The execution units of XeHP platforms have multiple asynchronous ALU
pipelines instead of (as far as software is concerned) the single
in-order pipeline that handled most ALU instructions except for
extended math in the original Xe. It's now the compiler's
responsibility to identify cross-pipeline dependencies and insert
synchronization annotations whenever necessary, which are encoded as
some additional bits of the SWSB instruction field.
This commit represents the cross-pipeline synchronization annotations
as part of the existing tgl_swsb structure used for codegen. The
existing tgl_swsb_*() helpers used by hand-crafted assembly are
extended to default to TGL_PIPE_ALL big-hammer synchronization in
order to ensure backwards compatibility with the existing assembly.
The following commits will extend the software scoreboard lowering
pass in order to keep track of cross-pipeline dependencies across IR
instructions, and insert more specific pipeline annotations in the
SWSB field.
The disassembler is also extended here to print out any existing
pipeline sync annotations.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10000>
One exception is src/amd/addrlib/, for which -Wimplicit-fallthrough is
explicitly disabled.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10220>
The messages for those 16-bit operations still use 32-bit sources and
destinations, so expand them accordingly when building the payload.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8750>
The code works but is a bit fragile if we ever add a case that has a
less strict requirement (a smaller gen) than the case above. To avoid
having to reason about this, refactor code to use a variable to
indicate whether the SFID is supported or not.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7742>
Shader instructions which use UIP/JIP now get formatted with a label
in addition with immediate value, labels have "LABEL%d" format.
v2: - Consider brw_jump_scale when calculating label's offset
From: "Lonnberg, Toni" <toni.lonnberg@intel.com>
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4245>
Using HALT to immediately jump to the end of the shader is required to
implement GL_EXT_gpu_shader4 and OpenGL 3.0. However, vanilla OpenGL
1.2 doesn't forbid it and it likely makes something somewhere faster.
We should be consistent and implement the same discard behavior on all
hardware if we can.
The rules for HALT on Gen4-5 are a bit different from Gen6+. On the
older hardware, there is no stack for HALT; instead it's up to software
to save and restore mask registers. However, there's no real saving
needed since we only use HALT to jump to the end of the program where
we're about about to do our FB writes. All we need to do is reset AMask
to DMask, the value it was initialized to at the start of the thread.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5244>
The interpretation of the fields is different depending whether the
instruction is a SEND/MATH or not.
This fixes the disassembly output for non-SEND/MATH instructions that
have both in-order and out-of-order dependencies. Their dependencies
were wrongly represented as `@A $B` when the correct would be `@A
$B.dst`.
Fixes: 6154cdf924 ("intel/eu/gen12: Add auxiliary type to represent SWSB information during codegen.")
Fixes: 83612c0127 ("intel/disasm/gen12: Disassemble software scoreboard information.")
Acked-by: Francisco Jerez <currojerez@riseup.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3660>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3660>
Instead of emitting g[a0]UD for the indirect descriptor, emit a0<0>UD.
This is more correct because there is no GRF involved.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3547>
Since the platforms don't support align1 3-src instructions, the
contents of these operands are not going to be meaningful. Just don't
print them to avoid hitting some assertions in brw_inst functions.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2635>
The brw_inst opcode accessors are going away in one of the following
commits. We could potentially replace them with the new helpers that
do opcode remapping, but that would lead to a circular dependency
between brw_inst.h and brw_eu.h. This way we also avoid ordering
issues that can cause the semantics of the ex_desc accessors to change
depending on whether the ex_desc field is set after or before the
opcode instruction field.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
On haswell, for dim instruction we encode immediate float value operand
into double float,
v2: Fix comment (Matt Turner)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Print quad value same as unsigned quad so that we can distinguish in
between quater control disassembled values for e.g 1/2/3[Q] and
immediate quad value for e.g 1Q. This allows round-tripping through the
assembler/disassembler.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Instead of fetching the information out of the instruction directly,
fetch the descriptor and then pluck the information out of the
descriptor. The current scheme works ok for SEND but with SENDS, it all
falls to pieces because the descriptor is completely shuffled around.
This commit doesn't actually convert everything. One notable exception
is URB messages which don't even use descriptors in emit_urb_WRITE yet.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
While disassembling the predicate always print flag subregister number
to keep grammar same across the generation for assembler tool.
v2: Combine consecutive format calls (Matt Turner)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Both BRW_SFID_SAMPLER and GEN6_SFID_DATAPORT_SAMPLER_CACHE are getting
disassembled as "sampler", which is misleading for assembler tool.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
While disassembling send(c) instruction print message descriptor as
immediate source operand along with message descriptor. This allows
assembler to read immediate source operand and set bits accordingly.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
While encoding the immediate floating point values in instruction we use
values upto precision 9, but while disassembling, we print precision to
6 places, which round up the value and gives wrong interpretation for
encoded immediate constant.
To avoid misinterpretation of encoded immediate values in instruction
and disassembled output, print hex representation along with floating
point value which can be used by assembler in future.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
v2: Split changes to the message type field to another patch. Suggested
by Caio.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This is necessary for a new Gen9 message type that will be added in the
next patch. There are also Gen8 message types that need the extra bit
(mostly for bindless).
v2: Split off from the next patch. Suggested by Caio.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
v2 (idr): Don't allow CSEL with a non-float src2.
v3 (idr): Add CSEL to fs_inst::flags_written. Suggested by Matt.
v4 (idr): Only set BRW_ALIGN_16 on Gen < 10 (suggested by Matt). Don't
reset the access mode afterwards (suggested by Samuel and Matt). Add
support for CSEL not modifying the flags to more places (requested by
Matt).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> [v3]
Reviewed-by: Matt Turner <mattst88@gmail.com>
This new type exposes the additional precision offered by the
accumulator register and will be used in the next patch to implement the
functionality of the PLN instruction using a pair of MAD instructions.
One weird thing to note: align1 ternary instructions may only have an
accumulator in the dst or src1 normally, but when src0's type is :NF
the accumulator is read.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fix the following:
warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but
argument 3 has type ‘uint64_t {aka long long unsigned int}.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Put hw_ in the name so that it's clear these are the hardware encodings.
Similar to commit 9fb8323328 ("i965: Rename brw_inst's functions that
access the register type")
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
The instruction word contains SubRegNum[4:2] so it's in units of dwords
(hence the * 4 to get it in terms of bytes). Before this patch, the
subreg would have been wrong for DF arguments.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
The type suffixes were wrong, and the 16 was missing the 0 prefix.
Fixes: 92f787ff86 ("i965: Add support for disassembling 64-bit integer immediates")
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
