We lower NIR's load_constant to load_global_constant, which uses A64
bindless messages. As such, we do the following math to produce the
address for each load:
base_lo@32 <- BRW_SHADER_RELOC_CONST_DATA_ADDR_LOW
base_hi@32 <- BRW_SHADER_RELOC_CONST_DATA_ADDR_HIGH
base@64 <- pack_64_2x32_split(base_lo, base_hi)
addr@64 <- iadd(base@64, u2u64(offset@32))
On platforms that emulate 64-bit math, we have to emit additional code
for the 64-bit iadd to handle the possibility of a carry happening and
affecting the top bits.
However, NIR constant data is always uploaded adjacent to the shader
assembly, in the same buffer. These buffers are required to live in a
4GB region of memory starting at Instruction State Base Address. We
always place the base address at a 4GB address. So the constant data
always lives in a buffer entirely contained within a 4GB region, which
means any offsets from the start of the buffer cannot possibly affect
the high bits.
So instead, we can simply do a 32-bit addition between the low bits of
the base and the offset, then pack that with the unchanged high bits.
On anv, INSTRUCTION_STATE_POOL_MIN_ADDRESS is 8GB, so the high bits are
always 0x2. We don't even need to patch that portion of the address and
can just use an immediate value. We do still need to pack, however.
fossil-db on Icelake indicates the following for affected shaders:
Instrs: 10830023 -> 10750080 (-0.74%)
Cycles: 1048521282 -> 1046770379 (-0.17%); split: -0.33%, +0.16%
Subgroup size: 103104 -> 103112 (+0.01%)
Send messages: 570886 -> 570760 (-0.02%)
Loop count: 14428 -> 14429 (+0.01%)
Spill count: 14246 -> 14244 (-0.01%); split: -0.06%, +0.04%
Fill count: 22802 -> 22794 (-0.04%); split: -0.04%, +0.01%
Scratch Memory Size: 654336 -> 662528 (+1.25%)
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20999>
Be conservative in Gfx11+ and always stall in a fence. Since there are
two different fences, and shader might want to synchronize between them.
This change also brings back the original code block for the stall
between the fence and comment from the commit
b390ff3517.
v2: (Caio)
- Re-arrange code block.
- Adjust comment.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/6958
Fixes: f7262462 ("intel/fs: Rework fence handling in brw_fs_nir.cpp")
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Tested-by: Mark Janes <markjanes@swizzler.org>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20996>
u_vector_add() don't keep the returned pointers valid.
After the initial size allocated in u_vector_init() is reached it will
allocate a bigger buffer and copy data from older buffer to the new
one and free the old buffer, making all the previous pointers returned
by u_vector_add() invalid and crashing the application when trying to
access it.
This is reproduced when running
dEQP-VK.synchronization.signal_order.timeline_semaphore.* in DG2 SKUs
that has 4 CCS engines, INTEL_COMPUTE_CLASS=1 is set and of course
perfetto build is enabled.
To fix this issue here I'm moving the storage/allocation of
struct intel_ds_queue to struct anv_queue/iris_batch and using
struct list_head to maintain a chain of intel_ds_queue of the
intel_ds_device.
This allows us to append or remove queues dynamically in future if
necessary.
Fixes: e760c5b37b ("anv: add perfetto source")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20977>
Patch changes comment to refer to the lineage 14014097488, this
workaround applies for ICL as well.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20952>
Allowing longer writes reduces the number of send messages needed
to support unaligned 4-component writes.
Note: nothing currently generates 8-component writes, so this change
makes "second_mask" code path in emit_urb_direct_writes and
emit_urb_indirect_writes_mod dead.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20858>
Our hardware requires that we write to URB using full vec4s at aligned
addresses. It gives us an ability to mask-off dwords within vec4 we don't
want to write, but we have to know their positions at compile time.
Let's assume that:
- V represents one dword we want to write
- ? is an unitinitialized value
- "|" is a vec4 boundary.
When we want to write 2-dword value at offset 0 we generate 1 write message:
| V1 V2 ? ? |
with mask:
| 1 1 0 0 |
When we want to write 4-dword value at offset 2 we generate 2 write messages:
| ? ? V1 V2 | V3 V4 ? ? |
with mask:
| 0 0 1 1 | 1 1 0 0 |
However if we don't know the offset within vec4 at *compile time* we
currently generate 4 write messages:
| V1 V1 V1 V1 |
| 0 0 1 0 |
| V2 V2 V2 V2 |
| 0 0 0 1 |
| V3 V3 V3 V3 |
| 1 0 0 0 |
| V4 V4 V4 V4 |
| 0 1 0 0 |
where masks are determined at *run time*.
This is quite wasteful and slow.
However, if we could determine the offset modulo 4 statically at compile time,
we could generate only 1 or 2 write messages (1 if modulo is 0) instead of 4.
This is what this patch does: it analyzes the addressing expression for
modulo 4 value and if it can determine it at compile time, we generate
1 or 2 writes, and if it can't we fallback to the old 4 writes method.
In mesh shader, the value of offset modulo 4 should be known for all outputs,
with an exception of primitive indices.
The modulo value should be known because of MUE layout restrictions, which
require that user per-primitive and per-vertex data start at address aligned
to 8 dwords and we should statically always know the offset from this base.
There can be some cases where the offset from the base is more dynamic
(e.g. indirect array access inside a per-vertex value), so we always do
the analysis.
Primitive indices are an exception, because they form vec3s (for triangles),
which means that the offset will not be easy to analyse.
When U888X index format lands, primitive indices will use only one dword
per triangle, which means that we'll always write them using one message.
Task shaders don't have any predetermined structure of output memory, so
always do the analysis.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20050>
When writing descriptor with a null buffer/image we expect that
writing 0 will point to the null surface. For that to work the null
surface has to be in the bindless surface heap.
This fixes some new failures in dEQP-VK.robustness.* tests once
rewritten from the NV_ray_tracing to KHR_ray_tracing extension.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 4ceaed7839 ("anv: split internal surface states from descriptors")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7762
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20953>
The anv_execbuf_add_bo() function already sets the offsets for the
exec_objects. Since we're always using softpin and never using
relocations all these objects should have non-changing offsets, all
set during anv_bo creation and never changed. Not only we should not
change these offsets, we definitely don't change them between
anv_execbuf_add_bo() and this loop we're removing.
Previously, we'd have the offset set as -1 for BOs that had never been
submitted when we were not using softpin.
Notice that with games we can have several hundreds of BOs in this
array.
This loop was added by:
c5f7e1f5b4 ("anv: Delete relocation support from batch submission")
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20885>
Commit 582bf4d9 turned on write-combining for most (all?) memory
allocations. This caused a fairly large performance drop in some of
our VMware tests (application traces, such as Windows Metro Paint).
This patch adds a third memory type configuration: DEVICE_LOCAL,
HOST_VISIBLE, HOST_COHERENT. This is uncached. Then, in
anv_AllocateMemory() we only use write-combining for this uncached
type. This memory type is found in the Intel Windows Vulkan driver.
And according to
https://asawicki.info/news_1740_vulkan_memory_types_on_pc_and_how_to_use_them
uncached memory correlates to write-combined memory.
This fixes our performance regression (and actually produced the
fastest ever results for our test suite).
Signed-off-by: Brian Paul <brianp@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20770>
We can lower FS_OPCODE_UNIFORM_PULL_CONSTANT_LOAD into other more
generic sends and drop this internal opcode.
The idea behind this change is to allow bindless surfaces to be used
for UBO pulls and why it's interesting to be able to reuse
setup_surface_descriptors(). But that will come in a later change.
No shader-db changes on TGL & DG2.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20416>
If you're only affecting one or a couple of drivers, it would be nice if
your pipeline buttons on the web UI weren't full of manual run buttons for
all the other drivers.
This is a bunch of duplicated lines, but less than it could have been now
that we have !references.
In some of these cases (i915g, nouveau, etnaviv), we have no non-manual
jobs for those drivers, so I could have just rewritten the original
"driver-rules" to "driver-manual-rules". I decided to keep things
consistent between drivers, though, because this is all esoteric enough to
readers already without making different drivers' rules look different.
Fixes: #4891
Acked-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17445>
The ACP entries created by copy propagation to track the implied
copies of LOAD_PAYLOAD instructions don't model the behavior of
LOAD_PAYLOAD correctly, since (as of 41868bb682) header
moves are implicitly retyped to UD and the destination of non-header
copies implicitly uses the same type as the corresponding source, even
though the ACP entries created for such copies could incorrectly
represent a type conversion, which can lead to mis-optimization of the
program.
According to Marcin, this fixes the func.mesh.ext.workgroup_id.task.q0
crucible test.
Fixes: 41868bb682 ("i965/fs: Rework the fs_visitor LOAD_PAYLOAD instruction")
Reported-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Tested-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18980>
This value is also stored in vk_queue, so we can nuke from anv_queue.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20888>
This value is also stored in vk_queue, so we can nuke from anv_queue.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20888>
Here adding kmd_type parameter to
intel_gem_read_render_timestamp(), intel_gem_can_render_on_fd() and
intel_gem_supports_protected_context().
Those 3 functions will have Xe implementations, the other functions
in intel_gem.h will not be called by Xe code paths so not adding
kernel_driver_type to it.
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20773>
This will be needed to execute proper function to fetch engines from
kernel mode driver.
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20773>
Intel GPUs will have a new kernel mode driver, support for some
platforms will overlap so we will need to detect in runtime what is
the kernel mode driver loaded for each device.
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20773>
See the comments in emit_apply_pipe_flushes(). Flushing HDC is not
sufficient in GPGPU mode, and we need to set the untyped data port flush
bit as well.
Fixes many dEQP-VK failures with INTEL_COMPUTE_CLASS=1 on Alchemist.
Fixes: 1067ec90a5 ("anv: Update PIPELINE_CONTROL flush when switching pipeline mode in TGL+")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20774>
Sometimes you want to diff 2 runs with INTEL_DEBUG=bat, but a tiny
allocation change can mess quite badly with offsets printed in the
decoding, making it hard to look at the diff with meld.
Fortunately our decoder can avoid printing offsets. We just need a
variable to specify that.
We still use the defaults specified by the driver but you can turn
things on/off with :
INTEL_DECODE=+color,-offsets,-floats INTEL_DEBUG=bat ./my_app
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20874>
Started showing up when nir_opt_large_constants call was moved in 88756cee8d.
Fixes dEQP-VK.mesh_shader.ext.smoke.monolithic.fullscreen_gradient*
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes: 88756cee8d ("intel/compiler: Run nir_opt_large_constants before scalarizing consts")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20876>
I stumbled on this when I inserted some suboptimal lowering code after all
optimizations. Adding certain subset of optimizations after my lowering code
actually avoided this bug, so I think it's not possible to hit this on upstream.
Let's fix this for the next person generating suboptimal code...
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20857>
Wa_14015360517 mentions situations where HW produces invalid
occlusion query results when "Pixel Shader Does not write to RT"
bit is set.
"When Pixel Shader Kills Pixel is set, SW must perform a dummy render
target write from the shader and not set this bit, so that Occlusion
Query is correct."
Another situation is when writing to UAV or to NULL render target.
Patch sets field as 'must be zero' to discourage possible use of it.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20849>
I've been running into failures with tests like :
dEQP-VK.robustness.robustness2.bind.notemplate.rgba32i.unroll.nonvolatile.uniform_buffer_dynamic.no_fmt_qual.len_4.samples_1.1d.frag
With the load_global_const_block_intel NIR intrinsic, you can load a
vec8/vec16 with a predicate. The predicate is correctly uniformized to
feed into the SEND instruction's flag register.
The problem is that a series of optimization first remove the
find_live_channel and then changes the broadcast into a simple MOV
instruction, on the assumption that the first channel is always active
if there is not control flow. This is correct.
But after that the cmod optimzation will remove this instruction :
mov.nz.f0.0(16) null:D, vgrf16+0.0<0>:D NoMask
because it seems to be equivalent to :
cmp.g.f0.0(16) vgrf16:D, vgrf12:D, 63d
In this case vgrf16 is the predicate to the load block SEND
instruction. Since the execution mask is different between both, some
of the channels of the SEND instruction end up not being loaded or
loaded with the wrong predication and we end up with incorrect UBO
data.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20852>
Since our X servers don't have a compositor, and we run tests in parallel,
various swap and frontbuffer tests won't ever be stable. Rather than
having every driver have to track those flakes, make a general X11 skips
list as a known issue of our CI rather than pointing fingers at drivers.
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Martin Roukala <martin.roukala@mupuf.org>
Acked-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20798>
This is the Hasvk version of Anv's:
3d37950fd9 ("anv: check the return value of anv_execbuf_add_bo_bitset()")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20800>
This is the Hasvk version of Anv's:
ad6a036a68 ("anv: don't leave undefined values in exec->syncobj_values")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20800>
This has to be before the MI_BATCH_BUFFER_END otherwise it has no
effect.
This also was messing around with you batch length alignment.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: b9aa66d5d0 ("anv: disable preemption for 3DPRIMITIVE during streamout")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20802>
Field must be disabled if any render targets have integer format.
Cc: mesa-stable
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20671>
Field must be disabled if any render targets have integer
format, additionally for Gfx12+ field must be disabled when
num multisamples > 1 or forced multisample count > 1.
Cc: mesa-stable
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20671>
There was a VUID-VkImageViewCreateInfo-image-04739 in the Vulkan 1.3
spec that said:
If image was created with the
VK_IMAGE_CREATE_BLOCK_TEXEL_VIEW_COMPATIBLE_BIT flag and format is a
non-compressed format, viewType must not be VK_IMAGE_VIEW_TYPE_3D
That VUID has since been removed, and when a view of a 3D image is
created, with put the depth into the array_len, so it won't be always 1.
Reviewed-by: Mark Janes <markjanes@swizzler.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20803>
NIR atomic operation intrinsics all have destinations. This is just
copy and pasted from other generic intrinsic handling where that may
or may not be the case.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20604>
These are handled identically in almost all cases. There is one place
in the legacy surface lowering that was obtaining the bitsize from the
opcode, but the LSC-based lowering uses (type_sz(inst->dst.type) * 8)
for that and works just fine. If we just do that in the legacy lowering
too, then we don't need this plethora of opcodes.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20604>
These are basically identical save for:
- shared has surface hardcoded to SLM rather than an SSBO index
- shared has to handle adding the 'base' const_index (SSBO have none)
- the NIR source index for data is shifted by one
It's not worth copy and pasting the entire function for this.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20604>
