this adds minimal validation for tex ops with derefs to check that the
dest type integer-ness matches the sampled type's integer-ness
the aim is to provide the most basic validation that nir is being modified
and created consistently, not to perform exact verification that
the types are identical
fix#6985
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17874>
We want to be able to carry this along with the shader instead of always
having to re-generate it from scratch. A new nir_gather_xfb_info()
helper is also added which, instead of returning it, adds it to the
shader.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16750>
These are functions that run before the entrypoint at least once per
draw and write their results via store_preamble, and then are loaded in
the rest of the shader via load_preamble.
We will add users in the following commits.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13148>
This is for drivers that have separate store instructions for varyings,
system value outputs (such as clip distances), and transform feedback.
The flags tell the driver not to store the output to those locations.
This will be used by radeonsi initially, and then maybe by a new linker.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14388>
This will allow compaction of transform feedback varyings because they
are no longer tied to varying slots with this information.
It will also make transform feedback info available to all NIR passes
after IO is lowered. It's meant to replace pipe_stream_output_info.
Other intrinsics are not used with transform feedback.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14388>
Task shader outputs work differently than other shaders, so they
need special consideration. Essentially, they have two kinds of
outputs:
1. Number of mesh shader workgroups to launch.
Will be still represented by a shader output.
2. Optional payload of up to (at least) 16K bytes.
These payload variables behave similarly to shared memory, but
the spec doesn't actually define them as shared memory (also, they
may be implemented differently by each backend), so we need to add
a new NIR variable mode for them.
These payload variables can't be represented by shader outputs
because the 16K bytes don't fit the 32x vec4 model that NIR uses
for its output variables.
This patch adds a new NIR variable mode: nir_var_mem_task_payload
and corresponding explicit I/O intrinsics, as well as support for
this new mode in nir_lower_io.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14930>
Move all the NIR related debug environmental variables in a single
NIR_DEBUG one.
Use NIR_DEBUG=help to print all the available options.
v2:
- Use a macro to simplify (Marcin, Jason)
- Remove wrong changes (Marcin)
v3 (Marcin):
- Remove rendundant NIR mentioning in option descriptions.
- Unwrap option descriptions.
- Ensure the constant is unsigned.
- Use extern array to remove switch.
v4:
- Add missing kernel shader (Jason).
- Add unlikely() (Marcin).
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13840>
The nir_tex_instr_src_size helper already sorts this out correctly, no
need to do it twice, and validate_src takes care of it.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13781>
This is broken for bindless images declared as local variables. It
turns out nir_variable::data::bindless is only used for uniforms and we
already assume anything in nir_var_function_temp or similar is bindless.
We could try to make a tricky assert but now that we have everything
else passing but now that we've got everyone converted the extra
validation probably isn't necessary.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13384>
Right now we're using ralloc to GC our NIR instructions, but ralloc has
significant overhead for its recursive nature so it would be nice to use a
simpler mechanism for GCing instructions.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11776>
The rules here are the same as for texture instructions. The bits on
the intrinsic are the ground truth and are allowed to vary from the
deref a bit as-needed. If the intrinsic says PIPE_FORMAT_NONE, then we
can look at the variable, if visible, to get format information. This
means that we need to be careful when we rewrite intrinsics based on the
deref to only override the format from the _deref intrinsic from the
image variable unless the intrinsic is PIPE_FORMAT_NONE.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11849>
VS outputs are "per vertex" but not the kind of I/O we want to match
with this helper. Change to a name that covers the "arrayness"
required by the type.
Name inspired by the GLSL spec definition of arrayed I/O.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10493>
In theory, we could also verify this against the sampler type for
sampler derefs, but there are a number of complications there:
- SPIR-V 1.4 lets you override the signedness of integer samplers
per-instruction. So the base type may not match.
- mediump/RelaxedPrecision samplers may get lowered to f16 in the
instruction or may not. So the bitsize may not match.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7989>
If bit_size_src is not -1, then it's the index of the source the
destination bit size can be expected to match. This will be useful for
generating intrinsic builders
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6587>
Halt is like a return for the entire shader or exit() if you prefer to
think of it that way. Once an invocation hits a halt, it's 100% dead.
Any writes to output variables which happened before the halt do,
however, still apply.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7356>
Makes the code more concise, and makes helgrind/drd happy at the same
time!
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7644>
We can use num_blocks (if it's been initialized by some pass indexing
blocks) to pre-size our table, which helps on validating shaders with many
blocks which would otherwise reallocate the set several times.
No statistically significant performance difference on softpipe
KHR-GL33.texture_swizzle.functional runtime (n=15). A previous, similar
variant of this patch cut .3% of instructions in softpipe shader-db ./run
shaders/closed/steam/borderlands-2/35* (an arbitrary set of shaders that
completed in reasonable amount of time) according to callgrind.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7244>
GLSL requires that image atomics have formats and there are rules about
things matching properly. We should enforce those in NIR unless we have
reason to do otherwise.
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7509>
If we were desperate to reduce bits, we could probably also use
shader_in/out for hit attributes as they really are an output from
intersection shaders and read-only in any-hit and closest-hit shaders.
However, other passes such as nir_gether_info like to assume that
anything with nir_var_shader_in/out is indexed using vec4 locations for
interface matching. It's easier to just add a new variable mode.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6479>
The guts are still missing so it will blow up if it sees any
deref_mode_is intrinsic that it can't constant-fold from the mode.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6332>
Most of this is fairly straightforward; we just set all the modes on any
derefs which are generic. The one tricky bit is OpGenericCastToPtrExplicit.
Instead of adding NIR intrinsics to do the cast, we add NIR intrinsics
to do a storage class check and then bcsel based on that.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6332>
The way they're handled is that deref->modes is treated as a bitfield of
possible modes. Variables are required to have a specific mode and
derefs with deref_type_var are as well.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6332>
We rename it to "modes" to make it clear that it may contain more than
one mode and adjust all the uses of nir_deref_instr::modes to attempt to
handle multiple modes.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6332>
NIR derefs currently have exactly one variable mode. This is about to
change so we can handle OpenCL generic pointers. In order to transition
safely, we need to audit every deref->mode check. This commit adds a
set of helpers that provide more nuanced mode checks and converts most
of NIR to use them.
For simple cases, we add nir_deref_mode_is and nir_deref_mode_is_one_of
helpers. These can be used in passes which don't have to bother with
generic pointers and just want to know what mode a thing is. If the
pass ever encounters generic pointers in a way that this check would be
unsafe, it will assert-fail to alert developers that they need to think
harder about things and fix the pass.
For more complex passes which require a more nuanced understanding of
modes, we add nir_deref_mode_may_be and nir_deref_mode_must_be helpers
which accurately describe the compiler's best knowledge about the given
deref. Unfortunately, we may not be able to exactly identify the mode
in a generic pointers scenario so we have to be very careful when we use
these. Conversion of these passes is left to later commits.
For the case of mass lowering of a particular mode (nir_lower_explicit_io
is one good example), we add nir_deref_mode_is_in_set. This is also
pretty assert-happy like nir_deref_mode_is but is for a set containment
comparison on deref modes where you expect the deref to either be all-in
or all-out.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6332>
In particular, OpenCL needs to allow shader_temp and function_temp
through because they're 100% real pointers.
Fixes piglit CL calls.cl
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7092>
This new intrinsic is capable of handling the full range of conversions
from OpenCL including rounding modes and possible saturation. The
intention is that we'll emit this intrinsic directly from spirv_to_nir
and then lower it to ALU ops later.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6945>
This commit adds a number of new validation checks:
1. We now check that every block pointer in the IR points to a block
that actually exists in a block list that's reachable from the
nir_function_impl.
2. We assert that nir_function_impl::body is non-empty
3. We assert that the start block has no predecessors. This is
important because we tend to put run-once code there.
4. We now validate some stuff on the end block.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6750>
