If the offset is large enough, it could affect the width. I'm also not
sure if the hardware masks the offset by 0x1f.
Found by inspection. No fossil-db changes.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6424>
This would move the old exec mask back into exec. This also fixes the
live_out_exec.
Issue found in dEQP-VK.graphicsfuzz.cosh-return-inf-unused
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Cc: 20.2 <mesa-stable>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6212>
While TRAP_PRESENT is always at the same place, EXCP_EN can be
different between shader stages. This sets it properly.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6452>
These consist of the variations nir_op_{i|u|f}{min|max|med}3 which are either
lowered in the backend (LLVM) anyway or can be recombined by the backend (ACO).
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6421>
Previously, when the instruction had 3 operands, this would cause
possible corruption because of writing to sdwa->sel[2].
This was noticed thanks to GCC 10's -Wstringop-overflow warning.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6436>
It should reliably report the faulty shader but the faulty instruction
is inacurate, especially for memory violations because it's reported
when the addr is processed. It will be improved by emitting more
wait-states.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6384>
When TRAP_PRESENT is not enabled, all traps and exceptions are ignored.
Only EXCP_EN.mem_viol is currently supported because the other
exceptions have to be tested/validated first.
EXCP_EN.mem_viol is used to detect any sort of invalid memory
access like VM fault. When a memory violation is reported, the
hw jumps to the trap handler.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6384>
A trap handler is used to handle shader exceptions like memory
violations, divide by zero etc. The trap handler shader code will
help to identify the faulty shader/instruction and to report
more information for better debugging.
This has only been tested on GFX8, though it should work on GFX6-GFX7.
It seems we need a different implemenation for GFX9+.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6384>
Similar to the GS copy shader except that NIR is unused because
the shader is written directly using ACO IR.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6384>
The shader is written by hands with assigned registers, so most of
the pass are unnecessary.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6384>
It's way easier to write a trap handler shader using ACO IR
instead of writing disassembly by hand + clrxasm + copy&paste.
This trap handler is quite simple for now, it just loads a
buffer descriptor from the TMA BO, it saves ttmp0-1 which
contain various info about the faulty instruction, and it
stores some hw registers about the wave/trap status.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6384>
To fix a validation error when loading the scalar tma buffer
descriptor because it's not a temp but a fixed reg (tma_lo/tma_hi).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6384>
The TBA/TMA scalar registers are only available on GFX6-GFX8.
On GFX9+, TBA/TMA addr are stored in hardware registers and
the number of TTMP scalar registers is thus increased by 4.
Just keep in mind that tba_lo is actually ttmp0. Best would
be to support ttmp registers in RA but that's more complicated.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6384>
If no options are provided, existing intrinsics are used.
If the lowering pass indicates there should be offsets used for global
invocation ID or work group ID, then those instructions are lowered to
include the offset.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5891>
The actual variable -> intrinsic lowering stays where it is, but
ops which convert one intrinsic to be implemented in terms of
another have moved.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5891>
New intrinsics are added for global invocation IDs and work group IDs to
deal with offsets in both. The only one of these that needs a system value
is global invocation offset, for CL's get_global_offset().
Note that CL requires very large work group sizes, so these intrinsics
are modified to be able to use 64bit values, for 64bit SPIR-V.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5891>
It was always fneu but naming it fne causes confusion from time to time. So
lets rename it. Later we also want to add other unordered and fne, this is
a smaller preparation for that.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6377>
We were using the wrong conversion opcode. The high bits are also not
zero'd on GFX10, which can cause v_cvt_pk_u16_u32 to clamp.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Fixes: df645fa369 ('aco: implement VK_KHR_shader_float_controls')
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6346>
Sounds useful for debugging missing wait-states and for improving
detection of the faulty instruction in case of memory violations.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6386>
Ignore everything that is not an instruction. This should fix
the annotated UMR disassembly.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6387>
The OpenCL image_width/height/depth functions have variants which can
take an LOD parameter. More importantly, LLVM-SPIRV-Translator always
generates OpImageQuerySizeLod even if the LOD is guaranteed to be zero.
Given that over half the hardware out there has an LOD field for image
size queries (based on a rudimentary scan through their NIR -> whatever
code), we may as well just add the source to the NIR intrinsic. If this
is ever a problem for anyone, the lowering is pretty trivial.
I've also added asserts to everyone's drivers that should alert them if
they ever see an LOD other than zero. This will never happen with GL or
Vulkan so there's no need for panic.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6396>
Upcoming changes to opt_undef will result in this pass doing more work and
generating vector MOVs that need re-scalarizing (which is inside of the
main opt loop).
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6054>
Fixes UBSan error:
../src/amd/vulkan/radv_pipeline_cache.c:603:42: runtime error: member access within misaligned address 0x00000152ebcc for type 'struct cache_entry', which requires 8 byte alignment
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6206>
This could then pass NULL to memcpy. Fixes UBSan error:
../src/util/sha1/sha1.c:140:8: runtime error: null pointer passed as argument 2, which is declared to never be null
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6206>
