sizeof counts the terminating null character as well, so that also
contributed to the ID computed for the X11 atom. But the convention is
for only the non-null characters to contribute to the atom ID.
Fixes: 2e12fe425f "loader/dri3: Enable adaptive_sync via
_VARIABLE_REFRESH property"
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit c0a540f320)
Transform feedback did not set correct SO_DECL.ComponentMask for
varyings packed in VARYING_SLOT_PSIZ:
gl_Layer - VARYING_SLOT_LAYER in VARYING_SLOT_PSIZ.y
gl_ViewportIndex - VARYING_SLOT_VIEWPORT in VARYING_SLOT_PSIZ.z
gl_PointSize - VARYING_SLOT_PSIZ in VARYING_SLOT_PSIZ.w
Fixes: 36ee2fd61c "anv: Implement the basic form of VK_EXT_transform_feedback"
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 64d3b148fe)
Previously, we only applied the fix to shaders with a dispatch mode of
SIMD8 but the code it relies on for SIMD16 mode only applies to SIMD16
instructions. If you have a SIMD8 instruction in a SIMD16 shader,
neither would trigger and the restriction could still be hit.
Fixes: 232ed89802 "i965/fs: Register allocator shoudn't use grf127..."
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit b4f0d062cd)
We need to initialize all fields in rs->prim explicitly while
creating new rastpos stage.
Fixes: bac8534267 ("st/mesa: allow glDrawElements to work with GL_SELECT
feedback")
v2: Initializing all fields in rs->prim as per Ilia.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit 69d736b17a)
Reported by Coverity: in the case of unsupported modifier request, the
code does not jump to the “fail” label to destroy the acquired resource.
CID: 1435704
Signed-off-by: Ernestas Kulik <ernestas.kulik@gmail.com>
Fixes: 45bb8f2957 ("broadcom: Add V3D 3.3 gallium driver called "vc5", for BCM7268.")
(cherry picked from commit 90458bef54)
This was copy-and-paste fail, that oddly showed up in the CTS's
reinterprets of r32f, rgba8, and srgba8 to rgba8i, but not r32ui and r32i
to rgba8i or reinterprets to other signed int formats.
Fixes: 6281f26f06 ("v3d: Add support for shader_image_load_store.")
(cherry picked from commit ab4d5775b0)
One of the CTS cases tries to invalidate just stencil of packed
depth/stencil, and we incorrectly lost the depth contents.
Fixes dEQP-GLES3.functional.fbo.invalidate.whole.unbind_read_stencil
Fixes: 0c42b5f3cb ("mesa: wire up InvalidateFramebuffer")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit db2ae51121)
Fixes: b4476138d5 freedreno: move drm to common location
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
(cherry picked from commit e252656d14)
This fixes serious stuttering in Shadow Of The Tomb Raider.
Fixes: 50fd253bd6 ("radv/winsys: Add priority handling during submit.")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit 9c762c01c8)
Reported by Coverity: in the case where there exist hardware and
non-hardware queries, the code does not jump to err_free_query and leaks
the query.
CID: 1430194
Signed-off-by: Ernestas Kulik <ernestas.kulik@gmail.com>
Fixes: 9ea90ffb98 ("broadcom/vc4: Add support for HW perfmon")
(cherry picked from commit f6e49d5ad0)
Earlier commit addressed 7 of the 8 instances available.
v2: Rebase patch back to master (by anholt)
Cc: Carsten Haitzler (Rasterman) <raster@rasterman.com>
Cc: Eric Anholt <eric@anholt.net>
Fixes: 300d3ae8b1 ("vc4: Declare the cpu pointers as being modified in NEON asm.")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 385843ac3c)
Android.mk and autotools disagree about where generated files should
go, which wasn't a problem until we wanted to build a dist
tarball. This corrects the problme by changing the output and include
paths to be the same on android and autotools (meson already has the
correct include path).
Fixes: 7d7b30835c
("automake: Fix path to generated source")
It is currently impossible to build a dist tarball that works when SWR
requires LLVM 6. To generate the tarball we'd need to configure with
LLVM 6, which is fine. But to build the dist check we need LLVM 7, as
RadeonSI and RadV require that version. Unfortunately the headers
genererated with LLVM 6 don't compile with LLVM 7, the API has changed
between the two versions.
I weighed a couple of options here. One would be to ship an
unbootstrapped tarball generated with meson. This would fix the issue
by not bootstrapping, so whatever version of LLVM used would work
because the SWR headers would be generated at compile
time. Unfortunately this would involve some heavy modifications to the
infastructure used to upload the tarballs, and I've decided not to
persue this.
Use the trick of adding and then subtracting 2**52 (52 is the number of
explicit mantissa bits a double-precision floating-point value has) to
implement round-to-even.
Cuts the number of instructions on SKL of the piglit test
fs-roundEven-double.shader_test from 109 to 21.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This batch->cleared value is only used to decide to use sysmem rendering
or not, so it should include any buffers that are affected by a clear.
This is required because the a2xx fast clear doesn't work with sysmem
rendering. The a22x "normal" clear path doesn't work with sysmem either.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Depth can be used even when there is no restore/resolve of depth. This
happens when the depth buffer is invalidated after rendering to avoid
the resolve operation.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Set dirty bits on invalidate to trigger invalidate logic in fd_draw_vbo.
Also, resource_written for color needs to be after the invalidate logic.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
And before someone actually starts implementing DiscardFramebuffer()
lets rework the interface to something that is actually usable.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This allows freedreno to be aware of the depth invalidate when flushing
batches on flush_resource.
AFAIK, the only other driver which might care about this change is vc4,
where I think it should help by allowing the depth invalidate to work with
GALLIUM_HUD.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Eric Anholt <eric@anholt.net>
Check if a pixel format is supported by the Wayland servers gpu driver
before exposing it to the client via wl_drm, so we avoid reporting formats
to the client which the server gpu can't handle.
Restrict this reporting to the new color depth 30 formats for now, as the
ARGB/XRGB8888 and RGB565 formats are probably supported by every gpu under
the sun.
Atm. this is mostly useful to allow proper PRIME renderoffload for depth
30 formats on the typical Intel iGPU + NVidia dGPU "NVidia Optimus" laptop
combo.
Tested on Intel, AMD, NVidia with single-gpu setup and on a Intel + NVidia
Optimus setup.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Support PRIME render offload between a Wayland server gpu and a Wayland
client gpu with different channel ordering for their color formats,
e.g., between Intel drivers which currently only support ARGB2101010
and XRGB2101010 import/display and nouveau which only supports ABGR2101010
rendering and display on nv-50 and later.
In the wl_visuals table, we also store for each format an alternate
sibling format which stores colors at the same precision, but with
different channel ordering, e.g., ARGB2101010 <-> ABGR2101010.
If a given client-gpu renderable format is not supported by the server
for import, but the alternate format is supported by the server, expose
the client-gpu renderable format as a valid EGLConfig to the client. At
eglSwapBuffers time, during the blitImage() detiling blit from the client
backbuffer to the linear buffer, the client format is converted to the
server supported format. As we have to do a copy for PRIME anyway,
this channel swizzling conversion comes essentially for free.
Note that even if a server gpu in principle does support sampling
from the clients native format, this conversion will be a performance
advantage if it allows to convert to the servers preferred format
for direct scanout, as the Wayland compositor may then be able to
directly page-flip a fullscreen client wl_buffer onto the primary
plane, or onto a hardware overlay plane, avoiding an extra data copy
for desktop composition.
Tested so far under Weston with: nouveau single-gpu, Intel single-gpu,
AMD single-gpu, "Optimus" Intel server iGPU for display + NVidia
client dGPU for rendering.
v2: Implement minor review comments by Eric Engestrom: Add some
comment and assert, and some style fixes for clarity.
No functional change.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Surface reads don't need them because they just have the one address
payload. With surface writes, on the other hand, we can put the address
and the data in the different halves and avoid building the payload all
together.
The decrease in register pressure and added freedom in register
allocation resulting from this change reduces spilling enough to improve
the performance of one customer benchmark by about 2x.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
We're about to add some more if cases so let's have the giant re-indent
in it's own patch to make review easier.
Acked-by: Iago Toral Quiroga <itoral@igalia.com>
These have clearly never seen any use.... On gen8, the bottom 4 bits are
missing so we need to shift them off before we call set_bits and shift
again when we get the bits. Found by inspection.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Instead of fetching the information out of the instruction directly,
fetch the descriptor and then pluck the information out of the
descriptor. The current scheme works ok for SEND but with SENDS, it all
falls to pieces because the descriptor is completely shuffled around.
This commit doesn't actually convert everything. One notable exception
is URB messages which don't even use descriptors in emit_urb_WRITE yet.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
We want to be able to extract data from descriptors as well as unify a
bit of the descriptor construction.
One of the unifications we do is to unify the read/write and dataport
descriptors. On gen4-5, read/write are substantially different and the
read descriptors change between gen4 and gen4.x. On gen6, they unified
layouts between read, write, and dataport. Then, on gen8, they added
one bit to the message type field but left it reserved MBZ for
read/write messages. This commit chooses to treat that as if they
expanded the field everywhere and just didn't have enough enum values
for read/write to bother with the extra bit.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This commit pulls the surface descriptor helpers out into brw_eu.h and
makes them no longer depend on the codegen infrastructure. This should
allow us to use them directly from the IR code instead of the generator.
This change is unfortunately less mechanical than perhaps one would like
but it should be fairly straightforward.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Instead of magically falling back to SIMD8 for atomics and typed
messages on Ivy Bridge, explicitly figure out the exec size and pass
that into brw_surface_payload_size.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
