Not using it yet, that will be done in the next patch.
Xe only supports submission using VM.
For i915 the backend functions are just a noop.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21698>
Wa_1409600907 was enabled for gen12+. It should not be applied for
platforms after gen12.0. Use generated helpers to ensure application
to all relevant platforms.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21743>
The HW can technically execute 16-bit operations, but the restrictions on
16-bit ALU ops are so great that it ends up not being a win for
GLES-on-Vulkan to lower mediump to 16-bit operations, at least with the
current state of the Intel compiler. This brings zink-on-anv in line with
iris and angle-on-anv for mediump behavior (ANGLE uses RelaxedPrecision,
which we ignore).
Perf on some angle traces on my brya (ADL) and i9-9900K (CFL):
ADL zink pubg_mobile_battle_royale: +13.4574% +/- 5.2046% (n=5)
CFL zink pubg_mobile_battle_royale: +29.5332% +/- 0.646585% (n=6)
ADL zink aztec_ruins_high: +5.78027% +/- 4.80645% (n=4)
CFL zink aztec_ruins_high: -1.10641% +/- 0.140562% (n=12)
ADL zink trex_200: +5.86956% +/- 2.09633% (n=10)
CFL zink trex_200: +9.72136% +/- 0.749261% (n=10)
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21775>
Seems to fix a hang in the following titles :
- Age of Empire 4
- Monster Hunter Rise
where the HW is hung on a PIPE_CONTROL after a GPGPU_WALKER but no
MEDIA_INTERFACE_DESCRIPTOR_LOAD was emitted since the switch from 3D
to GPGPU.
This would happen in the following case :
vkCmdBindPipeline(COMPUTE, cs_pipeline);
vkCmdDispatch(...);
vkCmdBindPipeline(GRAPHICS, gfx_pipeline);
vkCmdDraw(...);
vkCmdDispatch(...);
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17247>
I don't see any code calling this, but with multiple gens, the symbol
name would conflict.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21670>
The indirect draw count shader can be used as a more generic case of
the indirect draw one. We'll never enter the last condition of the
shader (writing the MI_BATCH_BUFFER_START) with non count variants of
draws.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20497>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: e2dc32d755 ("anv: move functions around to plan for generated draws")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20497>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: e2dc32d755 ("anv: move functions around to plan for generated draws")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20497>
We have to use the helper and also were missing the vector mask
programming.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: c950fe97a0 ("anv: implement generated (indexed) indirect draws")
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20497>
With softpin we should not always expect a BO in addresses.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20497>
We only use the fragment shader push constants.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: c950fe97a0 ("anv: implement generated (indexed) indirect draws")
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20497>
Earlier versions of the generation shaders were using the binding
table. We since switch to A64 messages. So the flush can be removed.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: c950fe97a0 ("anv: implement generated (indexed) indirect draws")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20497>
The issue here is that for draw indirect count variants, we want to
jump after the last generated draw call to the next location where
commands are. But if we have more than 67M draws (8k * 8k chunks), we
only know the location once we've generated each of the 8k * 8k
chunks.
This change adds a CPU side pointer in the push constant struct so
that we can create a single linked list of chunks to edit and go
through to write the correct jump address after all the generated
space has been allocated.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: c950fe97a0 ("anv: implement generated (indexed) indirect draws")
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20497>
cmd_buffer_update_dirty_vbs_for_gfx8_vb_flush takes a value RANDOM/SEQUENTIAL. Not a boolean.
Fortunately this worked okay because true == RANDOM
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20497>
The WA is meant to be here to apply some state that is not propagated
properly inside the HW. But if you have a loop like :
for ( ... ) {
emit(3DPRIMITIVE, some param);
}
You're not really changing any state, just push more draws into the
pipeline.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: f2645229c2 ("anv: implement Wa_14016118574")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21660>
We don't want the WA to kick-in if it's not point/line topology.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: f2645229c2 ("anv: implement Wa_14016118574")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21660>
We need to have the scratch buffer added to the pipeline BO tracking
list, so it's added to the batch buffer and finally to the execbuffer
list. Otherwise we pagefault (or read the default scratch page on
i915).
Fixes
dEQP-VK.subgroups.ballot_broadcast.graphics.subgroupbroadcast_u16vec4
on CI (and probably other tests).
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 2028f1caa3 ("anv: emit 3DSTATE_HS in cmd_buffer_flush_gfx_state")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21653>