RadeonSI only uses Z32_FLOAT_CLAMP for upgraded depth textures
on GFX10 and RADV doesn't promotes Z16 or Z24.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This late optimization pass is only affected by nir_opt_if() and handles all cases
in a single pass. It's enough to call it once after the optimization loop.
No changes on vkpipeline-db.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Since logicop_func 0 is PIPE_LOGIOP_CLEAR, we were trigger lowerinng
of logic ops on precompiled shaders, which we don't want to do. Also, this
had the side effect of making shader-db crash, as during this lowering we
would try to read the color format swizzle information from the fragment shader
key that we don't populate in precompiled shaders because right now we only
need it when logic operations are enabled.
Reviewed-by: Eric Anholt <eric@anholt.net>
If we detect that a scheduling candidate will stall because having a
register source that is the written by the SFU unit in the previous
instruction we reduce its priority so any non stalling operation would
be chosen.
The latency of SFU operations is defined as 2. So they would be scheduled
earlier if other candidates have the same priority.
Finally we won't merge instructions that stall to a previously chosen one.
As the result of the previous one would be waiting for an extra cycle.
Although shader-db result show that instruction are hurt with an increase
of 0.35% the sum of instructions + stalls is reduced a 0.52%. And
the total of sfu-stalls is reduced a 63.51%. It implies also a small
increase in the max-temps metric because of scheduling earlier SFU
operations.
total instructions in shared programs: 9102719 -> 9117851 (0.17%)
instructions in affected programs: 4324628 -> 4339760 (0.35%)
helped: 4162
HURT: 12128
helped stats (abs) min: 1 max: 10 x̄: 1.28 x̃: 1
helped stats (rel) min: 0.09% max: 4.76% x̄: 0.66% x̃: 0.51%
HURT stats (abs) min: 1 max: 27 x̄: 1.69 x̃: 1
HURT stats (rel) min: 0.05% max: 7.69% x̄: 0.87% x̃: 0.68%
95% mean confidence interval for instructions value: 0.90 0.96
95% mean confidence interval for instructions %-change: 0.47% 0.50%
Instructions are HURT.
total max-temps in shared programs: 1327728 -> 1327812 (<.01%)
max-temps in affected programs: 4730 -> 4814 (1.78%)
helped: 61
HURT: 134
helped stats (abs) min: 1 max: 2 x̄: 1.08 x̃: 1
helped stats (rel) min: 2.70% max: 13.33% x̄: 4.89% x̃: 4.17%
HURT stats (abs) min: 1 max: 3 x̄: 1.12 x̃: 1
HURT stats (rel) min: 1.54% max: 20.00% x̄: 6.10% x̃: 5.26%
95% mean confidence interval for max-temps value: 0.28 0.58
95% mean confidence interval for max-temps %-change: 1.80% 3.52%
Max-temps are HURT.
total sfu-stalls in shared programs: 99551 -> 36324 (-63.51%)
sfu-stalls in affected programs: 95029 -> 31802 (-66.53%)
helped: 25882
HURT: 0
helped stats (abs) min: 1 max: 27 x̄: 2.44 x̃: 2
helped stats (rel) min: 5.26% max: 100.00% x̄: 79.86% x̃: 100.00%
95% mean confidence interval for sfu-stalls value: -2.47 -2.42
95% mean confidence interval for sfu-stalls %-change: -80.18% -79.54%
Sfu-stalls are helped.
total inst-and-stalls in shared programs: 9202270 -> 9154175 (-0.52%)
inst-and-stalls in affected programs: 5618516 -> 5570421 (-0.86%)
helped: 22728
HURT: 855
helped stats (abs) min: 1 max: 31 x̄: 2.16 x̃: 1
helped stats (rel) min: 0.07% max: 16.67% x̄: 1.14% x̃: 0.92%
HURT stats (abs) min: 1 max: 5 x̄: 1.25 x̃: 1
HURT stats (rel) min: 0.12% max: 5.26% x̄: 1.24% x̃: 0.86%
95% mean confidence interval for inst-and-stalls value: -2.07 -2.01
95% mean confidence interval for inst-and-stalls %-change: -1.07% -1.05%
Inst-and-stalls are helped.
v2: Rename v3d_qpu_generates_sfu_stalls to v3d_qpu_instr_is_sfu (Eric)
Reviewed-by: Eric Anholt <eric@anholt.net>
SFU operations have a latency of 2 cicles, so if their results
are used in the following cycle to a SFU instruction, the GPU
stalls for an extra cycle until the result is available.
This adds the number of stalls to the shader-db debug mode and
sum of instruction + stalls to evaluate optimizations to schedule
instructions that avoid generating sfu-stalls.
v2: Rename v3d_qpu_generates_sfu_stalls to v3d_qpu_instr_is_sfu (Eric)
Reviewed-by: Eric Anholt <eric@anholt.net>
snprintf() always terminates the string.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
For es_vgpr_comp_cnt.
Fixes: 795adbbadd "radv/gfx10: Add pipeline state support for tess."
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
In virgl_buffer_transfer_extend, when no flush is needed, it tries
to extend a previously queued transfer instead if it can find one.
Comparing to virgl_resource_transfer_prepare, it fails to check if
the resource is busy.
The existence of a previously queued transfer normally implies that
the resource is not busy, maybe except for when the transfer is
PIPE_TRANSFER_UNSYNCHRONIZED. Rather than burdening us with a
lengthy comment, and potential concerns over breaking it as the
transfer code evolves, this commit makes the valid_buffer_range
check the only condition to take the fast path.
In real world, we hit the fast path almost only because of the
valid_buffer_range check. In micro benchmarks, the condition should
always be true, otherwise the benchmarks are not very representative
of meaningful workloads. I think this fix is justified.
The recent change to PIPE_TRANSFER_MAP_DIRECTLY usage disables the
fast path. This commit re-enables it as well.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Do not take a transfer and do the memcpy. Add a _buffer suffix to
the function name to make it clear that it is only for buffers.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Without setting hw_res, virgl_transfer_queue_extend never finds a
match and always returns NULL.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Legacy GS has to use Wave64, so TES before GS has to use Wave64 too.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Now we can assume that shader->selector is always set.
This will simplify some code.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This has no effect on Wave64.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
as_ngg is required by Wave32.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
because legacy VS hangs.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
We have to fix the computation so as not to break quads.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
no changes since gfx9 for buffers
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
