I want to make sure that I don't introduce warnings in turnip where we
have active work going on, and I also want to make sure that the drivers
we care about testing are warnings-clean.
As with the previous -Werror change, this is for CI only and doesn't
affect end-user builds.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3607>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3607>
The previous instance of this comparision was 1u to avoid the warning, fix
this one too.
Fixes: dba71de5c6 ("aco: only create parallelcopy to restore exec at loop exit if needed")
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3607>
let the driver skip or submit an empty draw call.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3990>
They are never used by multi draws and internal draws.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3990>
Midgard has the ability to calculate addresses as part of the load/store
pipeline. We'd like to make use of this to avoid doing this work on the
ALU pipes. To do so, when emitting globals/SSBOs/shareds, we walk the
tree looking for address arithmetic to try to parse out something the
hardware can work with, letting the original instructions be DCE'd
ideally. This analysis is done at the NIR level to properly account for
some messy details of vectorization which we'd rather not poke at the
backend level. (Originally I wrote this as a MIR pass but I'm fairly
sure it was wrong.)
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3978>
The swizzles are as-if they were 32-bit regardless of the bitness of the
operation, but the source sizes can and do change depending on the
flags. Account for this in the analysis.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3978>
Many load/store ops (used for globals, SSBOs, shared memory, etc) have
the ability to compute addresses directly. Mark off which ones behave
like this.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3978>
When mixing 32/64-bit, we need to align the 32-bit registers to get the
required alignment. This isn't quite enough yet, though, since user
swizzles could bypass and will need to be lowered to 32-bit moves
(outstanding todo).
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3978>
I'm working on moving the db410c CI from docker to LAVA, which means we
get to boot a custom kernel. To do that, we need to enable ARCH_QCOM in
the kernel, save the dtb around, and include abootimg in our container so
that we can generate combined kernel/dtb/ramdisk images for fastboot.
LAVA's fastboot support is unable to pack the overlay into an abootimg
image, just a cpio rootfs. We could flash the cpio rootfs after overlay
addition, but that takes 2 minutes to do, and causes wear on the devices.
Instead, we'll bring up the network at boot and use wget to fetch the
overlay. We'll want network support anyway, so that we can transfer the
failure xmls back to the gitlab job's artifacts at some point.
Since the msm GPU and realtek network firmware increase our payload by
3MB, add in firmware compression so that it doesn't waste as much RAM on
devices not using it.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
No sense building some of these subsystems for just testing the GPU.
Saves some container rebuild time and kernel contents to move around.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
The LLVM libraries were a significant fraction of the entire payload
(55M/250M uncompressed) into the initramfs of the test boards, but
LLVM is only used for the draw module used in select/feedback (which
isn't even tested in CI on ARM yet).
Assume that llvmpipe draw is safe enough for ARM given the coverage on
x86, and disable LLVM for these jobs.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
radv needs libllvm which increases our ramdisk size
significantly. Since this driver is only build tested,
we can split it out into a separate job.
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
We can drop now the GLES version overrides now that we have a DEBUG flag
that enables all what is expected from a GLES 3.0 implementation.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3950>
It works just fine, we just forgot to expose the CAP.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3950>
I'm not sure why I never saw smaller values, but here you go.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3950>
I'm not sure what this is for, but the blob does it and I'd rather not
poke farther than needed into hardware-internal details.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3950>
I'm not sure where I got the impression 1024 was the right number. From
kbase:
#define THREAD_MT_DEFAULT 256
(where MT = "max threads" and the threads to allocate for TLS is <= max
threads). Let's cut out memory footprint for spilling by 75% :)
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3950>
This field controls the size of per-thread temporaries (somehow this is
separate from the regular stack for register spilling..), though I'm not
certain on the details. Regardless this value of 0x1e despite being used
in places by the blob seems wrong and is interfering with correct sizing
of the stack.
We don't use non-spilling scratchpad yet, so this is just here to fix
some details of spilling.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3950>
