The only difference between these functions is the legal types and
sizes, so consolidate the code into a single vertex_attrib_format()
function and call it from all three entry points.
Reviewed-by: Laura Ekstrand <laura@jlekstrand.net>
This saves the cost of repeated hash table lookups when the same
vertex array object is referenced in a sequence of calls such as:
glVertexArrayAttribFormat(vao, ...);
glVertexArrayAttribBinding(vao, ...);
glEnableVertexArrayAttrib(vao, ...);
...
Note that VAO's are container objects that are not shared between
contexts.
Reviewed-by: Laura Ekstrand <laura@jlekstrand.net>
This is a convenience function that generates GL_INVALID_OPERATION
when the array object doesn't exist.
Reviewed-by: Laura Ekstrand <laura@jlekstrand.net>
opt_sampler_eot enables a direct write to framebuffer from a sample.
In order to do this the sample message needs to have a message header
so if there wasn't one already then the function adds one. In addition
the function sets the destination register to null because it's no
longer used. However it was only doing this in cases where it was
adding a message header. This patch just moves setting the destination
so that it happens even if there's a messge header. In practice this
doesn't seem to make any difference but it's a bit cleaner.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Commit 94ee908448 added a header size parameter to the function to
create the LOAD_PAYLOAD instruction. However this broke
opt_sampler_eot which manually constructs the instruction and so
wasn't setting the header_size. This ends up making the parameters for
the send message all have the wrong location and it all falls apart.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Suggested-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
This takes a different approach to previously, we cannot index into the
inputMapping with anything but the mesa attribute index, so we can't use
the just add one to index trick, we need more info to add one to it
after we've mapped the input.
(Fixed copy propgation and cleaned up a little)
v2: drop float64 format check, just attr->Doubles.
merge enable patch.
v3: cleanup code a bit.
v3.1: minor review fixups (comment, newline) (Ilia)
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds support in the vbo and array code to handle
double vertex attributes.
v0.2: merge code to handle doubles in vbo layer.
v1: don't use v0, merge api_array elt code.
Acked-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The spec is vague all over the place about this, but this seems
to be the intent, we can probably make this optional later if
someone makes hw that cares and writes a driver.
Basically we need to double count some of the d types but
only for totalling not for slot number assignment.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>
instead of doing the attempts at dual slot handling here,
let the backend do it.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just more boilerplate stuff.
v2:
bad fallthrough on versioning,
this is my ugly but self contained solution (Ian)
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just add the boilerplate bits.
v2: add to version.c
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just adds the glapi bits.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This hack for fixing gl_FragDepth apparantly caused a GLSL shader
outputting a single double to try and output a dvec4, but we hadn't
assigned outputs for the secondary bit.
This avoids going into the hack code for scalar doubles.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Normally this is always needed but for internal blits and clears
we need to be able to disable it.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reduces the number of conditions tested in if to one in case of
non-integer formats. Makes no functional changes.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
... and (a >= c) || (b >= c) as max(a, b) >= c.
Similar to commit 97e6c1b9.
total instructions in shared programs: 6182276 -> 6182180 (-0.00%)
instructions in affected programs: 6400 -> 6304 (-1.50%)
helped: 68
HURT: 4
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
No changes, but does prevent some regressions in the next commit.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Helps the same set of programs as the previous commit.
instructions in affected programs: 4490 -> 4346 (-3.21%)
helped: 8
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Four shaders in Unreal 4's Sun Temple are helped, and gain SIMD16
because we avoid an integer multiplication.
instructions in affected programs: 2353 -> 2245 (-4.59%)
helped: 4
GAINED: 4
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
This enables EGL_KHR_fence_sync and EGL_KHR_wait_sync.
Below is the difference in piglit results, before and after this patch.
No regressions and several tests improve from 'skip' to 'pass'. Out of
EGL_KHR_fence_sync tests, two of the multithreaded tests skip; all other
tests pass.
cmdline: piglit run -p gbm -t sync tests/quick.py
mesa: master@1ac7db0
piglit: 4069bec
hw: Ivybridge
| before after
------+-------------
pass | 32 46
fail | 0 0
crash | 0 0
skip | 35 21
total | 67 67
v2:
- Set fence->signalled = true in brw_fence_has_completed() too.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
I'm about to implement DRI2_Fenc in intel_syncobj.c. To prevent
madness, we need to prefix functions for GL_ARB_sync with 'gl' and
functions for DRI2_Fence with 'dri'. Otherwise, the file will become
a jumble of similiarly named functions.
For example:
old-name: intel_client_wait_sync()
new-name: intel_gl_client_wait_sync()
soon-to-come: intel_dri_client_wait_sync()
I wrote this renaming commit separately from the commit that implements
DRI2_Fence because I wanted the latter diff to be reviewable.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Don't pass NULL to drm_intel_bo_unreference(). It doesn't like that.
Bug found by code inspection.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Don't pass NULL to drm_intel_bo_unreference(). It doesn't like that.
Bug found by code inspection.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This should make it more obvious in bug reports while also removing
any sort of guesswork for developers.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Fix build error introduced with commit 1c5a57a "glapi/es3.1: Add support
for GLES versions > 3.0" with Python < 2.7.
File "src/mapi/glapi/gen/gl_genexec.py", line 230, in <module>
printer.Print(api)
File "src/mapi/glapi/gen/gl_XML.py", line 120, in Print
self.printBody(api)
File "src/mapi/glapi/gen/gl_genexec.py", line 187, in printBody
condition_parts.append('(ctx->API == API_OPENGLES2 && ctx->Version >= {})'.format(int(f.api_map['es2'] * 10)))
ValueError: zero length field name in format
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Having the wrong inferred type prevents a number of optimizations,
including constant propagation (since float immediates work differently
than integer immediates).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Fix Clang return-type error introduced with commit
96f164f6f0 "gallium: make
pipe_context::begin_query return a boolean".
CC r600_query.lo
r600_query.c:443:3: error: non-void function 'r600_begin_query' should return a value [-Wreturn-type]
return;
^
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
This especially helps with NIR because we currently emit MOVs at the top
of the shader to copy from various ATTR registers to a giant VGRF array
of all inputs. (This could potentially be done better, but since
there's only ever one write to each register, it should be trivial to
copy propagate away...)
With NIR - only vertex shaders:
total instructions in shared programs: 3129373 -> 2889581 (-7.66%)
instructions in affected programs: 3119717 -> 2879925 (-7.69%)
helped: 20833
Without NIR - only vertex shaders:
total instructions in shared programs: 2745901 -> 2724483 (-0.78%)
instructions in affected programs: 693426 -> 672008 (-3.09%)
helped: 3516
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
