Same problem and fix as for nouveau's ZaphodHeads trouble.
See patch ...
"nouveau: Use dup fd as key in drm-winsys hash table to fix ZaphodHeads."
... for reference.
Cc: "10.3 10.4 10.5 10.6" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
If an instruction using address register value gets eliminated, we need
to remove it from the indirects list, otherwise it causes mayhem in
sched for scheduling address register usage.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
A handful of fixes and cleanups:
1) If we split addr/pred, we need the newly created instruction to
end up in the unscheduled_list
2) Avoid scheduling a write to the address register if there is no
instruction using the address register that is otherwise ready
to schedule. Note that I currently don't bother with the same
logic for predicate register, since the only instructions using
predicate (br/kill) don't take any other src registers, so this
situation should not arise.
3) few other cosmetic cleanups
Signed-off-by: Rob Clark <robclark@freedesktop.org>
cp would update instr->address but not update the indirects array
resulting in sched getting confused when it had to 'spill' the address
register. Add an ir3_instr_set_address() helper to set instr->address
and also update ir->indirects, and update all places that were writing
instr->address to use helper instead.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
We need to distinguish a shader that has separate writes to each MRT
from one which is supposed to write the data from MRT 0 to all the MRTs.
In TGSI this is done with a property. NIR doesn't have that, so encode
it as a funny location and decode on the other end.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Eric Anholt <eric@anholt.net>
There was a comment saying that in SIMD16 mode the pixel interpolator
returns coords interleaved 8 channels at a time and that this requires
extra work to support. However, this interleaved format is exactly
what the PLN instruction requires so I don't think anything needs to
be done to support it apart from removing the line to disable it and
to ensure that the message lengths for the send message are correct.
I am more convinced that this is correct because as it says in the
comment this interleaved output is identical to what is given in the
thread payload. The code generated to apply the plane equation to
these coordinates is identical on SIMD16 and SIMD8 except that the
dispatch width is larger which implies no special unmangling is
needed.
Perhaps the confusion stems from the fact that the description of the
PLN instruction in the IVB PRM seems to imply that the src1 inputs are
not interleaved so it wouldn't work. However, in the HSW and BDW PRMs,
the pseudo-code is different and looks like it expects the interleaved
format. Mesa doesn't seem to generate different code on IVB to
uninterleave the payload registers and everything is working so I can
only assume that the PRM is wrong.
I tested the interpolateAt tests on HSW and did a full Piglit run on
IVB on there were no regressions.
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
The optimization logic relies on being able to read out constbuf values
from program parameters. However that only works if there's no relative
addressing involved.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91173
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
When there are no color buffer render targets, gen6 and gen7 still
use the first BLEND_STATE element to determine alpha test.
gen6_upload_blend_state was allocating zero elements when
ctx->Color.AlphaEnabled was false.
That left _3DSTATE_CC_STATE_POINTERS or _3DSTATE_BLEND_STATE_POINTERS
pointing to random data from some previous brw_state_batch().
That sometimes suppressed depth rendering when those bits
happened to mean COMPAREFUNC_NEVER.
This produced flickering shadows for dota2 reborn.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80500
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
These checks were in Mesa prior to commit fbba25bba, but they were
not necessary for the purpose that Mesa intended (check if we could
resolve ReadPixels via memcpy), so that commit took them away.
Unfortunately, it seems that some Gallium drivers rely on these
checks to make the decision of whether they should fallback to Mesa's
implementation of ReadPixels correctly. Michel Dänzer reported that
the following piglit test would fail on radeonsi after commit
fbba25bba:
spec@ext_texture_integer@fbo_integer_readpixels_sint_uint
This patch puts the checks back in Gallium, where they are needed.
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
In the immediate form, src2 == dst, so it does not need to be emitted.
Otherwise it overlaps with the immediate value's low bits.
Fixes: 09ee907266 (nv50/ir: Fold IMM into MAD)
Cc: "10.6" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Prefer blit-based texture transfers only if the chip has dedicated VRAM
since it would translate to a copy into the same memory on shared-memory
chips.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Commit 4b249d2ee (mesa: Handle transferOps in texstore_rgba) introduced
proper transferops handling, but in updating the source to the newly
allocated temporary image neglected to reset the source packing. Set it
to the default which should be appropriate for the floats used.
Fixes: 4b249d2ee (mesa: Handle transferOps in texstore_rgba)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91173
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
This is required on non-coherent architectures to ensure the value of
the fence is correct at all times. Failure to do this results in the
display freezing for a few seconds every now and then on Tegra.
The NOUVEAU_BO_COHERENT is a no-op for coherent architectures, so behavior
on x86 should not be affected by this patch.
Also bump the required libdrm version to 2.4.62, which introduced this
flag.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Although the horizontal and vertical alignment fields are ignored here,
0 is a reserved value for them and may cause undefined behavior. Change
the default value to an abitrary valid one.
v2: add comment about chosen value (Topi).
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Now that we can create builders with a bigger width than their parent as
long as it's exec_all, we don't need to create the instruction manually.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
This assertion was meant to catch code inadvertently escaping the
control flow jail determined by the group of channel enable signals
selected by some caller, however it seems useful to be able to
increase the default execution size as long as force_writemask_all is
enabled, because force_writemask_all is an explicit indication that
there is no longer a one-to-one correspondence between channels and
SIMD components so the restriction doesn't apply.
In addition reorder the calls to fs_builder::group and ::exec_all in a
couple of places to make sure that we don't temporarily break this
invariant in the future for instructions with exec_size higher than
the dispatch width.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
We want to require different versions for nouveau and nouveau_vieux.
autoconf will only check for NOUVEAU once if both drivers are enabled,
meaning both version checks don't get executed. Rename the nouveau_vieux
one to NVVIEUX to avoid the issue.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Martin Peres <martin.peres@free.fr>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Resource list can be created properly only after LinkShader hook
has been called to make sure all dead variables have been removed.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90925
This is required so that we can move resource list creation
to happen later.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Instead of using symbol table, build mask by inspecting IR. This
change is required by further patches to move resource list creation
to happen later when symbol table does not exist anymore.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
The current implementation only moves the joinAt when splitting after
the given instruction, not before it. So if you have a BB with
foo
instr
bar
joinat
and thus with joinAt set, we end up first splitting before instr, at
which point the instr's bb is updated to the new bb. Since that bb
doesn't have a joinAt set (despite containing one), when splitting after
the instr, there is nothing to copy over. Since the joinat will be in
the "split" bb irrespective of whether we're splitting before or after
the instruction, move it over in either case.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91124
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
This adds support for ARB_gpu_shader_fp64 and ARB_vertex_attrib_64bit to
llvmpipe.
Two things that don't mix well are SoA and doubles, see
emit_fetch_double, and emit_store_double_chan in this.
I've also had to split emit_data.chan, to add src_chan,
which can be different for doubles.
It handles indirect double fetches from temps, inputs, constants
and immediates. It doesn't handle double stores to indirects,
however it appears the mesa/st doesn't currently emit these,
it always does UARL/MOV combos, which will work fine.
tested with piglit, no regressions, all the fp64 tests seem to pass.
v2:
switch to using shuffles for fetch/store (Roland)
assert on indirect double stores - mesa/st never emits these (it uses MOV)
fix indirect temp/input/constant/immediates (Roland)
typos/formatting fixes (Roland)
v2.1:
cleanup some long lines, emit_store_double_chan cleanups.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
As of now, the width field is no longer used for anything. The width field
"seemed like a good idea at the time" but is actually entirely redundant
with the instruction's execution size. Initially, it gave us the ability
to easily set the instructions execution size based entirely on register
widths. With the builder, we can easiliy set the sizes explicitly and the
width field doesn't have as much purpose. At this point, it's just
redundant information that can get out of sync so it really needs to go.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Acked-by: Francisco Jerez <currojerez@riseup.net>
