Production Tigerlake and DG1 hardware shouldn't need this workaround.
It was only needed on the very first steppings which never went public.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16575>
OA reports on XeHP have their timestamp shifted to the left by 1. To
get that back in the same time domain as the REG_READ you need to
shift it back to the right and you're loosing the top bit.
v2: use ull for 64bit constant (Ian)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16144>
New counters will use those from inside their read function to
generate percentage numbers.
v2: Forgot to update Iris (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v1)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16144>
On Gfx12.5 products, we'll need to capture a couple of A counters that
are not captured in MI_RPC reports. Those are actually global,
previously all A counters were per context.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16144>
This already set in the intel_perf_setup.h file at metric set
creation.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16144>
In the future we'll pull more information off devinfo.
v2: Constify pointers (Ian)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16144>
We already had a little workaround for v3dv where, for some if its meta
ops, it had to bind a depth/stenicil image as color. Instead of
special-casing binding depth/stencil as color, let's flip on the
drier_internal flag and get rid of most of the checks in that case.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16376>
XeHP supports a 20:5 pointer format, so the offset can legitimately
be more than UINT16_MAX. Likewise, with 256B binding table mode on
Icelake/Tigerlake, we might have 18:8 pointers that exceed UINT16_MAX.
Thanks to Felix DeGrood for catching this!
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16538>
Import the intact whole rendertest file from skqp (branch
android-cts-12.1_r1) to be able remove the offending test line in the
following commit.
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16407>
This is set to true for all drivers that have a GLSL level
of support lower than 4.00. This matches the rule for setting the
GLSL IR option EmitNoIndirectSampler.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16543>
With this option enabled range of input values for fsin and fcos is
limited to [-2*pi : 2*pi] by calculating the reminder after 2*pi modulo
division. This helps to improve calculation precision for large input
arguments on Intel.
-v2: Add limit_trig_input_range option to prog_key to update shader
cache (Lionel)
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16388>
We no longer emit STATE_BASE_ADDRESS in every batch on XeHP, so the
decoder might not know what the various base addresses are if it's only
looking at a single batch. Fortunately, they also never change, so we
can just emit them once here.
On earlier platforms, initializing them here should be harmless. We'll
emit STATE_BASE_ADDRESS if we change them, which will update these.
Thanks to Iván Briano for catching this.
Fixes: 8831cb38aa ("anv: Stop updating STATE_BASE_ADDRESS on XeHP")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16287>
Mostly Matt Roper's kernel patch commit message:
The IDs added here are the subset reserved for 'motherboard down'
designs of DG2. We have all the necessary support upstream to enable
these now.
The remaining DG2 IDs for add-in cards will be enabled in a future
patch once some additional required functionality has fully landed.
Ref: https://patchwork.freedesktop.org/patch/msgid/20220425211251.77154-3-matthew.d.roper@intel.com
Cc: 22.1 <mesa-stable>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16449>
This pattern pops up a bunch and the semantics of nir_channels() aren't
very convenient much of the time. Let's add a nir_trim_vector() which
matches nir_pad_vector().
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16309>
If the secondary command buffer executed used push constants on a
different set of stages than the primary is using, we may end up not
reallocating them for the primary, getting misrender artifacts at best,
or a nice GPU hang at worst.
Fixes the tests from a CTS from the future:
dEQP-VK.dynamic_rendering.random.*
Cc: mesa-stable
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16439>
This code just got duplicated a lot. There is still more, but the
remaining instances do a bit more than just removing other functions.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16348>
We use the non-strict algorithm (with parallelograms) prior to Gen10 for
wide lines. We can not advertise rectangularLines.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Fixes: f6e7de41d7 ("anv: Implement VK_EXT_line_rasterization")
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15432>
it's been flaking with "2022-05-05 16:29:49.055151: [0m[31mERROR - Failure
getting run results: parsing results: Reading from dEQP: timed out waiting
for fd to be ready (See \"//results/c32.r1.log\")" and a pile of missings
since the brief "whoops, HW CI failed to listen to the test exit code"
regression.
The only ways I know of to hit this case would be:
1) The deqp binary abruptly wedges on its own. This happens with NFS
failures sometimes, but the rest of the run went fine and we never got the
kernel complaining about NFS, so that seems unlikely.
2) The stderr pipe filled up before stdout was completed, and deqp got
wedged trying to output stderr (happens sometimes when you do like
NIR_DEBUG=print in your run).
Both of these seem unlikely, given that we've got a big .qpa file that
made it all the way to writing out test case durations at the end of the
run before abruptly terminating. Why didn't we have at least some of the
test results parsed?
The next deqp-runner release we integrate will solve #2, and cleans up
these error paths a bunch, so I'm hoping we get more information soon.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16350>
This is now unnecessary. Either an instruction is never dynamic and
it's emitted in genX_pipeline.c or it can be and it's emitted in
genX_cmd_buffer.c/gfx8_cmd_buffer/gfx7_cmd_buffer.c
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16220>
On Gfx7 we can only give the sample location for a given multisample
number. This means everytime the multisampling value changes, we have
to re-emit the locations. It's fine because it's also where
(3DSTATE_MULTISAMPLE) the number of samples is stored.
On Gfx8+ though, 3DSTATE_MULTISAMPLE only holds the number of samples
and all the sample locations for all number of samples are located in
3DSTATE_SAMPLE_PATTERN. So to be more effecient there, we need to
track the locations for all sample numbers and compare new values with
the relevant sample count when touching the dynamic state.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16220>
