Prior to gen8, the flag [sub]register number is in a different spot on
3src instructions than on other instructions. Starting with Broadwell,
they made it consistent. This commit fixes bugs that occur when a
conditional modifier gets propagated into a 3src instruction such as a
MAD.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit db9675f5a4)
Instead of doing a memcpy, this moves us to start with a blank
instruction (memset to zero) and copy the fields over one at a time.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 2d20303e18)
This is much cleaner than everything that wants a default value poking
at the bits of p->current directly.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 381fac2740)
On pre-4.13 kernels, which don't support I915_EXEC_BATCH_FIRST, we move
the validation list entry to the end...but incorrectly left the exec_bo
array alone, causing a mismatch where exec_bos[0] no longer corresponded
with validation_list[0] (and similarly for the last entry).
One example of resulting breakage is that we'd update bo->gtt_offset
based on the wrong buffer. This wreaked total havoc when trying to use
softpin, and likely caused unnecessary relocations in the normal case.
Fixes: 29ba502a4e (i965: Use I915_EXEC_BATCH_FIRST when available.)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
(cherry picked from commit b3ba47c592)
When the i-th target format is set, all previous target formats
must be non-zero to avoid hangs. In other words, without this
if a fragment shader exports mrt0, mrt2 and mrt3, the GPU hangs
because the target format of mrt1 is zero.
This fixes DXVK GPU hangs with "Seven: The Days Long Gone",
"GTA V" and probably more games.
Cc: "18.0" 18.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit 06d3c65098)
Otherwise on pre-GFX9, if the constant layout allows both TESS_EVAL and
GEOMETRY shaders, but the PIPELINE has only GEOMETRY, it would return the
GEOMETRY shader for the TESS_EVAL shader.
This would cause the flush_constants code to emit the GEOMETRY constants
to the TESS_EVAL registers and then conclude that it did not need to set
the GEOMETRY shader registers.
Fixes: dfff9fb6f8 "radv: Handle GFX9 merged shaders in radv_flush_constants()"
CC: 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 2835b6baf4)
Implement ir_binop_vector_extract using NIR operations. Based on SPIR-V
to NIR approach.
This fixes:
dEQP-GLES3.functional.shaders.indexing.moredynamic.with_value_from_indexing_expression_fragment
Piglit's glsl-fs-vec4-indexing-8.shader_test
CC: mesa-stable@lists.freedesktop.org
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Iago Toral <itoral@igalia.com>
(cherry picked from commit cbe4baed1f)
With GFX9 merged shaders, active_stages would be set to the original
stages specified if shaders were not cached, but to the stages still
present after merging if they were.
Be consistent and use the original stages.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Cc: "18.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit 0fa51bfdbe)
[Dylan Baker: resolve trivial conflict]
Conflicts:
src/amd/vulkan/radv_pipeline.c
The value returned by tgsi_util_get_texture_coord_dim() does not
account for the sample index. This means image_fetch_coords() will not
fetch it, leading to a null deref in ac_build_image_opcode() which
expects it to be present (the return value of ac_num_coords() *does*
include the sample index).
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Cc: "18.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 01a2414045)
This was not previously handled correctly. For example,
push_constant_stages might only contain MESA_SHADER_VERTEX because
only that stage was changed by CmdPushConstants or
CmdBindDescriptorSets.
In that case, if vertex has been merged with tess control, then the
push constant address wouldn't be updated since
pipeline->shaders[MESA_SHADER_VERTEX] would be NULL.
Use radv_get_shader() instead of getting the shader directly so that
we get the right shader if merged. Also, skip emitting the address
redundantly - if two merged stages are set in push_constant_stages
this change would have made the address get emitted twice.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Cc: "18.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit dfff9fb6f8)
This was being handled in a few different places, consolidate it into a
single radv_get_shader() function.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Cc: "18.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit 7ca0167ae9)
Bindless texture handles can be passed via vertex attribs using this type.
This fixes a bunch of bindless piglit tests on radeonsi.
Cc: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit a8e1413876)
The modifiers array hasn't been initialised by then, much less with data
that would need freeing.
Move the label after the loop to fix this.
Fixes: c80c08e226 ("vulkan/wsi/x11: Add support for DRI3 v1.2")
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
(cherry picked from commit e4fe2fd3bb)
Fixes: f7604d8af5 ("st/dri: only expose config formats that are display targets")
Cc: "18.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit 30918b77ac)
The current implementation depends on bpermute, which
is VI+.
Fixes: f2c6a55061 "radv: enable subgroup capabilities"
Reviewed-by: Daniel Schürmann <daniel.schuermann@campus.tu-berlin.de>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit c2799574eb)
This code path is no longer required with framebuffer modifier support.
Tested-by: Daniel Kolesa <daniel@octaforge.org>
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
(cherry picked from commit bd3e97e5aa)
Resources created for scanout but without modifiers need to be treated
as pitch-linear. This is because applications that don't use modifiers
to create resources must be assumed to not understand modifiers and in
turn won't be able to create a DRM framebuffer and passing along which
modifiers were picked by the implementation.
Tested-by: Daniel Kolesa <daniel@octaforge.org>
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
(cherry picked from commit 9603d81df0)
Resources created with modifiers are treated as scanout because there is
no way for applications to specify the usage (though that capability may
be useful to have in the future). Currently all the resources created by
applications with modifiers are for scanout, so make sure they have bind
flags set accordingly.
This is necessary in order to properly export buffers for such resources
so that they can be shared with scanout hardware.
Tested-by: Daniel Kolesa <daniel@octaforge.org>
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
(cherry picked from commit 9e539012df)
For certain EGLImage cases, we represent a single slice or LOD of an
image with a byte offset to a tile and X/Y intratile offsets to the
given slice. Most of i965 is fine with this but it breaks blorp. This
is a terrible way to represent slices of a surface in EGL and we should
stop some day but that's a very scary and thorny path. This gets blorp
to start working with those surfaces and fixes some dEQP EGL test bugs.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106629
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit ae514ca695)
I don't know if it caused issues.
Cc: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit 92ea9329e5)
This fixes shader images where we always bind stObj->pt and not individual
gl_texture_images.
Roughly based on i965 commit 845ad2667a
which does a similar thing but for a different reason.
This fixes GL CTS assertion failures introduced by Ilia.
Cc: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit a4ba7cd6a2)
When glUseProgram is used, references to the included shaders are
added in ctx->Shader.ReferencedProgram. But those references are not
decreased when the shader data is deallocated. Thus, those shaders
are leaked.
Explicitely remove the pending references to these shaders.
Fixes: e6506b3cd2 ("mesa: retain gl_shader_programs after glDeleteProgram if they are in use")
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
(cherry picked from commit 6c61c31dc2)
Instead of directly using intel_obj->buffer. Among other things
intel_bufferobj_buffer() will update intel_buffer_object::
gpu_active_start/end, which are used by glBufferSubData() to decide
which path to take. Fixes a failure in the Piglit
ARB_shader_image_load_store-host-mem-barrier Buffer Update/WaW tests,
which could be reproduced with a non-standard glGetTexSubImage
implementation (see bug report).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105351
Reported-by: Nanley Chery <nanleychery@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
(cherry picked from commit 936cd3c87a)
Otherwise the specified surface state will allow the GPU to access
memory up to BufferOffset bytes past the end of the buffer. Found by
inspection.
v2: Protect against out-of-range BufferOffset (Nanley).
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
(cherry picked from commit e989acb03b)
The buffer texture size calculations (should be easy enough, right?)
are repeated in three different places, each of them subtly broken in
a different way. E.g. the image load/store path was never fixed to
clamp to MaxTextureBufferSize, and none of them are taking into
account the buffer offset correctly. It's easier to fix it all in one
place.
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106481
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
(cherry picked from commit 156d2c6e62)
This reverts commit c0ed52f614. It was
preventing the image format validation from being done on buffer
textures, which is required to ensure that the application doesn't
attempt to bind a buffer texture with an internal format incompatible
with the image unit format (e.g. of different texel size), which is
not allowed by the spec (it's not allowed for *any* texture target,
whether or not there is spec wording restricting this behavior
specifically for buffer textures) and will cause the driver to
calculate texel bounds incorrectly and potentially crash instead of
the expected behavior.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106465
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
(cherry picked from commit 5a68147803)
This fixes 4 out of 5 cases in:
arb_framebuffer_no_attachments-atomic on cayman.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "18.0 18.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f2f464de57)
Prevents corrupting the upper 32 bits of draw->recv_sbc when
draw->send_sbc resets to 0 (which currently happens when the window is
unbound from a context and bound to one again), which in turn caused
loader_dri3_swap_buffers_msc to calculate target_msc with corrupted
upper 32 bits. This resulted in hangs with the Xorg modesetting driver
as of xserver 1.20 (older versions and other drivers ignored the upper
32 bits of the target MSC, which is why this wasn't noticed earlier).
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/106351
Tested-by: Mike Lothian <mike@fireburn.co.uk>
(cherry picked from commit fe2edb25dd)
Fixes: d6cd14f213 "i965/fs: Define new shader opcode to..."
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
(cherry picked from commit 417b9e5770)
2x6 configuration with pci-id 0x3185 has same number of
banks (2) as 3x6 configuration (pci-id 0x3184).
Reported-by: Clayton Craft <clayton.a.craft@intel.com>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Tested-by: Clayton Craft <clayton.a.craft@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: eb23be1d97 "i965: Add and initialize l3_banks field for gen7+"
Cc: Francisco Jerez <currojerez@riseup.net>
(cherry picked from commit 0748383a60)
It's legal to set the centroid and sample interpolation modes
when MSAA disabled. So, we have to initialize the centroid
inputs because the hardware doesn't.
This fixes rendering issues with DXVK and The Witness, World of
Warcraft, Trackmania and probably more games.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106315
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102390
CC: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit 73df16dcee)
SRGB stores are broken. We had compensation code in the
resolve path but none in the copy path. Since we don't
want any conversion and it does not matter for DCC,
just make everything UNORM instead.
This happened to cause wrong colors for the PRIME path, as
that uses image->buffer copies which always use the compute
path.
CC: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106587
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit a63a0960e3)
Otherwise stuff like NDEBUG would not be passed through.
CC: <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106479
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 62e0e089d7)
The host side hasn't got support for this feature yet, so don't enable it
unless we get the caps from the host.
This makes the texture buffer range piglit tests skip now.
Fixes: fe0647df5a (virgl: add offset alignment values to to v2 caps struct)
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
(cherry picked from commit bfa74bb44d)
GetPhysicalDeviceProperties2KHR() was crashing because features was null
Fixes: 0e10790558 "radv: Enable VK_EXT_descriptor_indexing."
CC: 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit 549e54270b)
Before this patch, the aux_state was actually AUX_INVALID because the BO
was never defined. This was fine on single slice miptrees because we
would fast-clear the resource right after creation. For multi-slice
miptrees on SKL+ however, this results in undefined behavior when
accessing a non-base slice. Here's a specific example:
1) Fast clear level 0
* Undefined CCS_D buffer allocated in "PASS_THROUGH" state.
* Level 0 transitions to the CLEAR state.
2) Render to level 1
* Level 1 may have a 2-bit pattern of 2's.
* Rendering with a 2 in the CCS is undefined.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 8a9491058d)
Before this patch, if we failed to initialize an MCS buffer, we'd
end up in a state in which the miptree thinks it has an MCS buffer,
but doesn't. We also leaked the clear_color_bo if it existed.
With this patch, we now free the miptree aux buffer resources and let
intel_miptree_alloc_mcs() know that the MCS buffer no longer exists.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 816f2dc67d)
We want to add and use a function that accesses the auxiliary buffer's
clear_color_bo and doesn't care if it has an MCS or HiZ buffer
specifically.
v2 (Jason Ekstrand):
* Drop intel_miptree_get_aux_buffer().
* Mention CCS in the aux_buf field.
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com> (v1)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit af4e9295fe)
Make the next patch easier to read by eliminating most of the would-be
duplicate field accesses now.
v2: Update the HiZ comment instead of deleting it (Rafael).
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
(cherry picked from commit 5503b65103)
Seems that when the rnndb files for etniviv were updated/included back
in Nov 2017, hw/texdesc_3d.xml.h was missed from Makefile.sources and
meson.build. This was all during the conversion to meson, so it apears
to have slipped through the cracks. As such, this file has been missing
from the official tarballs since inclusion in Mesa, so the git trees
and tarballs differ.
Found due to lintian errors in the Debian packages.
Fixes: f1e1c60ff6 ("etnaviv: Update from rnndb")
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
(cherry picked from commit f806cc9eb6)
Use pipe_reference to release old RAT surfaces.
RAT surface adds a reference to pool bo, so use reference counting for pool->bo
as well.
v2: Use the same pattern for both defrag paths
Drop confusing comment
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit f3521ce2c4)
We should stop walking through the CFG when the inner loop's
break block ends up as the same block as the outer loop's
continue block because we are already going to visit it.
This fixes the following assertion which ends up by crashing
in RADV or ANV:
SPIR-V parsing FAILED:
In file ../src/compiler/spirv/vtn_cfg.c:381
block->node.link.next == NULL
0 bytes into the SPIR-V binary
This also fixes a crash with a camera shader from SteamVR.
v2: make use of vtn_get_branch_type() and add an assertion
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106090
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106504
CC: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 6bde8c5608)
Otherwise the build fails with an undefined reference to
clang::FrontendTimesIsEnabled.
Bugzilla: https://bugs.freedesktop.org/106209
Cc: Jan Vesely <jan.vesely@rutgers.edu>
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Acked-by: Jan Vesely <jan.vesely@rutgers.edu>
Tested-by: Aaron Watry <awatry@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
(cherry picked from commit b691d9192c)
The hardware always interprets the alpha as unsigned and fixing it
in the shader is going to add unacceptable overheads.
CC: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106480
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit f944a59996)
Pre-Vega HW always interprets the alpha for this format as unsigned,
so we have to implement a fixup to do the sign correctly for signed
formats.
v2: Improve indexing mess.
CC: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106480
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 3d4d388e39)
