This is allowed by the specification, as the following VUIDs state:
VUID-vkCmdResolveImage-srcImage-04446
If dstImage is of type VK_IMAGE_TYPE_3D, then for each element of
pRegions, srcSubresource.layerCount must be 1
VUID-vkCmdResolveImage-srcImage-04447
If dstImage is of type VK_IMAGE_TYPE_3D, then for each element of
pRegions, dstSubresource.baseArrayLayer must be 0 and
dstSubresource.layerCount must be 1
New tests coming for it: dEQP-VK.pipeline.*.multisample.3d.*
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36895>
We don't go through the loop when there are no queues.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 884df891d7 ("anv: allow device creation with no queue")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36910>
Instead of being encoded as a contiguous 64-bit mask of individual registers,
the robustness information is now encoded as a vector of up to 4 bytes that
represent the limits of each of the pushed UBO ranges in 16 byte units.
Some buggy Direct3D workloads are known to depend on a robustness alignment
as low as 16 bytes to work properly.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36455>
wsi_common_vk_instance_supports_present_wait returns true for all
supported wsi platforms here, so we can unconditionally advertise them
behind ANV_USE_WSI_PLATFORM like the other wsi extensions (also to not
tangle with Android).
v2: guard presentId2 and presentWait2 features as well
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> (v1)
Acked-by: Daniel Stone <daniels@collabora.com> (v1)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36835>
wsi_common_vk_instance_supports_present_wait returns true for all
supported wsi platforms here, so we can unconditionally advertise them
behind ANV_USE_WSI_PLATFORM like the other wsi extensions (also to not
tangle with Android).
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36835>
We can just place the set structures inside nir_block.
This reduces the number of ralloc calls by 6.7% when compiling Heaven
shaders with radeonsi+ACO using a release build (i.e. not including
nir_validate set allocations, which are also removed).
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36728>
We were not implementing vkGetImageOpaqueCaptureDescriptorDataEXT,
relying on the common implementation that does nothing. That works well
enough for regular images because the fixed address needed for
capture/replay is handled by the memory allocation path, but for sparse
images we initialize the sparse bindings at image creation time.
Here we implement the function to retrieve the addresses of all the
used bindings for the image, then use all of them at creation time.
Also, set the correct alloc_flags for this to work.
Fixes: 43b57ee8a5 ("anv: add capture/replay support for image with descriptor buffers")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35872>
In case of emulated ASTC on supported platforms, currently returning
0 for linear tiled images causes vpGetPhysicalDeviceProfileSupport
failure during AndroidBaselineProfile test. The patch handles it
similar to linearly-tiled images that are used for transfers.
Fixes android.graphics.cts.VulkanFeaturesTest#testAndroidBaselineProfile2021Support.
Cc: mesa-stable
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36798>
Unfortunately we cannot use the indirect descriptor on Gfx11, it
appears to just drop writes. Other platforms appear to be fine.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36883>
The problem with the current flag is that it seems to belong to
VkShaderCreateFlagsEXT, not VkPipelineShaderStageCreateFlagBits.
Also it is completely skipped by the vk_pipeline.c code.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 7b634ebb63 ("vulkan/runtime: Add VK_SHADER_CREATE_UNALIGNED_DISPATCH_BIT_MESA flag")
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36828>
The nightly jobs can hit OOMs on JSL and ADL, so reduce the number of
threads used by deqp-runner to avoid that.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36608>
Usually JIP will be valid, but as part of other changes, it will be
possible to have a shader that have multiple EOT messages and end with
and ENDIF instruction. Its JIP will point after the program ends.
This is fine but was tripping up the compaction code.
Change compaction to not read its internal structures beyond the last
instruction.
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36822>
Move it before the new source is used. This currently works because all
instructions have a minimum amount of sources allocated, but a later commit
will change that.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36817>
Everything is currently using CLOCK_BOOTTIME, which is perfetto's
default, and matches the previous behavior. On some hardware, different
clocks may be better synchronized with the gpu clock.
Signed-off-by: Olivia Lee <olivia.lee@collabora.com>
Reviewed-by: Eric R. Smith <eric.smith@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34390>
Now that we require the dma-buf sync file import/export path, these
legacy paths should never be invoked so we can stop requesting them.
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36783>
This also implies all the other syncobj features we care about so those
become dead code. We'll delete them in following commits.
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36783>
i915 has had support for timeline syncobjs for a long time. We might as
well require it at this point.
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36783>
This feature is almost as old as the Vulkan driver itself. We've
required newer kernels for a long time. There's no point in having this
feature bit kicking around.
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36783>
This feature is as old as the Vulkan driver itself. We've required
newer kernels for a long time. There's no point in having this feature
bit kicking around.
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36783>
Now that we require the dma-buf sync file import/export path, these
legacy paths should never be invoked so we can stop requesting them.
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36783>
This also implies all the other syncobj features we care about so those
become dead code. We'll delete them in following commits.
We don't need a check for Xe because the Xe driver was merged into Linux
6.8 while dma-buf sync file import/export landed in 6.0.
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36783>
i915 has had support for timeline syncobjs for a long time. We might as
well require it at this point.
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36783>
This feature is almost as old as the Vulkan driver itself. We've
required newer kernels for a long time. There's no point in having this
feature bit kicking around.
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36783>
This feature is as old as the Vulkan driver itself. We've required
newer kernels for a long time. There's no point in having this feature
bit kicking around.
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36783>
Otherwise the SPIR-V parser prints a warning the first time the driver
is loaded after a fresh compile.
Fixes: 91b62e9868 ("anv: Use spirv_capabilities for the float64 shader")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36783>
Calling vkCmdBindDescriptorBuffersEXT() does not invalidate previously
set descriptor sets. Move the state dirtying to
vkCmdSetDescriptorBufferOffets.
Fixes: ab7641b8dc ("anv: implement descriptor buffer binding")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36768>
