This reverts commit 96e8b916a7.
In the case of VCE encoding with raw YUV file, CPU load directly
to VRAM is faster than combination of CPU writing to GTT and
then blit to VRAM with GPU.
Reviewed-by: Christian König <christian.koenig@amd.com>
v2: fix whitespace errors, minor coding style changes
Signed-off-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Keep a dynamically increasing array of all the views
created for a texture instead of just the last one.
v2: add comments, fix array size calculation,
release only the first sampler view found
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The xa version number had to be set in two places. In configure.ac and in
xa_tracker.h. Furthermore, xa_tracker.h is an installed header so we can't
use mesa internal defines. So therefore, at configure time, modify the
xa_tracker.h header to use the version given by configure.ac
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
/me puts a paper bag on his head and sits in the corner.
This was supposed to be included in 5a68f731, which added
glPointSizePointerOES back to the list of functions exposed by
libGLESv1_CM. It looks like it was an uncommitted change in my tree
when I sent the patch out.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
We are checking for no-ops in the CSO module for both of these items
so there's no reason to do it in the driver.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
As we do for sampler states in single_sampler_done() and many other
CSO functions.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Put the -c in the correct place (and match Makefile.am).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76960
Tested-by: Vinson Lee <vlee@freedesktop.org>
Signed-off-by: José Fonseca <jfonseca@vmware.com>
Previously GLX_EXT_buffer_age has always been advertised as supported because
both client_glx_support and client_glx_only where set. So it did not matter
that direct_support is only set when running dri3 and we ended up always
advertising it.
Fix that by not setting client_glx_only for buffer_age in known_glx_extensions.
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We want to call pipe->set_sampler_views() with count being the
maximum of the old number of sampler views and the new number.
This makes sure we null-out any old sampler views.
We already do the same thing for sampler states in single_sampler_done().
Fixes some assertions seen in the VMware driver with XA tracker.
Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Tested-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
The OpenGL ES 1.1 conformance tests expect this function to be
statically available form libGLESv1_CM.so. The comment "required for
es1.1" in the XML file should have been a clue.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76926
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Lu Hua <huax.lu@intel.com>
This reverts commit 526e49290c.
The original build problem should be fixed by the previous commit.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Brian Paul <brianp@vmware.com>
Tested-by: Lu Hua <huax.lu@intel.com>
Ages ago Chia-I added an ES compatibility flag to several of the various
generator scripts. The intention was to bridge differences between ES
and desktop in Mesa builds without ES. It doesn't appear that it has
ever been used. Recent changes to static_dispatch status of several ES1
functions caused problems in desktop-only, non-shared-glapi builds.
Enabling the ES compatibility mode appears to fix these build problems.
This is kind of a duct tape solution to this problem. As I mentioned in
the cover letter for the series that triggered the build problem, I
would like to make some major changes to the generator architecture and
the XML. The whole point of the proposed architecture changes is to
better handle the differences between desktop GL and ES. I think duct
tape is okay for now.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76869
Tested-by: Brian Paul <brianp@vmware.com>
Tested-by: Lu Hua <huax.lu@intel.com>
Cc: Vinson Lee <vlee@freedesktop.org>
Cc: Chia-I Wu <olv@lunarg.com>
Commit fb78fa58 made the GL_ARB_debug_output functions aliases of the
GL_KHR_debug output functions. As a result, the function names in
struct _glapi_table also changed. The table in check_table.cpp used the
ARB names.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
Tested-by: Brian Paul <brianp@vmware.com>
Tested-by: Lu Hua <huax.lu@intel.com>
Cc: Vinson Lee <vlee@freedesktop.org>
C89 has a fairly short minimum-maximum string length. To support
compilers limited by the C89 limits, this script had a mode where it
would generate a character array instead of a giant string. These were
functionally the same, but the code generated for the character array is
HUGE and difficult to read.
As far as I can tell, nothing in Mesa uses '-m short' any more. The
generated files used to be tracked in revision control, but I think we
stopped using '-m short' when we stopped tracking the generated files.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Brian Paul <brianp@vmware.com>
Tested-by: Lu Hua <huax.lu@intel.com>
Cc: Vinson Lee <vlee@freedesktop.org>
Nested for loops running through tables against which they
finally do an assert were ran also with optimized builds.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
% operator could return negative value which would cause
indexing before perm table. Change %256 to &0xff
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Do not set a writemask on Gen6 for math instructions, those are
executed using align1 mode that does not support a destination mask.
v2: cleanups, better comment (Matt)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76883
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This is to avoid running out of query buffer space due to winsys
limitations. Instead of a fixed size per screen pool of query buffers,
use a slab allocator that allocates a new slab if we run out of space
in the first one.
v2: Correct email addresses.
v3: s/8192/VMW_QUERY_POOL_SIZE/. Improve documentation and log message.
Reported-and-tested-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
This adds a gallium cap that allows us to fake GL3.0 by
not exposing MSAA on sw rendering.
It also forces the extra extensions needed for GL3.2.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reverts commit f6e290f80c.
To fix the broken build. The DRI-enabled build seems OK after reverting.
Th non-DRI/gallium build is still suffering from an unrelated issue in
the pipe-loader code.
Currently, we raise an error when doing this which breaks a conformance
test from the OpenGL samples pack. Even if this is a bit silly it is not
an error.
From http://www.opengl.org/wiki/Rectangle_Texture:
"Rectangle textures contain exactly one image; they cannot have mipmaps.
Therefore, any texture parameters that depend on LODs are irrelevant
when used with rectangle textures; attempting to set these parameters to
any value other than 0 will result in an error."
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76496
Reviewed-by: Brian Paul <brianp@vmware.com>
The previous commit stopped exporting 21 libGLESv2 and 88 libGLESv1_CM
functions. This removes the work-arounds for those functions from
ABI-check.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Chad Versace <chad.versace@linux.intel.com>
This has been a long standing issue with the ES libraries. Functions
marked in the XML with 'static_dispatch=false' were still incorrectly
exported. ABI-check is supposed to detect this case, but we have to
paper over failures every time a new extension is added.
This change will cause a big pile of functions to disappear from
libGLESv2 and libGLESv1_CM.
libGLESv2 loses (20 functions):
glBindVertexArrayOES
glCompressedTexImage3DOES
glCompressedTexSubImage3DOES
glCopyTexSubImage3DOES
glDeleteVertexArraysOES
glDiscardFramebufferEXT
glDrawBuffersNV
glFlushMappedBufferRangeEXT
glFramebufferTexture3DOES
glGenVertexArraysOES
glGetBufferPointervOES
glGetProgramBinaryOES
glIsVertexArrayOES
glMapBufferOES
glMapBufferRangeEXT
glProgramBinaryOES
glReadBufferNV
glTexImage3DOES
glTexSubImage3DOES
glUnmapBufferOES
libGLESv1_CM loses (88 functions):
glAlphaFuncxOES
glBindFramebufferOES
glBindRenderbufferOES
glBlendEquationOES
glBlendEquationSeparateOES
glBlendFuncSeparateOES
glCheckFramebufferStatusOES
glClearColorxOES
glClearDepthfOES
glClearDepthxOES
glClipPlanefOES
glClipPlanexOES
glColor4xOES
glDeleteFramebuffersOES
glDeleteRenderbuffersOES
glDepthRangefOES
glDepthRangexOES
glDiscardFramebufferEXT
glDrawTexfOES
glDrawTexfvOES
glDrawTexiOES
glDrawTexivOES
glDrawTexsOES
glDrawTexsvOES
glDrawTexxOES
glDrawTexxvOES
glFlushMappedBufferRangeEXT
glFogxOES
glFogxvOES
glFramebufferRenderbufferOES
glFramebufferTexture2DOES
glFrustumfOES
glFrustumxOES
glGenerateMipmapOES
glGenFramebuffersOES
glGenRenderbuffersOES
glGetBufferPointervOES
glGetClipPlanefOES
glGetClipPlanexOES
glGetFixedvOES
glGetFramebufferAttachmentParameterivOES
glGetLightxvOES
glGetMaterialxvOES
glGetRenderbufferParameterivOES
glGetTexEnvxvOES
glGetTexGenfvOES
glGetTexGenivOES
glGetTexGenxvOES
glGetTexParameterxvOES
glIsFramebufferOES
glIsRenderbufferOES
glLightModelxOES
glLightModelxvOES
glLightxOES
glLightxvOES
glLineWidthxOES
glLoadMatrixxOES
glMapBufferOES
glMapBufferRangeEXT
glMaterialxOES
glMaterialxvOES
glMultiTexCoord4xOES
glMultMatrixxOES
glNormal3xOES
glOrthofOES
glOrthoxOES
glPointParameterxOES
glPointParameterxvOES
glPointSizePointerOES
glPointSizexOES
glPolygonOffsetxOES
glQueryMatrixxOES
glRenderbufferStorageOES
glRotatexOES
glSampleCoveragexOES
glScalexOES
glTexEnvxOES
glTexEnvxvOES
glTexGenfOES
glTexGenfvOES
glTexGeniOES
glTexGenivOES
glTexGenxOES
glTexGenxvOES
glTexParameterxOES
glTexParameterxvOES
glTranslatexOES
glUnmapBufferOES
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Chia-I Wu <olv@lunarg.com>
Cc: Paul Berry <stereotype441@gmail.com>
This is hella ugly. The same-named function in desktop OpenGL is
hidden, but it needs to be exposed by libGLESv2 for OpenGL ES 3.0.
There's no way to express in the XML that a function should be be hidden
in one API but exposed in another.
This won't affect any change now, but it will prevent a regression in a
later patch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
