Tested with AMD's Anvil OutOfOrderRasterization demo on a RX 560.
Signed-off-by: Nicholas Miell <nmiell@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The number of viewports/scissors can only be specified at pipeline
creation time, so make sure to copy them when binding a new one
because the dynamic state is cleared in BeginCommandBuffer().
Fixes: dcf46e995d ("radv: do not update the number of scissors in vkCmdSetScissor()")
Fixes: 60878dd00c ("radv: do not update the number of viewports in vkCmdSetViewport()")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
It's not SPIR-V that's backwards from GLSL, it's Vulkan that's backwards
from GL. Let's make NIR consistent with the source language and do the
flipping inside the Vulkan driver instead.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We are really not going to use a winsys which does not need to store
the va, so might as well store it in a standard field.
Not sure this helps perf much though, as most of the cost is in the
cache miss accessing the bo anyway, which we stil need to do.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Since most games use only a few, iterating through all of them is
a waste. Simplifies the code too.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Nothing too exciting, just adding the possibility for a pNext pointer,
and batch binding. Our binding is pretty much trivial.
It also adds VK_IMAGE_CREATE_ALIAS_BIT_KHR, but since we store no
state in radv_image, I don't think we have to do anything there.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The Vulkan spec (1.0.61) says:
"The number of scissors used by a pipeline is still specified
by the scissorCount member of VkPipelinescissorStateCreateInfo."
So, the number of scissors is defined at pipeline creation
time and shouldn't be updated when they are set dynamically.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The Vulkan spec (1.0.61) says:
"The number of viewports used by a pipeline is still specified
by the viewportCount member of VkPipelineViewportStateCreateInfo."
So, the number of viewports is defined at pipeline creation
time and shouldn't be updated when they are set dynamically.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
At the moment wayland-clients, such as the Vulkan drivers were
over-linking against libwayland-server.so.
That went unnoticed, since both client and server code uses the
wl*interface symbols, which are present in both libwayland-client.so and
libwayland-server.so.
I've looked at correcting that, although that's orthogonal to this fix.
Note: wayland-egl does _not_ depend on wayland-client, although it does
need wayland-egl.h. There's no distinct package that provides it (I have
a WIP on the topic) so current solution will do for now.
v2: Rebase with the "...inline wayland_drm_buffer_get" patch removed.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Otherwise it will be missing from the tarball, leadin to build failure.
Fixes: d4d777317b ("radv: move shaders related code to radv_shader.c")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Also, it's useless to set the error code twice. Though, we
should probably skip the next commands when the command buffer
is considered invalid.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Similar to RadeonSI renderer string.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Useful to know which debug/perftest options were enabled when
a hang report is generated.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Might be useful for checking if all descriptors are sets by
the application.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
To dump them when a hang is detected.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This might be very useful in order to figure out where a shader
is stucked. This uses UMR to detect which instruction is executing
bad things.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Might report some useful information to help figuring out where
does the hang happened.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
To dump some status MMIO registers when a hang is detected.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
To dump the shader stats when a hang is detected.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Only the disassembly is currently dumped.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
To improve GPU hangs detection when shaders are stucked.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
To share common code after every draw/compute calls.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
When a GPU hang is detected in radv_gpu_hang_occured() we know
which command buffer is faulty but the bound pipelines might
have been updated during the execution.
The pointers to the radv_pipeline objects are emitted just
after the second trace ID, that way it would be easy to dump
the active shaders at the moment of the hang.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
With the shaders in the ssao demo, the nir_opt_if wasn't
working properly without this, after this the if gets optimised
so that loop unrolling gets called.
(loop unrolling fails due to instruction count, but at least
it gets to do that.)
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Per the spec:
"Resetting a command buffer is an operation that discards any
previously recorded commands and puts a command buffer in the
initial state."
As far I'm concerned, that flag can be changed by calling
VkCmdPushConstants() (or any other functions which update it),
so it should be cleared as well.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
GFX9 changes how images are layed out, so this needs updating.
Fixes: dEQP-VK.query_pool.statistics_query.*
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This field covers the whole resource.
Fixes:
dEQP-VK.pipeline.image.suballocation.sampling_type.combined.view_type.3d.format.*
dEQP-VK.texture.filtering.3d.combinations.*
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
As GFX9 can't handle 1D depth textures, radeonsi and
apparantly pro just update all 1D textures to 2D,
and work around it.
This ports the workarounds from radeonsi.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Work out the width/height from the level manually, as on GFX9
we won't minify the iview width/height.
This fixes:
dEQP-VK.api.image_clearing.core.clear_color_image* on gfx9
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We can't use it anyway in fast clears, and on GFX9 it seems to
actually hange the card if we specify it.
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
