Note that as we are enabling the feature, we need to set the
VK_FORMAT_FEATURE_2_STORAGE_READ_WITHOUT_FORMAT_BIT_KHR for any format
that supports STORAGE_IMAGE_BIT, from spec:
"An implementation that supports
VK_FORMAT_FEATURE_STORAGE_IMAGE_BIT for any format from the given
list of formats and supports shaderStorageImageReadWithoutFormat
must support VK_FORMAT_FEATURE_2_STORAGE_READ_WITHOUT_FORMAT_BIT
for that same format if Vulkan 1.3 or the
VK_KHR_format_feature_flags2 extension is supported."
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20744>
Needed to support Vulkan feature shaderStorageImageReadWithoutFormat.
With that enabled we could receive a NONE format on a load image. For
those we treat them as 32-bit formats, that would mean that the
lowering would not need to do any format-specific unpacking.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20744>
Original patches wrote by Ella Stanforth.
Alejandro Piñeiro main changes (skipping the small fixes/typos):
* Reduced the list of supported formats to
VK_FORMAT_G8_B8_R8_3PLANE_420_UNORM and
VK_FORMAT_G8_B8R8_2PLANE_420_UNORM, that are the two only
mandatory by the spec.
* Fix format features exposed with YCbCr:
* Disallow some features not supported with YCbCr (like blitting)
* Disallow storage image support. Not clear if really useful. Even
if there are CTS tests, there is an ongoing discussion about the
possibility to remove them.
* Expose VK_FORMAT_FEATURE_COSITED_CHROMA_SAMPLES_BIT, that is
mandatory for the formats supported.
* Not expose VK_FORMAT_FEATURE_2_MIDPOINT_CHROMA_SAMPLES_BIT. Some
CTS tests are failing right now, and it is not mandatory. Likely
to be revisit later.
* We are keeping VK_FORMAT_FEATURE_2_DISJOINT_BIT and
VK_FORMAT_FEATURE_2_MIDPOINT_CHROMA_SAMPLES_BIT. Even if they
are optional, it is working with the two formats that we are
exposing. Likely that will need to be refined if we start to
expose more formats.
* create_image_view: don't use hardcoded 0x70, but instead doing an
explicit bit or of VK_IMAGE_ASPECT_PLANE_0/1/2_BIT
* image_format_plane_features: keep how supported aspects and
separate stencil check is done. Even if the change introduced was
correct (not sure about that though), that change is unrelated to
this work
* write_image_descriptor: add additional checks for descriptor type,
to compute properly the offset.
* Cosmetic changes (don't use // for comments, capital letters, etc)
* Main changes coming from the review:
* Not use image aliases. All the info is already on the image
planes, and some points of the code were confusing as it was
using always a hardcoded plane 0.
* Squashed the two original main patches. YCbCr conversion was
leaking on the multi-planar support, as some support needed
info coming from the ycbcr structs.
* Not expose the extension on Android, and explicitly assert that
we expect plane_count to be 1 always.
* For a full list of review changes see MR#19950
Signed-off-by: Ella Stanforth <estanforth@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19950>
Although for any buffer created by the user, or any API that can be
called by the user (like GetDeviceBufferMemoryRequirements) the
alignment is V3D_NON_COHERENT_ATOM_SIZE, there are internal uses of a
buffer that could require a fine-grained alignment (like when used as
a alias for a image, that has different alignment requirements).
Note that an alternative would have created a
v3dv_buffer_init_with_alignment (or similar name), but this option
seemed easier.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19950>
NIR will automatically lower all of these opcodes unless the driver
specifies that it can handle them natively. We don't have any hardware
support for any of these opcodes though, so we just let NIR lower
all of them.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20639>
In Vulkan this is expected to work with single sample scenarios too.
Fixes new test in CTS main:
dEQP-VK.pipeline.monolithic.multisample.alpha_to_one.samples_1
cc: mesa-stable
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20634>
Particularly, this makes compilation stop as soon as we get a
valid shader and doesn't try to optimize spilling by trying
fallback strategies.
Might come in handy to reduce CTS execution time, for example,
dEQP-VK.ssbo.layout.random.8bit.all_per_block_buffers.6 goes from
43m46.715s down to 15m15.068s.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20601>
CI has recently gained coverage of wayland platform in EGL tests, but
some CI mesa builds such as arm builds currently don't enable the
wayland platform.
Enable it so test applications can properly initialize EGL with a
wayland platform.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20480>
Currently, process_singlesync_signals() checks if fd == -1 to handle
possible errors in the drmSyncobjExportSyncFile function. But, fd is not
initialized, which means that drmSyncobjExportSyncFile might fail and
the error will not be handled as fd might not be equal to -1.
Therefore, initialize the fd variable with value -1 to ensure proper
error handling.
cc: mesa-stable
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20475>
So far we have been only restoring dirty dynamic states used by meta
pipelines however, static state from meta pipelines will also clear
dirty flags, preventing follow-up draw calls in the command buffer
to honor these if they are flagged as dynamic states in their
pipelines. Fix this by always resetting all dirty state flags after
a meta operation so we re-emit all the state we need with the next draw
call.
Fixes:
dEQP-VK.dynamic_state.monolithic.image.clear
cc: mesa-stable
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20356>
Nothing in the spec seems to require that the number of stages for
which creation feedback is requested must match the number of stages
available in the pipeline. In fact, the spec explicitly mentions
that this number could be 0:
"If pipelineStageCreationFeedbackCount is not 0,
pPipelineStageCreationFeedbacks must be a valid pointer to an
array of pipelineStageCreationFeedbackCount
VkPipelineCreationFeedback structures"
Fixes an assert crash in:
dEQP-VK.pipeline.monolithic.creation_feedback.graphics_tests.vertex_stage_fragment_stage_no_cache_zero_out_feedback_cout
cc: mesa-stable
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20352>
When falling back to handling subpass resolves via separate
image resolves we were resolving the entire attachment instead
of limiting the resolve to the render area defined for the render
pass.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20331>
If we can't use the TLB to do a subpass resolve we have a fallaback
that emits separate image resolves, but this fallback was only
handling color resolves. This adds depth/stencil as well.
Fixes some of the issues we have with CTS 1.3.4 in:
dEQP-VK.pipeline.monolithic.multisample.misc.*
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20331>
For these we always want to use sample_0, averaging is reserved for
color formats. We were already doing this correctly for depth/stencil
resolved in render passes, but not for those happening through
vkCmdResolveImage.
Fixes some of the issues we have with CTS 1.3.4 in:
dEQP-VK.pipeline.monolithic.multisample.misc.*
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20331>
attachment state is only relevant during render passes, however,
there is a corner case: if we can't resolve an attachment in a
subpass using the hardware, we emit a manual image resolve in the
driver which can trigger a meta operation via blit. In this case,
we pretend we are not in a render pass (since vulkan disallows
blits/resolves in a render pass) but we really want to keep the
attachment state after the meta operation.
Fixes some of the issues we have with CTS 1.3.4 in:
dEQP-VK.pipeline.monolithic.multisample.misc.*
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20331>
There are a lot of optimizations in opt_algebraic that match ('ine', a,
0), but there are almost none that match i2b. Instead of adding a huge
pile of additional patterns (including variations that include both ine
and i2b), always lower i2b to a != 0.
At this point in the series, it should be impossible for anything to
generate i2b, so there /should not/ be any changes.
The failing test on d3d12 is a pre-existing bug that is triggered by
this change. I talked to Jesse about it, and, after some analysis, he
suggested just adding it to the list of known failures.
v2: Don't rematerialize i2b instructions in dxil_nir_lower_x2b.
v3: Don't rematerialize i2b instructions in zink_nir_algebraic.py.
v4: Fix zink-on-TGL CI failures by calling nir_opt_algebraic after
nir_lower_doubles makes progress. The latter can generate b2i
instructions, but nir_lower_int64 can't handle them (anymore).
v5: Add back most of the hunk at line 2125 of nir_opt_algebraic.py. I
had accidentally removed the f2b(bf2(x)) optimization.
v6: Just eliminate the i2b instruction.
v7: Remove missed i2b32 in midgard_compile.c. Remove (now unused)
emit_alu_i2orf2_b1 function from sfn_instr_alu.cpp. Previously this
function was still used. 🤷
No shader-db changes on any Intel platform.
All Intel platforms had similar results. (Ice Lake shown)
Instructions in all programs: 141165875 -> 141165873 (-0.0%)
Instructions helped: 2
Cycles in all programs: 9098956382 -> 9098956350 (-0.0%)
Cycles helped: 2
The two Vulkan shaders are helped because of the "new" (('b2i32',
('ine', ('ubfe', a, b, 1), 0)), ('ubfe', a, b, 1)) algebraic pattern.
Acked-by: Jesse Natalie <jenatali@microsoft.com> [earlier version]
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Daniel Schürmann <daniel@schuermann.dev> [earlier version]
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15121>
Delete v3dv_CmdDispatch, v3dv_CmdSetDeviceMask, and
v3dv_GetDeviceGroupPeerMemoryFeatures so that the vk_common_*
versions will be used instead. This will avoid repeated code.
Signed-off-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20218>
The idea in the single sync path is that we serialize any job that
needs to wait, however, our ANY queue syncobj only tracks the last job
submitted to any hardware queue, so in practice when we wait on this
we are only serializing against the queue to which we have submitted
the last job, which is not correct.
Fix that by accumulating the last job sync into the ANY queue synbcobj
to ensure that waiting on this syncobj effectively waits on all
hardware queues.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20078>
Instead of having functions that return early in multi-sync mode
let's only call them when we are in single-sync mode. I think this
makes the code more explicit.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20078>
Instead of keeping a free list of "event descriptors" which are
just the offsets in the BO state that are available, pre-allocate
the events. This is simpler as it doesn't require to allocate these
event descriptors at all.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20053>
This reverts commit 768238fdc0 which
is not only leading to memory leaks, but also reportedly breaks KDE
pretty badly.
Fixes: #7674, #7435
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Acked-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19972>
Instead of creating all 8 pipeline combinations when we initialize
the device we create the pipelines when we need to use them. This
is probably better because applications are likely to always use
the same flags for the copy command, which means that only one
pipeline may be required.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19981>
Instead of having one shader that checks the various flags and emits
conditional code, create specialized pipelines for each relevant
combination of flags values so we can produce more optimized
pipelines with less conditional code for each scenario.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19770>
Our implementation was mostly CPU-based, with things such as query
resets and result copying handled in the CPU, as well as some aspects
of query availability tracking.
This new implementation handles all GPU-side query functions by
dispatching compute shaders to push the work to the GPU. This
involves query availability, reset and result copying.
For now, only occlusion queries are managed this way. Performance
queries can also be implemented in a similar fashion in the future
with some additional work, however, for timestamp queries our only
option to improve this would be to execute the actual timestamp in the
kernel, since we can't take a timestamp from a shader.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19770>
If we have any pending jobs queued in the command buffer state
to be emitted at the end of a given job, make sure we reset
that state once these have been processed.
cc: mesa-table
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19770>
wayland-protocols is not a library, it just contains a bunch of
XML files. No need to try to link to it.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19894>
From:
defined[\s]*\([\s]*PIPE_(OS|ARCH|CC)_([0-9A-Z_]+)[\s]*\)
To:
DETECT_$1_$2
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19674>
After 'v3dv: fix debug dump on BO free' we changed the order, and this
lead to the following test
dEQP-VK.api.object_management.multithreaded_per_thread_resources.device_memory_small
v2: Expanded comment just before the reset, explaining that we need to
do the reset before we free the BO from the kernel (Iago)
Raising this assertion:
deqp-vk: ../src/broadcom/vulkan/v3dv_bo.c:281: v3dv_bo_alloc: Assertion `bo && bo->handle == 0' failed.
Fixes: 2c44597181 ('v3dv: fix debug dump on BO free')
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19693>
This reverts commit cb02cf464c.
There are 3 reported flakes over a period of a month, and we have been
unable to reproduce it even once. It clearly doesn't happen often enough
to warrant disabling our vulkan CI, so let's restore it while we
continue to try to reproduce the issue on our side.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Acked-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19720>
Imported BOs are not allocated by the device so we don't
update BO stats when they are imported. Therefore, we should
not be updating them when they are freed either.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19675>
