We need to access the pipeline layout to compute correct dynamic
offsets for dyamic UBO/SSBO descriptors when we emit draw commands.
Instead of taking it from the pipeline object, store the layout
in the command buffer pipeline state.
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
While we're here, make it an anv_address.
Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
The Vulkan spec says:
"pipelineBindPoint is a VkPipelineBindPoint indicating whether the
descriptors will be used by graphics pipelines or compute pipelines.
There is a separate set of bind points for each of graphics and
compute, so binding one does not disturb the other."
Up until now, we've been ignoring the pipeline bind point and had just
one bind point for everything. This commit separates things out into
separate bind points.
Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102897
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Initially, these just contain the pipeline in a base struct.
Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
There are several places where we'd already saved the pipeline off to a
temporary variable but, due to an artifact of history, weren't actually
using that temporary everywhere. No functional change.
Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
After executing a secondary command buffer, we need to update certain
state on the primary command buffer to reflect changes by the secondary.
Otherwise subsequent commands may not have the correct state set.
This fixes various issues (rendering errors, GPU hangs) seen after
executing secondary command buffers in some cases.
v2 (Jason Ekstrand):
- Reset to invalid values instead of pulling from the secondary
- Change the comment to be more descriptive
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: mesa-stable@lists.freedesktop.org
Apparently, Geminilake requires you to whack a chicken bit to select
either compute or tessellation mode for barriers. The recommendation
is to switch between them at PIPELINE_SELECT time.
We may not need to do this all the time, but I don't know that it hurts
either. PIPELINE_SELECT is already a pretty giant stall.
This appears to fix hangs in tessellation control shaders with barriers
on Geminilake. Note that this requires a corresponding kernel change,
drm/i915: Whitelist SLICE_COMMON_ECO_CHICKEN1 on Geminilake.
in order for the register write to actually happen. Without an updated
kernel, this register write will be noop'd and the fix will not work.
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
This was never enabled in secondary buffers because hiz_enabled was
never set to true for those.
If the app provides a framebuffer in the inheritance info when beginning
a secondary buffer, we can determine if HiZ is enabled and therefore
allow the PMA optimization to be enabled within the command buffer.
This improves performance by ~13% on an internal benchmark on Skylake.
v2: Use anv_cmd_buffer_get_depth_stencil_view().
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
In order to do this we have to modify push constant set up to handle
ranges. We also have to tweak the way we handle dirty bits a bit so
that we re-push whenever a descriptor set changes.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
There are several places where we look up opcodes in an array of stages.
Assert that the we don't end up going out-of-bounds.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
While we're at it, we break it into two nicely named functions.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Otherwise, if the image is not bound to the start of the buffer, we're
going to be reading and writing its fast clear state in the wrong spot.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
I saw VK_IMAGE_ASPECT_ANY_COLOR_BIT while hacking anv_formats.c and got
confused. "Huh? What extension added that?". No extension defines it;
anv_private.h defines it.
To remove confusion, rename the anv-private VK tokens as if they were
extension tokens with the ANV vendor suffix.
I found only two such tokens:
VK_IMAGE_ASPECT_ANY_COLOR_BIT
VK_IMAGE_ASPECT_PLANES_BITS
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
In src/intel/vulkan/*, redirect all instances of printf, vk_error,
anv_loge, anv_debug, anv_finishme, anv_perf_warn, anv_assert, and their
many variants to the new intel_log functions. I believe I caught them
all.
The other subdirs of src/intel are left for a future exercise.
v2:
- Rebase onto Tapani's VK_EXT_debug_report changes.
- Drop unused #include <cutils/log.h>.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This change introduce the concept of planes for image & views. It
matches the planes available in new formats.
We also refactor depth & stencil support through the usage of planes
for the sake of uniformity. In the backend (genX_cmd_buffer.c) we have
to take some care though with regard to auxilliary surfaces.
Multiplanar color buffers can have multiple auxilliary surfaces but
depth & stencil share the same HiZ one (only store in the depth
plane).
v2: by Jason
Remove unused aspect parameters from anv_blorp.c
Assert when attempting to resolve YUV images
Drop redundant logic for plane offset in make_surface()
Rework anv_foreach_plane_aspect_bit()
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
New settings from the KHR_sampler_ycbcr_conversion specifications
might require different sampler settings for luma and chroma planes.
This change makes the sampler table emission ready to handle multiple
planes.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
In order to get support everywhere, this gets a bit complicated. On Sky
Lake and later, everything is fine because HALIGN/VALIGN are specified
in surface elements and are required to be at least 4 so any offsetting
we may need to do falls neatly within the heavy restrictions placed on
the X/Y Offset parameter of RENDER_SURFACE_STATE. On Broadwell and
earlier, HALIGN/VALIGN are specified in pixels and are hard-coded to
align to exactly the block size of the compressed texture. This means
that, when reinterpreted as a non-compressed texture, the tile offsets
may be anything and we can't rely on X/Y Offset.
In order to work around this issue, we fall back to linear where we can
trivially offset to whatever element we so choose. However, since
linear texturing performance is terrible, we create a tiled shadow copy
of the image to use for texturing. Whenever the user does a layout
transition from anything to SHADER_READ_ONLY_OPTIMAL, we use blorp to
copy the contents of the texture from the linear copy to the tiled
shadow copy. This assumes that the client will use the image far more
for texturing than as a storage image or render target.
Even though we don't need the shadow copy on Sky Lake, we implement it
this way first to make testing easier. Due to the hardware restriction
that ASTC must not be linear, ASTC does not work yet.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This struct represents a full surface state including the addresses of
the referenced main and auxiliary surfaces (if any). This makes
relocation setup substantially simpler and allows us to move 100% of the
surface state setup logic into anv_image where it belongs. Before, we
were manually fishing data out of surface states when emitting
relocations so we knew how to offset aux address. It's best to keep all
of the surface state emit logic together. This also gets us closer, at
least cosmetically, to a world of no relocations where addresses are
placed in surface states up-front.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This gives us a single centralized place where we take an image view and
use it to fill out a surface state.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The functions we're marking as UNUSED in genX_pipeline.c are used only
when compiling for particular generations.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Image layouts only let us know that an image *may* be fast-cleared. For
this reason we can end up with redundant resolves. Testing has shown
that such resolves can measurably hurt performance and that predicating
them can avoid the penalty.
v2:
- Introduce additional resolve state management function (Jason Ekstrand).
- Enable easy retrieval of fast clear state fields.
v3: Use more descriptive field enums (Jason)
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2: Expound on comment for the pipe controls (Jason Ekstrand).
v3:
- Cast base_layer to uint64_t to avoid overflow.
- Remove "seems" from the pipe control comment.
- Fix clamp of layer_count (Jason Ekstrand).
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Use the performance warning infrastructure to provide helpful
information when testing applications.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
For readability, bring the assignment of CCS closer to the assignment of
NONE and MCS.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The lifespan of the fast-clear data will surpass the render pass scope.
We need CCS_D to be enabled in order to invalidate blocks previously
marked as cleared and to sample cleared data correctly.
v2: Avoid refactoring.
v3: Allow CCS_D for subpass resolves.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The next patch enables the use of CCS_D even when the color attachment
will not be fast-cleared. Catch the gen7 case early to simplify the
changes required.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2: Remove ::first_subpass_layout assertion (Jason Ekstrand).
v3: Allow some fast clears in the GENERAL layout.
v4: Remove extra '||' and adjust line break (Jason Ekstrand).
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2: Don't pass in the command buffer (Jason Ekstrand).
v3: Remove an incorrect assertion and an if condition for gen7.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We were early returning and never created the NULL surface state.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: James Legg <jlegg@feralinteractive.com>
Cc: mesa-stable@lists.freedesktop.org
A GPU memcpy function could alternatively be implemented using MI_*
commands. Provide more detail into how this one operates in case another
memcpy function is created.
v2:
- Update the commit message.
v3:
- Use 'memcpy' instead of 'cpy' (Jason Ekstrand)
- Shorten 'streamout' to 'so'
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> (v2)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Splitting out these fields will make the color buffer transitioning
function simpler when it gains more features.
v2: Remove unintended blank line (Iago Toral)
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Make the function take in an image instead of an image view. This
enables us to record relocations for surfaces states created outside of
the anv_CreateImageView path.
v2 (Jason Ekstrand):
- Use image->offset instead of surf_offset in aux_offset calculation.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
