Now that every ANGLE use is covered by tag consistency checks
(structured tagging), we don't need the USE_ANGLE flag anymore, because
if we have ANGLE_TAG set, it means that ANGLE is required in this job.
In detail, it means that the test job has inherited ANGLE_TAG from
`.container-builds-angle`.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33421>
Let's setup the CI to enable runner script to check if the ANGLE
binaries from the container/rootfs are matching the intended version.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33421>
This is a request from debug engineers to be able to trace the HW
better when analyzing hangs.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33795>
Fixes: 692b5fa9f2 ("anv: Add shader to copy acceleration structures")
This commit fixes the future test "sparse_binding_structures" for
"header_bottom_address" for ray tracing pipeline.
Even on 48-bit ray tracing (Xe1/2), the software-defined part
instance_leaf_part1.bvh_ptr has to be in canonical form for copy.comp
to deference a bvh, which means we have to preserve the upper 16bits.
This is especially relevant in cases where the acceleration structure buffer
is located high, such as sparse buffer.
Signed-off-by: Kevin Chuang <kaiwenjon23@gmail.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33745>
Fixes: 2fe57947e3 ("anv: Implement encode shader to fit in ANV BVH")
This commit resolves the failures in the future tests
"sparse_binding_structures" for rayquery. Sparse buffers' heaps are
located high, and since it's in canonical form, the higher 16bits are
all set to 1. However, the existing encoder did not expect any non-zero
values at the higher 16bits. As a result, the instance flags got
corrupted, causing most triangle tests to fail.
Thanks for Paulo providing insights about sparse buffer properties.
Co-developed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Kevin Chuang <kaiwenjon23@gmail.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33745>
On Xe2+, Hardware will always have scale.x and scale.y as 1.0.
This is not fixing any issues.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33726>
Our name for this enum was brw_message_target, but it's better known as
shared function ID or SFID. Call it brw_sfid to make it easier to find.
Now that brw only supports Gfx9+, we don't particularly care whether
SFIDs were introduced on Gfx4, Gfx6, or Gfx7.5. Also, the LSC SFIDs
were confusingly tagged "GFX12" but aren't available on Gfx12.0; they
were introduced with Alchemist/Meteorlake.
GFX6_SFID_DATAPORT_SAMPLER_CACHE in particular was confusing. It sounds
like the SFID to use for the sampler on Gfx6+, however it has nothing to
do with the sampler at all. BRW_SFID_SAMPLER remains the sampler SFID.
On Haswell, we ran out of messages on the main data cache data port, and
so they introduced two additional ones, for more messages. The modern
Tigerlake PRMs simply call these DP_DC0, DP_DC1, and DP_DC2. I think
the "sampler" name came from some idea about reorganizing messages that
never materialized (instead, the LSC came as a much larger cleanup).
Recently we've adopted the term "HDC" for the legacy data cluster, as
opposed to "LSC" for the modern Load/Store Cache. To make clear which
SFIDs target the legacy HDC dataports, we use BRW_SFID_HDC0/1/2.
We were also citing the G45, Sandybridge, and Ivybridge PRMs for a
compiler that supports none of those platforms. Cite modern docs.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33650>
It turns out that we need to add a NOP not only in between two
consecutive WHILE instructions, but also after every control flow
instruction that immediately precedes a WHILE.
v2: Rebase after the renames.
Fixes: 5ca883505e ("brw: add a NOP in between WHILE instructions on LNL")
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33021>
I'm not aware of any workloads that will be impacted by this change,
but let's keep our list of control flow instructions complete. A
shader-db run on MTL tells me nothing changes.
v2: "The scheduler relies on HALT not being considered control flow to
be able to move code past HALT instructions. Doing this would prevent
such optimization from happening and would reduce performance
dramatically in some cases." - Francisco.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33021>
In `fossilize-replay --pipeline-hash 375a63e14afa96c4
fossils/fossil-db/steam-dxvk/f1_22_abu_dhabi.dx12vk-ultra.foz`,
`cf_count` would get decremented below zero. This would lead trying to
print `UINT_MAX` levels of indentation just a few lines below. I ran
out of disk space and patience before that finished. 🤣
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33748>
Currently the condition to use a single MOV is failing on immediate
values, so we emit 2 MOVs in SIMD8 instead of a single SIMD16.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33704>
apply our semantic patch manually to the remaining users. Coccinelle bailed on
these files for whatever reason, I guess.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Georg Lehmann <dadschoorse@gmail.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33722>
It looks like even if we pass the header not present in the sampler descriptor,
it's not helping with the correct behavior of texelFetch.
Experiment on real HW shows that if we just zero out the header and include it
in the message, it helps with the correct behavior. I'm not sure if there is a
valid HW workaround for this one.
We can skip masking the sampler message header bits 4:0 but masking them out
doesn't hurt in this case.
Increasing number of parameter impact sampler performance, For example,
a sample message using 5 parameters will not be able to sustain the same
throughput as a sample message with only 4 valid parameters. We should
look out for any perf impact with respect to texel fetch.
This patch fixes ~3k tests involving texelFetch instruction on Xe3+
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33562>
By actually setting the state packets according to the program data.
Also ensure that we correctly flag that the program may be dirty when
the geometry shader state changes
Fixes piglit tests: `spec@!opengl 3.2@gl-3.2-adj-prims * pv-first`
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Backport-to: 25.0
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33658>
Since a previous change ensured that a DO-block is guaranteed to not be
followed by a DO-block, it is sufficient to pick the next block without
requiring to repair the CFG.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33536>
Make the "block after DO" more stable so that adding instructions after
a DO doesn't require repairing the CFG. Use a new SHADER_OPCODE_FLOW
instruction that is a placeholder representing "go to the next block"
and disappears at code generation.
For some context, there are a few facts about how CFG currently works
- Blocks are assumed to not be empty;
- DO is always by itself in a block, i.e. starts and ends a block;
- There are no empty blocks;
- Predicated WHILE and CONTINUE will link to the "block after DO";
- When nesting loops, it is possible that the "block after DO" is
another "DO".
Reasons and further explanations for those are in the brw_cfg.c comments.
What makes this new change useful is that a pass might want to add
instructions between two DO instructions. When that happens, a new
block must be created and any predicated WHILE and CONTINUE must be
repaired.
So, instead of requiring a repair (which has proven to be tricky in
the past), this change adds a block that can be "virtually" empty but
allow instructions to be added without further changes.
One alternative design would be allowing empty blocks, that would be
a deeper change since the blocks are currently assumed to be not empty
in various places. We'll save that for when other changes are made to
the CFG.
The problem described happens in brw_opt_combine_constants, and a
different patch will clean that up.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33536>
Shorter and a preparation to add some functionality to DO().
Had to make it const since that's the convention for builder, so
just made all the sibling helpers const too.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33536>
If no video profile format found, we should return
the custom error code
VK_ERROR_VIDEO_PROFILE_FORMAT_NOT_SUPPORTED_KHR.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33709>
With some of the jobs migrated to the new brask and nissa devices, we can
increase zink-on-anv coverage on brya. Reduce the fraction of Piglit
tests and introduce fractional GLESCTS testing.
Also increase the parallelism of the zink nightly job, but lower its
FDO_CI_CONCURRENT variable to avoid OOMkills. To accommodate this,
decrease the parallelism of the anv-adl-full job.
Additionally, drop redundant HWCI_START_WESTON from full runs that
inherit the variable from their pre-merge jobs.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33671>
Move the piglit CL and SKQP jobs to the new nissa devices. Nissa is
significantly slower than brya, so increase parallelism and timeout
accordingly.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33671>
Move the ANGLE job to the new brask devices. Brask is significantly
slower than brya, so increase the parallelism accordingly.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33671>
Add two new device types in LAVA, brask and nissa. These ADL devices will
be used to offload some of the jobs from brya.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33671>
FDO_CI_CONCURRENT was getting overwritten by .intel-common-test
inheriting FDO_CI_CONCURRENT: 6 from .lava-test, so change the order of
these definitions to fix that.
This change unfortunantely means that GPU_VERSION has to be overwritten
in some cases.
Additionally, drop redundant .anv-test where .anv-angle-test is used.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33671>
We'll want to disable some support for software detiled accesses on
sparse 64bit images because we'll pick a single optimized tiling for
shader detiling which is not going to be block shape compliant for
sparse resources.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32676>
We're about to introduce R64_(S|U)INT support for some images. This
will use a different HW format than what we want for VBOs.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32676>
The expectations are :
- no MSAA images
- a single tiling mode is used when not linear
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32676>
For shader detiling, it's useful to know if we avoid bothering trying
to detile a 1D image.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32676>
