In the first pass of implementing exact handling, I made a mistake with
search-and-replace. In particular, we only reallly handled exact/inexact
on the root of the tree. Instead, we need to check every node in the tree
for an exact/inexact match. As an example of this, consider the following
GLSL code
precise float a = b + c;
if (a < 0) {
do_stuff();
}
In that case, only the add will be declared "exact" and an expression that
looks for "b + c < 0" will still match and replace it with "b < -c" which
may yield different results. The solution is to simply bail if any of the
values are exact when matching an inexact expression.
This function differs from the open-coded implementation in that the
ImageView's width is determined by the caller and is not unconditionally
set to match the number of texels within the surface's pitch.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This is required to create multiple, horizontally adjacent, max-width
images from one blit2d surface. This is also required for more accurate
width specification of surfaces within a larger surface (which is seen
as the smaller surface's enclosing region).
Note that anv_image_create_info::stride has been unused since commit,
b369389640 .
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The programming of the L3 Cache registers should match the previous
manually packed LRI values.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Prepare Image extents and offsets for internal consumption by assigning
the default values implicitly defned by the spec. Fixes textures on
several Vulkan demos in which the VkImageCopy depth is set to zero when
copying a 2D image.
v2 (Jason Ekstrand):
Replace "prep" with "sanitize"
Make function static inline
Pass structs instead of pointers
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
This commit adds a NIR pass for lowering away returns in functions. If the
return is in a loop, it is lowered to a break. If it is not in a loop,
it's lowered away by moving/deleting code as needed.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This can happen if a function ends in a return instruction and you remove
the return.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
The efficiency should be approximately the same. We do a little more work
per phi node because we have to sort the predecessors. However, we no
longer have to walk the blocks a second time to pop things off the stack.
The bigger advantage, however, is that we can now re-use the phi placement
and per-block SSA value tracking in other passes.
As a side-benifit, the phi builder actually handles unreachable blocks
correctly. The original vars_to_ssa code, because of the way it iterated
the blocks and added phi sources, didn't add sources corresponding to
predecessors of unreachable blocks. The new strategy employed by the phi
builder creates a phi source for each predecessor and should correctly
handle unreachable blocks by setting those sources to SSA undefs.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Previously, nir_dominance.c didn't properly handle unreachable blocks.
This can happen if, for instance, you have something like this:
loop {
if (...) {
break;
} else {
break;
}
}
In this case, the block right after the if statement will be unreachable.
This commit makes two changes to handle this. First, it removes an assert
and allows block->imm_dom to be null if the block is unreachable. Second,
it properly skips unreachable blocks in calc_dom_frontier_cb.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Right now, we have phi placement code in two places and there are other
places where it would be nice to be able to do this analysis. Instead of
repeating it all over the place, this commit adds a helper for placing all
of the needed phi nodes for a value.
v2: Add better documentation
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
radeonsi uses this property to make the best decision about which
shader to compile, but this is not currently used by our codegen.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
The KHR_debug spec doesn't actually say we should handle this, but that
is most likely an oversight - it says to check against strlen and
generate errors if length is negative. It appears they just forgot to
explicitly spell out that we should then proceed to actually handle it.
Fixes crashes from uncaught std::string exceptions in many
dEQP-GLES31.functional.debug.error_filters.* tests.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
From the KHR_debug spec, section 5.5.5 (Externally Generated Messages):
"If <length> is negative, it is implied that <buf> contains a null
terminated string. The error INVALID_VALUE will be generated if the
number of characters in <buf>, excluding the null terminator when
<length> is negative, is not less than the value of
MAX_DEBUG_MESSAGE_LENGTH."
This indicates that length should be set to strlen for all types, not
just GL_DEBUG_TYPE_MARKER. We want it to be after validate_length()
so we still generate appropriate errors.
Fixes crashes from uncaught std::string exceptions in many
dEQP-GLES31.functional.debug.error_filters.* tests.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
From the KHR_debug spec:
"Applications can query the number of messages currently in the log by
obtaining the value of DEBUG_LOGGED_MESSAGES, and the string length
(including its null terminator) of the oldest message in the log
through the value of DEBUG_NEXT_LOGGED_MESSAGE_LENGTH."
Because we weren't including the null terminator, many dEQP tests
called glGetDebugMessageLog with a bufSize parameter that was 1 too
small, and unable to contain the message, so we skipped returning it,
failing many cases.
Fixes 298 dEQP-GLES31.functional.debug.* tests.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Stephane Marchesin <stephane.marchesin@gmail.com>
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
The following Coverity warning
5378 tmpl.fetch_args = atomic_fetch_args;
5379 tmpl.emit = atomic_emit;
>>> CID 1357115: Uninitialized variables (UNINIT)
>>> Using uninitialized value "tmpl". Field "tmpl.intr_name" is uninitialized.
5380 bld_base->op_actions[TGSI_OPCODE_ATOMUADD] = tmpl;
5381 bld_base->op_actions[TGSI_OPCODE_ATOMUADD].intr_name = "add";
... is a false positive, but what the hell. This change should "fix" it.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This removes any dependency on driver validation of the number of
framebuffer samples.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Brian Paul <brianp@vmware.com>
In many places, the convention is to pass an existing ssadef name ptr
when construction/initializing a new nir_ssa_def. But that goes badly
(as noticed by garbage in nir_print output) when the original string
gets freed.
Just use ralloc_strdup() instead, and add ralloc_free() in the two
places that would care (not that the strings wouldn't eventually get
freed anyways).
Also fixup the nir_search code which was directly setting ssadef->name
to use the parent instruction as memctx.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
