I think I got all the drivers that need updating. This is only
necessary in drivers that support GLSL 4.00 / GL_ARB_gpu_shader5 and
have PIPE_CAP_TEXTURE_GATHER_OFFSETS = 0.
v2: Don't (accidentally) condition tg4 offsets lowering on tex rect
lowering. Noticed by Qiang.
v3: Add missing bool() cast.
v4: don't use designated initializers
Fixes: 640f909862 ("glsl: add _texture related sparse texture builtin functions")
Closes: #6365
Tested-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16547>
This intrinsic returns a Boolean. Both 1-bit and 32-bit versions must
be allowed. Otherwise, size mismatches will occur after lowering
1-bit Booleans to 32-bit.
Fixes: 4cbdf9ec4d ("nir,spirv: implement SpvOpImageSparseTexelsResident")
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16547>
Tesscoord is declared as vec3 in the incoming shader but the z component
of a tesscoord should only be referenced in the domain shader if the
tessellator domain is of triangle type.
Fixes vmx crash running GFXBench-Tessellation with MTL Renderer.
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Min-Yu Huang <min-yuhuang@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18185>
svga gallium driver is a good citizen on arm/aarch64 linux targets.
Enable that driver for -Dgallium-drivers=auto builds.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18186>
We can't blindly make every other batch a dependency of the current
batch, because it is possible they already have a dependency on the
current batch, which would result in a loop.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18200>
If BO is freed while kernel considers it busy, our VMA state gets
desynchronized from kernel's VMA state because kernel waits
until BO stops being busy. And whether BO is busy kernel decides at
submission granularity.
On the other hand in Vulkan we may free resource as soon as we know
it won't be used.
Not completely reverting the changes in hope that proper resolution
would be found soon.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7106
Fixes: e23c4fbd9b
("tu: Switch to userspace iova allocations if kernel supports it")
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18201>
gmem is a fractional run of the full caselist, and one of them showed up
crashing on a630_vk_full after the deqp-runner uprev. Add all of them so
we don't fail on the next reshuffle either.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17932>
A later CmdBindPipeline would shrink the two draw states' sizes to the
number of VBs the pipeline actually uses, but we can save some CPU
overhead and memory by not emitting all the unused VBs as well.
Improves zink drawoverhead throughput on test 5 (1 VB change) by 38.5178%
+/- 0.48738% (n=18).
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17932>
Move all the setup of context to one function making it easier
to read it.
There is no behavior changes here.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18110>
We can do designated initialization to initialize needed values
and set the rest to zero.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18110>
batch_size is the aligned value so it is >= than the actual number
of bytes in anv_batch.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18110>
In case execbuf failed it would block execution until the maximum
timeout if DEBUG_SYNC is enabled.
While at it also removing the shadowing of result that would cause
the function result to not have its values updated in case
vk_sync_wait() returns a error.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18110>
The last usage of _gl_DispatchTSD is at commit:
df98423f24 ("mapi: Prefix functions in u_current.h by u_current.")
Wow it's 12 years ago
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17814>
They are empty stub functions now so have no need call to them
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17814>
The last commit that use ENTRY_CURRENT_TABLE_GET is:
62a68481fa ("mapi: Remove usage of USE_ELF_TLS")
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17814>
If this happens then "after" is NULL, so we can't use it to get the
block, and the instruction is never moved at the end so we have to
create the split instructions before creating the collect to make sure
they are in the right order.
This happens when reloading a complex vector value that has been
coalesced at the end of a basic block, which apparently hasn't happened
until a gfxbench5 shader on zink hit this case. This fixes it.
Closes: #7054
Fixes: 613eaac7b5 ("ir3: Initial support for spilling non-shared registers")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18082>
This is a more convenient way to struct list_head variable.
And removed the need to call list_inithead in global_init
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18092>
Changes:
- No path parameters are needed to run all tests.
- All test results are stored next to cloned repos instead of /tmp.
This is a personal preference, though not necessary.
The new setup guide is going to be:
- mesa, piglit, deqp, and glcts directories must be next to each other.
- Add `PATH=$HOME/?/mesa/src/gallium/drivers/radeonsi/ci:$PATH` into
`.bashrc`. Replace `?` with the proper path.
- Install Rust, which will include its package manager Cargo:
https://www.rust-lang.org/tools/install
- The installer will add the Cargo environment into `.bashrc`, which will
add cargo into `PATH`.
- Restart bash to get the new `PATH`.
- Run: `cargo install deqp-runner`
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
The parameters setting the various paths won't be explained to keep
the guide short.
The path parameters and env vars can be removed if everybody stops using
them after this.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18155>
Now that we are able to set iova from userspace we could support
the replay feature of BDA.
In order to prevent address clashing between ordinary allocations
and replayable ones we allocate:
- ordinary allocations - from the lowest address;
- replayable allocations - from the highest address.
Passes: dEQP-VK.binding_model.buffer_device_address.*replay*
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15676>
With MSM_INFO_SET_IOVA it's now possible for userspace to manually
set iova instead of relying on kernel.
In preparation to support bufferDeviceAddressCaptureReplay.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15676>
Fixes
--- stderr ---
strace: Can't fopen 'meson-logs/strace/intel_device_info_override_test_120_/log.10613': No such file or directory
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17928>
This is a link step because it needs to know if the previous stage is
a mesh shader.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18138>
This also moves merging the tess info.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18138>
Replace these ugly loops with something much cleaner and easier to
maintain.
There shouldn't be any functional changes.
No fossils-db changes (tested on NAVI21, VEGA10 and POLARIS10).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18138>
