h/w specification requires this bit to be always set.
See Mesa commit 5eb173304b.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
From "Alpha Coverage" section of SKL PRM Volume 7:
"If Pixel Shader outputs oMask, AlphaToCoverage is disabled in
hardware, regardless of the state setting for this feature."
From OpenGL spec 4.6, "15.2 Shader Execution":
"The built-in integer array gl_SampleMask can be used to change
the sample coverage for a fragment from within the shader."
From OpenGL spec 4.6, "17.3.1 Alpha To Coverage":
"If SAMPLE_ALPHA_TO_COVERAGE is enabled, a temporary coverage value
is generated where each bit is determined by the alpha value at the
corresponding sample location. The temporary coverage value is then
ANDed with the fragment coverage value to generate a new fragment
coverage value."
Similar wording could be found in Vulkan spec 1.1.100
"25.6. Multisample Coverage"
Thus we need to compute alpha to coverage dithering manually in shader
and replace sample mask store with the bitwise-AND of sample mask and
alpha to coverage dithering.
The following formula is used to compute final sample mask:
m = int(16.0 * clamp(src0_alpha, 0.0, 1.0))
dither_mask = 0x1111 * ((0xfea80 >> (m & ~3)) & 0xf) |
0x0808 * (m & 2) | 0x0100 * (m & 1)
sample_mask = sample_mask & dither_mask
Credits to Francisco Jerez <currojerez@riseup.net> for creating it.
It gives a number of ones proportional to the alpha for 2, 4, 8 or 16
least significant bits of the result.
GEN6 hardware does not have issue with simultaneous usage of sample mask
and alpha to coverage however due to the wrong sending order of oMask
and src0_alpha it is still affected by it.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109743
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Invoking VALGRIND_CHECK_MEM_IS_DEFINED pulls in enough code to convince
gcc to not inline __gen_uint and results in a lot of packing code ending
up out-of-line with lots of stack copying. To ameliorate this, only
insert the check inside the packer if DEBUG is defined and instead
perform the validation checking before submitting the batch to the
kernel. This should give accurate results if --trace-origins=yes is
used, and failing that we can recompile in full debug mode to check on
insertion.
Improve drawoverhead baseline by 25% with a default build with
valgrind-dev installed (with effectively no loss of vg coverage).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Update tracked clear color when we update the surface state.
v3: Update all aux surface states when updating the clear color.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If all the restrictions are satisfied, do a fast clear instead of
regular clear.
v2:
- add perf_debug() when we can't fast clear (Ken)
- improve comment: s/miptree/resource/ (Ken)
- use swizzle_color_value from blorp (Ken)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Take the clear depth into account when IRIS_DIRTY_DEPTH_BUFFER is marked
as dirty.
Also update the blorp surface clear color.
v2: Use a single if (zres && zres->aux.bo) (Ken).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fix this check so that we can get a HiZ aux buffer for multisampled
surfaces as well. Also make sure we don't try to emit a sampler view
surface state for multisampled depth sufaces with HiZ enabled, as
the sampler can't HiZ for multisampled buffers and isl would assert.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We may bind new Z/S buffers (which come via the framebuffer CSO,
triggering IRIS_DIRTY_DEPTH_BUFFER), but with writes disabled.
The next draw may enable Z or S writes (which come via the ZSA CSO,
triggering IRIS_DIRTY_WM_DEPTH_STENCIL), which requires us to update
our pin to have the write flag.
So, update pinning if either dirty flag changes. To clarify, pass
cso_zsa to the pinning function rather than pulling the random values
out of ice->state, which unfortunately have to exist for the resolve
code since iris_depth_stencil_alpha_state only exists in iris_state.c.
This avoids the code duplication that caused me to put things in the
wrong place in the previous commit. One used to have extra flushes,
but we moved those out so now these are identical and can be easily
shared.
Commit d6dd57d43c (iris: Add missing depth cache flushes) added the
depth/stencil flushes to the wrong place. I meant to add them to the
iris_upload_dirty_render_state code that emits the packets, but I
accidentally added them to the nearly identical looking code in
iris_restore_render_saved_bos. This meant we missed the actual flushing
at draw time, but instead did pointless flushing on the first draw in a
batch where things are already flushed anyway.
This commit moves them to iris_resolve.c, next to the depth prepares,
similar to what we do for color buffers. i965 does them elsewhere, but
I'm not sure why - this seems like the most consistent place.
1. If we switch the TCS for one with a different number of output
vertices, then the TES's gl_PatchVerticesIn value will change.
We need to re-upload in this case. For now, re-emit constants
whenever the TCS/TES are swapped out.
2. If there is no TCS, then we can't grab gl_PatchVerticesIn from
the TCS info. Since it's a passthrough, we can just use the
primitive's patch count (like the TCS gl_PatchVerticesIn does).
Fixes KHR-GL45.tessellation_shader.single.max_patch_vertices and
KHR-GL45.tessellation_shader.tessellation_control_to_tessellation_evaluation.gl_PatchVerticesIn.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Now that we've added a system value uploading mechanism, we may as well
reuse the same system for default tessellation levels. This simplifies
the state upload code a bit.
Also fixes:
KHR-GL45.tessellation_shader.tessellation_control_to_tessellation_evaluation.gl_tessLevel
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Return immediately if last VS URB entry size is good enough for BLORP
operation
v2: Fix comments (Caio)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Suggested-by: Kenneth Graunke<kenneth@whitecape.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: 1) Set IRIS_DIRTY_URB bit (Caio)
2) Get rid of unnecessary function (Caio)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Suggested-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
For texturing, we map alpha formats to the corresponding red format,
as many alpha formats are outright missing, and red is more efficient
when sampling anyway.
When rendering to A8_UNORM, we use that format directly, so the image
gets the shader output's .a/.w channel, rather than the .r/.x channel.
All other A* formats are non-renderable, so we can't do much and just
mark them as unsupported for rendering. Fortunately, GL only requires
rendering to A8_UNORM, so that works out.
According to Andre Heider and Timur Kristóf, this fixes font rendering
in Witcher 1 (via nine). Andre also reported that it fixes Unigine
Heaven (presumably via nine).
v2: Use the same swizzle for both sampler views and "render targets".
BLORP expects the read swizzle, and will take the inverse when
setting up the destination swizzle (and actually applying it in
the shaders). We ignore the format swizzle when setting up normal
rendering SURFACE_STATEs, which is necessary because it would be
an illegal shader channel select combination. Thanks to Jason
Ekstrand for pointing out that BLORP took an inverse swizzle.
Tested-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Gallium might call us multiple times to bind subsets of the samplers,
at which point we'd recreate the table a bunch of times. It doesn't
really buy us anything to do it here - even if we defer to draw time,
the dirty tracking ensures we'll only do it on the first draw after a
bind_sampler_states() call.
We now use the number of samplers specified by the shader instead of
the binding count. If this number changes, we flag sampler state as
dirty so we re-upload a table with the right number of entries.
This also fixes a bug where ice->state.need_border_colors was never
unset, so once something needed border colors, the pool would always
be pinned in all future batches.
v2: Explicitly flag sampler states as dirty, rather than assuming that
bind_sampler_states() will be called if the program texture count
changes. While this may be true for st/mesa, it isn't the case for
Gallium HUD.
Tested-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This is necessary for legacy texture buffer object formats, where we'll
need to use a swizzle to fake e.g. luminance.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
If Vertex Shader uses EdgeFlag the hardware request that it is setup
as the last VERTEX_ELEMENT_STATE. If SGVS are add at draw time we
need to also reconfigure the last 3DSTATE_VF_INSTANCING so its
VertexElementIndex points to the new Vertex Element that contains
the EdgeFlag.
So if draw parameters or edgeflag are not used the CSO generated at
iris_create_vertex_element is sent directly in the batches. But if
edge flag is used we adjust last VERTEX_ELEMENT_STATE and
last 3DSTATE_VF_INSTANCING using their alternative edge flag version
we generate at iris_create_vertex_element and store at the CSO.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Additional VERTEX_ELEMENT_STATE are used to store basevertex and
baseinstance and drawid updating the DWordLength of the
3DSTATE_VERTEX_ELEMENTS command.
This passes all piglit tests for spec.*draw_parameters.* tests
and VK-GL-CTS KHR-GL45.shader_draw_parameters_tests.* tests.
Now we only mark a dirty_update when parameters are changed or
when we have an indirect draw.
We enable PIPE_CAP_DRAW_PARAMETERS on Iris.
There is no edge flag support in the Vertex Elements setup.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Ref: f1374805a8 "drm-uapi: use local files, not system libdrm"
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The Vulkan driver only sets this if color writes are disabled, which
is more conservative - but would require us to inspect blend state.
(If color writes are enabled, we don't need to force anything, because
the internal signal is already correct. But it shouldn't hurt to do so.)
I was misreading i965 - the 3DSTATE_WM::PixelShaderKillsPixel bit from
Gen < 8 needed all of this, but the 3DSTATE_PS_EXTRA bit only needs
prog_data->uses_kill.
In st_nir_lower_uniforms_to_ubo() all UBO access in the shader have
its index incremented to open room for uniforms in constbuf0. So if
we use UBOs, we always need to include the extra binding entry in the
table.
To avoid doing this checks both when compiling the shader and when
assigning binding tables, store the num_cbufs in iris_compiled_shader.
Fixes a bunch of tests from Piglit and CTS that use UBOs but don't use
uniforms or system values. Note that some tests fitting this criteria
were passing because the UBOs were moved to be push
constants (avoiding the problem).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
I think this was an attempt to work around various sample mask bugs I
had early on. It's not correct. A sample mask of 0 is legal and means
to disable all samples.
Fixes dEQP-GLES31.functional.texture.multisample.*.*sample_mask*
