Since spills and fills use the TMU, special care has to be taken to
avoid putting one between a TMU setup instruction and the corresponding
reads or writes. This change adds logic to move fills up and move spills
down to avoid interrupting such sequences.
This allows compiling 6 more programs from shader-db. Other stats:
total spills in shared programs: 446 -> 446 (0.00%)
spills in affected programs: 0 -> 0
helped: 0
HURT: 0
total fills in shared programs: 606 -> 610 (0.66%)
fills in affected programs: 38 -> 42 (10.53%)
helped: 0
HURT: 2
total instructions in shared programs: 19330 -> 19363 (0.17%)
instructions in affected programs: 3299 -> 3332 (1.00%)
helped: 0
HURT: 5
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6606>
When calling GetPhysicalDeviceProperties2 we were ignoring and logging
the structures for extensions not supported. But for the case of
VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_PCI_BUS_INFO_PROPERTIES_EXT we
already know that we are not going to support it, so let's just do
nothing (not even logging) when passed.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7497>
We already have vk_error to report errors, they add little specific
v3dv wrapping over a simple fprintf, and they are not used really
often.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7497>
subpass_idx is of type uint32_t.
Fix defects reported by Coverity Scan.
Macro compares unsigned to 0 (NO_EFFECT)
unsigned_compare: This greater-than-or-equal-to-zero comparison of
an unsigned value is always true. subpass_idx >= 0U.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7325>
Now that the R/B swap mask for vertex attributes handles all the
attributes, ensure the right generic vertex attribute is marked.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7196>
So far the support for R/B swapping in vertex attributes were for the
generic attributes.
But there are cases like glSecondaryColorPointer() supporting BGRA
formats that require the R/B swapping to be also allowed in the
non-generic vertex attributes (in this case, in the COLOR1 attribute).
v2:
- Don't split line (Iago)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7196>
The NIR that is given to the VIR compiler is not in SSA form, and so
the v3d*_vir_emit_tex() functions must be able to handle both SSA and
register destinations.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7318>
It is not used right now, so keeping it adds some noise/confusion.
So far configuring Z test are done through the CFG_BITS. See
v3dX(emit_state) at v3dx_emit.c for v3d, and pack_cfg_bits at
v3dv_pipeline.c for v3dv. There flags like z_updates_enable and others
are filled up.
That key field seems like a leftover coming from using vc4 as
reference, as that driver defines and uses a field with name name.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7421>
If a secondary command buffer has occlusion query inheritance then
draw calls recorded in it should update an active occlusion query
counter started in the primary command buffer.
If executing the secondary in a primary required to emit jobs and
not just a branch instruction, then we might need to create a new
job for the primary as well, and in that case we would lose the
occlusion query state, so we need to re-emit it at that point so
any additional draw calls recorded into the secondary that is being
executed continue to update the counter.
Fixes:
dEQP-VK.query_pool.concurrent_queries.secondary_command_buffer
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7373>
V3D doesn't provide any means to acquire timestamps from the GPU
so we have to implement these in the CPU.
v2: enable timestampComputeAndGraphics and set timestampPeriod (Piñeiro)
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7373>
For 3D images we should take the slice to copy from or to, from
the Z coordinate of the corresponding offset, not the base array
layer.
Fixes VK_KHR_maintenance1 tests:
dEQP-VK.api.copy_and_blit.core.image_to_image.3d_images.3d_to_2d_by_slices
dEQP-VK.api.copy_and_blit.core.image_to_image.3d_images.2d_to_3d_by_layers
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7364>
So far for the formats E5B9G9R9_UFLOAT_PACK32 and
B10G11R11_UFLOAT_PACK32 we were using a XYZW swizzle. But from Vulkan
spec those are three-component, without alpha, formats. So we should
use XYZ1 instead, as we were already doing for other three-component
formats.
Curiously the only case where this raised a problem were when using
clamp to border with transparent black. This change allows us to
remove the code that handled only that specific case.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7355>
This is another case of a feature that is implemented in the compiler
and that only required that we set the shader key properly from the
pipeline state, which we were already doing.
I verified we pass the tests in dEQP-VK.pipeline.multisample.alpha_to_one.*
(we only support 4x multisampling, so we can only pass a single test there),
however, the tests seem to have a bug by which they always pass, even if
the driver doesn't actually implement alpha to one correctly. I submitted
a fix to Khronos and verified that we also pass the fixed tests (and that
we failed them if we don't actually set te shader key correctly).
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7336>
Our blit shader path allocates a descriptor pool to create
combined image sampler descriptors for blit source images. So
far, we had sized this pool statically and the driver would
fail if we ever need to allocate more descriptors than that.
With this change, we switch to using a dynamic allocation
mechanism instead where we allocate as many pools as we need to
meet descriptor set allocation requirements for the command buffer.
Also, every time a new pool needs to be created, we double its
size (up to a limit), so we can start small and avoid wasting
memory for command buffers that only have a small number of blits,
while trying to keep allocation overhead low for command buffers
that record a lot of blits.
v2: use existing framework for automatic destruction of private
driver objects to free allocated pools.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7311>
For us this is mostly handled in the compiler by a NIR lowering so
for the Vulkan driver we only need to make sure that we program our
shader key correctly from the pipeline state, which we were already
doing.
It doesn't look like CTS has any coverage for this yet so it has only
been smoke tested, but it seems to be working correctly, as expected.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7313>
This key field is only used for V3D versions before 4.1, so it
should not be set for v3dv. Also, it is a mask not a boolean.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7271>
We were computing this too early based on the view's format alone
which is not correct, since we need to consider the view's swizzle
as well.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7271>
We don't natively support BGRA format, instead we handle these
as RGBA and we lower the loads to swap components R and B.
However, the driver emits VPM loads based on the size of the
input variables so when we have a vec2 or float BGRA input,
it would only emit VPM loads for components 0 and 1, which is
not correct since we emit a load of component 2 to swap with
component 0.
v2: handle GL legacy vertex inputs gracefully.
Fixes:
dEQP-VK.draw.output_location.array.b8g8r8a8-unorm-highp-output-vec2
dEQP-VK.draw.output_location.array.b8g8r8a8-unorm-mediump-output-vec2
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7271>
There are two bits for the vector size of a vertex input, with the
value 0 meaning 4 components. The CLE decoder seems to try and dump
"4" instead of "0" is to be a bit more user friendly, but it had an
off-by-one error that would cause it to dump "2" instead.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7271>
If we are blitting to tile boundaries we don't need to emit
tile loads. The exception to this is the case where we are
blitting only a subset of the pixel components in the image
(which we do for single aspect blits of D24S8), since in that
case we need to preserve the components we are not writing.
There is a corner case where some times we create framebuffers
that alias subregions of a larger image. In that case the edge
tiles are not padded and we can't skip the loads.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7247>
Fix defect reported by Coverity Scan.
Assign instead of compare (PW.ASSIGN_WHERE_COMPARE_MEANT)
assign_where_compare_meant: use of "=" where "==" may have been intended
Fixes: ca86c7c65a ("v3dv: assert command buffers are executable when submitting to a queue")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7156>
Fix defect reported by Coverity Scan.
Uninitialized scalar variable (UNINIT)
uninit_use_in_call: Using uninitialized value time.tv_sec when calling free_stale_bos.
Fixes: f78c99f357 ("v3dv/bo: add a maximum size for the bo_cache and a envvar to configure it")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7154>
index is of type uint32_t.
Fix defect reported by Coverity Scan.
Macro compares unsigned to 0 (NO_EFFECT)
unsigned_compare: This greater-than-or-equal-to-zero comparison of
an unsigned value is always true. index >= 0U.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7153>
Fix defect reported by Coverity Scan.
Assign instead of compare (PW.ASSIGN_WHERE_COMPARE_MEANT)
assign_where_compare_meant: use of "=" where "==" may have been intended
Fixes: c75846e674 ("v3dv: implement DRM modifier setup for WSI")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7124>
We will need these to implement GLSL's interpolateAt*() functions where
we are required to perform interpolation in the shader at arbitrary
offsets.
Acked-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7155>
The aliasing we were using was not always correct. Particularly,
for 3D images, the simulator would complain about image strides
not being large enough in some cases.
This patch fixes this by aliasing both src and dst images and
carefully choosing the alias dimensions taking into account the
format chosen for the copy and the ratio of block sizes between
both images.
Playing a bit with the image dimensions used by the relevant CTS
tests we confirmed this works well for all tile layouts (lineartile,
ublinear1/2 and UIF).
This fixes all CTS tests involving 3D image copies from compressed
formats without needing to force UIF layout for all compressed
images (which would actually not work for all image sizes either).
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
This patch addresses various issues, mostly from secondary command buffers
that recorded pipeline barriers that are not consumed in the secondary itself,
so they need to be applied to jobs that come right after the execution of the
secondary in a primary command buffer.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
If a subpass clears one aspect of Depth/Stencil but loads the other
the clear might get lost. Fix this by emitting the clear as a draw
call instead of relying on the TLB clear.
Fixes:
dEQP-VK.renderpass.suballocation.attachment.3.307
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
