This doesn't fix a known bug, but better safe than sorry.
Also, simplify the expression in si_shader.c.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
because the API pixel shader binary will not emulate alpha test one day,
so the KILL_ENABLE bit must be determined elsewhere.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
vector_insert takes a vector, a scalar location, and a scalar value,
and produces a new vector with that component updated. As such, it
can't be vectorized properly.
vector_extract takes a vector and a scalar location, and returns
that scalar component of the vector. Vectorization doesn't really
make any sense.
Treating both as horizontal operations makes sure the vectorizer
won't try to touch these.
Found by inspection.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This makes it more similar to llvmpipe. It also allows us to let draw emit
code handle things like getting zeros for non-existing vs outputs
automatically. There probably isn't really any overhead either way, there isn't
really any "simply copy everything" code in the emit path it would copy each
attrib individually just the same. Likewise, we still do another mapping step
in softpipe as the layout may still not match exactly (same as in llvmpipe,
should probably nuke the pointless mapping in both drivers).
This fixes the piglit arb_fragment_layer_viewport no_gs/no_write tests.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
They can't actually be 0 (as position is there) but should avoid confusion.
This was supposed to have been done by af7ba989fb
but I accidentally pushed an older version of the patch in the end...
Also prettify slightly. And make some notes about the confusing and useless
fs input "map".
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
draw emit couldn't care less what the interpolation mode is...
This somehow looked like it would matter, all drivers more or less
dutifully filled that in correctly. But this is only used for emit,
if draw needs to know about interpolation mode (for clipping for instance)
it will get that information from the vs anyway.
softpipe actually used to depend on that interpolation parameter, as it
abused that structure quite a bit but no longer.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
softpipe would calculate two "vertex layouts". The second one was however
just used for internal purposes, draw would know nothing about it even though
it looked exactly the same as the other one we tell draw about.
So, store that information separately as this was just confusing.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Unlike llvmpipe, softpipe always tells draw to emit the vertices as-is.
The two vertex layouts it calculates are a bit confusing, one which is just
used to tell draw to emit vertices as-is, and the other which has draw written
all over it but draw is completely unaware of and is used only to look up the
correct interpolation info later in setup.
Thus, the slots used are different to what llvmpipe does (I'm going to clean
up the confusing two layout stuff).
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
It was actually slightly buggy (missing initialization / setup not dependent
on new vs albeit I didn't see issues), but the case of non-existing attributes
is now handled by draw emit code so don't need that anymore.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Previously the code would just redirect requests for attributes which
don't exist to use output 0. Rework this to output all zeros instead which
seems more useful - in particular some extensions like
ARB_fragment_layer_viewport require 0 in the fs even if it wasn't output by
previous stages. That way, drivers don't have to special case this depending
if the vs/gs outputs some attribute or not.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Add PCI IDs for the Intel Kabylake platforms. The IDs are taken
directly from the Linux kernel patches, which are under review:
http://lists.freedesktop.org/archives/intel-gfx/2015-October/078967.htmlhttp://cgit.freedesktop.org/~vivijim/drm-intel/log/?h=kbl-upstream-v2
The Kabylake PCI IDs taken from the kernel are rearranged to be in order
of GT type, then PCI ID.
Please note that if this patch is backported, the following fixes will
need to be added before this patch:
commit 28ed1e08e8 "i965/skl: Remove early platform support"
commit c1e38ad370 "i965/skl: Use larger URB size where available."
Thanks to Ben for fixing a bug around setting urb.size, and being
patient with my questions about what the various fields mean.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Suggested-by: Ben Widawsky <benjamin.widawsky@intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (KBL-GT2)
Cc: "11.1" <mesa-stable@lists.freedesktop.org>
Rename SVGA_HINT_FLAG_DRAW_EMITTED to SVGA_HINT_FLAG_CAN_PRE_FLUSH
because preemptive flush can be unblocked by more commands than
draw.
Reviewed-by: Brian Paul <brianp@vmware.com>
The existing code effectively turns off preemptive flushing for all
but the regions used for draws. This turns out to be overly
restrictive as some memory regions, e.g. GMR, may never get a draw
when used as a DMA upload staging area, causing problems for apps
that upload a large amount of textures, e.g. Unigine Heaven.
This patch fixes the Unigine Heaven memory allocation error and
has been verified to not cause a regression in the previous extended
retina display issue.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
In emit_input_declarations(), we are skipping declarations for those
registers that are not being used. But in emit_vertex_attrib_instructions(),
we are still emitting instructions to tweak the vertex attributes even if
they are not being used. This causes an assert in the backend because an
input register is not declared in the shader. This patch fixes the problem
by skipping the instruction if the vertex attribute is not being used.
Changes in this patch is originated from the code snippet from Jose as
suggested in bug 1530161.
Tested with piglit, Heaven, Turbine, glretrace.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
If the only dirty state is mesa's _NEW_PROGRAM_CONSTANTS flag, we can
skip state validation before drawing a bitmap since that state doesn't
effect bitmap rendering.
This further increases the performance of the ipers demo on llvmpipe
to about what it was before commit 36c93a6fae.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
We were checking the dirty->st flags but not the dirty->mesa flags.
When we took the early return, we didn't clear the dirty->mesa flags
so the next time we called st_validate_state() we'd often flush the
glBitmap cache. And since st_validate_state() is called from
st_Bitmap(), it meant we flushed the bitmap cache for every glBitmap()
call.
This change seems to recover most of the performance loss observed
with the ipers demo on llvmpipe since commit commit 36c93a6fae.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Previously each member was being counted as using a single slot,
count_attribute_slots() fixes the count for array and struct members.
Also don't assign a negitive to the unsigned expl_location variable.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Previously we were only reserving a single location for arrays and
structs.
We also didn't take into account implicit locations clashing with
explicit locations when assigning locations for their arrays or
structs.
This patch fixes both issues.
V5: fix regression for patch inputs/outputs in tessellation shaders
V4: just use count_attribute_slots() to get the number of slots,
also calculate the correct number of slots to reserve for gs and
tess stages by making use of the new get_varying_type() helper.
V3: handle arrays of structs
V2: also fix for arrays of arrays and structs.
Acked-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This will be used in the following patch for calculating array sizes correctly
when reserving explicit varying locations.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Previously we would pack varyings before trying to remove them, this
relied on the packing pass not packing varyings with a location of -1
to avoid packing varyings that should be removed.
However this meant unused varyings with an explicit location would be
packed before they could be removed when we enable packing of them in a
later patch.
V2: fix regression in V1 removing unused varyings in multi-stage SSO,
fix regression with single stage programs.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
ALIGN_DIVUP is a driver specific(r600g) macro that duplicates DIV_ROUND_UP functionality.
Replacing it with DIV_ROUND_UP eliminates this problems.
Signed-off-by: Krzysztof A. Sobiecki <sobkas@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
I had the driver all tested for the last series, and in my last build I
noticed that get_swizzled_channel was unused now, and removed
it... apparently without testing to find that I removed the wrong channel
swizzle function.
We routinely have code like:
vec1 ssa_220 = fge ssa_104, ssa_61
vec1 ssa_199 = bcsel ssa_220, ssa_106, ssa_105
and we would compare fge's args and choose between ~0 and 0 to generate
ssa_220, then compare ssa_220 to 0 and choose between bcsel's args.
Instead, try to notice the pattern and compare between fge's args to
select between bcsel's args.
total instructions in shared programs: 88019 -> 87574 (-0.51%)
instructions in affected programs: 9985 -> 9540 (-4.46%)
total estimated cycles in shared programs: 245752 -> 245237 (-0.21%)
estimated cycles in affected programs: 17232 -> 16717 (-2.99%)
We can't use its other features currently (mostly because we don't want
Newton-Raphson on rcps for texture coordinates), but it gets us started.
This eliminates some comparisons with constants in GLB2.7 and ETQW traces
at the QIR level by moving the comparisons into NIR, where they get
constant-folded out.
instructions in affected programs: 165 -> 156 (-5.45%)
total uniforms in shared programs: 32087 -> 32085 (-0.01%)
total estimated cycles in shared programs: 245762 -> 245752 (-0.00%)
estimated cycles in affected programs: 461 -> 451 (-2.17%)
I'm moving away from QIR being SSA (since NIR is doing lots of SSA
optimization for us now) and instead having QIR just be QPU operations
with virtual registers. By making our SELs be composed of two MOVs, we
could potentially coalesce the registers for the MOV's src and dst and
eliminate the MOV.
total instructions in shared programs: 88448 -> 88028 (-0.47%)
instructions in affected programs: 39845 -> 39425 (-1.05%)
total estimated cycles in shared programs: 246306 -> 245762 (-0.22%)
estimated cycles in affected programs: 162887 -> 162343 (-0.33%)
If you want the SF of the value of a register produced from a series of
packing MOVs or conditional MOVs, we can't just SF on the last MOV into
the register.
