Some of the counters need to be defined correctly.
v2: Remove references to extended performance counters. The hw does
not support them.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>
In v3d 4.x we handle formats that are reversed or R/B swapped by
applying a format swizzle. This doesn't work on border colors though,
and for that there is a specific bit to reverse the border color in
the texture shader state.
In v3d 7.x we have new reverse and swap R/B bits and we no longer have
a bit to reverse the border color because the new reverse bit applies
to border texels too. Because of this, we absolutely need to use these
new bits in order to get correct border colors in all cases with these
formats.
When we enable the reverse and/or swap R/B bits, we are effectively
applying the format swizzle through them, so in these cases we need to
make sure the swizzle we program in the texture shader state is the
view swizzle provided by the API and not the composition of the format
swizzle with the view swizzle like we do in 4.x for all formats. The
same applies to custom border colors: we must not apply the format
swizzle to them for formats that are reversed or R/B swapped, because
again, this format swizzle is already applied through these new bits.
While we are doing this, we also fully adopt the texture shader state
spec from v3d 7.1.5 for v3d 7.x instead of using a description from
7.1.2 which is incompatible and required the driver to manually pack
some of the bits.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>
We can use the actual bpp of each color attachment to compute real
tile memory requirements, which may allow us to choose a larger tile
size configuration than in V3D 4.2 in certain scenarios.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>
When the Z scale is too small guardband clipping may not clip
correctly, so disable it, which is a new option in V3D 7.x.
This fixes this test in V3D 7.x without needing any workarounds:
dEQP-VK.draw.renderpass.inverted_depth_ranges.nodepthclamp_deltazero
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>
On V3D 7.1 there is not a flag on the Shader State Record to specify
if we are using shared or separate segments. This is done by setting
the vpm input size to 0 (so we need to ensure that the output would be
the max needed for input/output).
We were already doing the latter on the prog_data_vs, so we just need
to use those values, instead of assigning default values.
As we are here, we also add some comments on the compiler part.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>
There are some new fields for YCbCr with pointers for the various
planes in multi-planar formats. These need to match the base address
pointer in the texture state, or the hardware will assume this is a
multi-planar texture.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>
It is likely that we would need more changes, as this packet changed,
but this is enough to get basic tests running. Any additional support
will be handled with new commits.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>
Content, structure and size would depend on the generation. Even if it
is needed at all.
So let's move it to the v3dvx files.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>
As the packet CLIPPER_XY scaling, this needs to be computed on 1/64ths
of pixel, instead of 1/256ths of pixels.
As this is the usual values that we get from macros, we add manually a
v42 and v71 macro, and define a new helper (V3DV_X) to get the value
for the current hw version.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>
Starting point for v71 version inclusion.
This just adds it as one of the versions to be compiled (on meson),
updates the v3dX/v3dv_X macros, and update the code enough to get it
compiling when building using the two versions. For any packet not
available on v71 we just provide a generic asserted placeholder of
generation not supported.
Any real v71 support will be implemented on following commits.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>
When trying to create a headless Vulkan instance without a display
device available, device enumeration would fail.
Part of the physical device creation code already accounts for a missing
display device, allow device enumeration to continue in that case too so
headless instances can be created.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25313>
The inc_compiler should come as part of idep_compiler, idep_nir or
idep_nir_headers dependency.
Acked-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com> (v3dv)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25314>
In AHB importing flow, the format is known at vkCreateImage step,
but buffer layout itself is not yet known. Buffer layout and modifier
must be updated later in vkBindImageMemory.
Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14195>
Both vk_image_init and vk_image_view_init are smarter about format
settings and respect AHB extension needs.
Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14195>
Rework it to use the existing VkImageDrmFormatModifierExplicitCreateInfoEXT
logic to set the image's explicit layout.
The code turned out to be generic enough so it could be integrated into
vk_image.c in the future and removed from the v3dv code.
Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14195>
The function extracts buffer information from the gralloc and fills
the VkImageDrmFormatModifierExplicitCreateInfoEXT structure.
Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14195>
The pipeline layout lifetime tests in CTS allocate some descriptors
and bind them to the command buffer without actually ever writing
valid resources to them since they never actually execute the command
buffers, so we want to be careful at bind time and not assume the
resources exist.
Fixes crashes in dEQP-VK.api.pipeline.pipeline_layout.lifetime.*
Fixes: 95f881adbd ('v3dv: add support for sampling simple 2D linear textures')
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25172>
