir_opcodes.py. The only way it seems possible to
enforce this is in nir_validate. This is not ideal, but it be what it
be.
v2: Remove restriction on find_lsb. It is acutally possible to get this
via GLSL by doing findLSB() on a lowp value. findMSB declares its
parameter as highp, so that path is still impossible.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19042>
Add a new texture opcode that returns the LOD bias of the sampler. This will be
used on AGX to lower sampler LOD bias to txb and friends. This needs to be a
texture op (and not a new intrinsic) to handle both bindless and bindful
samplers across GL and Vulkan in a uniform way.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Acked-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21276>
The added continue_list corresponds to the SPIR-V
Continue Construct and serves as a converged control-flow
construct and is executed after each continue statement
and before the next iteration of the loop body.
Also adds validation rules for loops with Continue Construct
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13962>
In general we should only call it once, and then we should avoid to
call any lowering that introduce back copies. So far we were tracking
that manually out of the nir shader on several places.
Ideally we would like to add a nir_validate rule, but right now there
are some exceptions to this rule. For example right now the Intel
compiler calls nir_lower_io_to_temporaries as part of linking
tess_ctrl/mesh/task sahders.
One option would be to allow drivers to reset the value, but for now
let's not add that validation rule.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19338>
validate_ssa_def_dominance() asserts :
validate_assert(state, !BITSET_TEST(state->ssa_defs_found, def->index));
Because the previous validation lefts bits set when it processed the
IR.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18966>
this adds minimal validation for tex ops with derefs to check that the
dest type integer-ness matches the sampled type's integer-ness
the aim is to provide the most basic validation that nir is being modified
and created consistently, not to perform exact verification that
the types are identical
fix#6985
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17874>
We want to be able to carry this along with the shader instead of always
having to re-generate it from scratch. A new nir_gather_xfb_info()
helper is also added which, instead of returning it, adds it to the
shader.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16750>
These are functions that run before the entrypoint at least once per
draw and write their results via store_preamble, and then are loaded in
the rest of the shader via load_preamble.
We will add users in the following commits.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13148>
This is for drivers that have separate store instructions for varyings,
system value outputs (such as clip distances), and transform feedback.
The flags tell the driver not to store the output to those locations.
This will be used by radeonsi initially, and then maybe by a new linker.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14388>
This will allow compaction of transform feedback varyings because they
are no longer tied to varying slots with this information.
It will also make transform feedback info available to all NIR passes
after IO is lowered. It's meant to replace pipe_stream_output_info.
Other intrinsics are not used with transform feedback.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14388>
Task shader outputs work differently than other shaders, so they
need special consideration. Essentially, they have two kinds of
outputs:
1. Number of mesh shader workgroups to launch.
Will be still represented by a shader output.
2. Optional payload of up to (at least) 16K bytes.
These payload variables behave similarly to shared memory, but
the spec doesn't actually define them as shared memory (also, they
may be implemented differently by each backend), so we need to add
a new NIR variable mode for them.
These payload variables can't be represented by shader outputs
because the 16K bytes don't fit the 32x vec4 model that NIR uses
for its output variables.
This patch adds a new NIR variable mode: nir_var_mem_task_payload
and corresponding explicit I/O intrinsics, as well as support for
this new mode in nir_lower_io.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14930>
