It's like gl_FragCoord. Still not implemented. This unfortunately makes
point sprites a lot more complicated.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5290>
We're nearly out of dirty bits, and some patches pending review on
GitLab no longer apply due to that. Make room for them by splitting
off shader stage-specific bits into a separate stage_dirty mask.
An alternative would be to split compute-related bits into a separate
mask, but that would prevent the '<< stage' indexing done in various
parts of the driver from working.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5279>
This makes iris_batch_prepare_noop() return a boolean instead of
passing through the relevant set of dirty flags. It will make it
easier to change the representation of dirty flags.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5279>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5318>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5318>
Needed by the next patch, for c++ code which is more strict about
conversions between integers and enums.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5318>
We need to pass it thru to EARLY_Z and WRITES_GLOBAL instead of ignoring
and assuming respectively. Nontrivial performance fix.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5300>
Via the ES3.1 early-z testing force, I've confirmed this bit is e-z.
I've also confirmed e-z must be disabled for global writes, as expected.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5300>
16-bit subgroup ops are implemented with 32-bit instructions
on GFX6-GFX7.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5227>
SDWA is only GFX8+. Use v_mov_b32 since the upper 16 bits don't matter.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5227>
At the NIR level this is a second vector source of the first (only)
argument; at the BIR level this is a pair of scalars.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5307>
Instead of the vendored version. Only for blend shaders at the moment,
frag shaders fb_fetch has a lot more going on.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5285>
Now that we can handle destination sizes directly, this keeps us from
needing to chew through so many conversions.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5285>
Since these shaders are purely internal, the optimization criteria are a
bit different, so it's worth calling attention to this when dumping.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5285>
Here we turn on uniform array resizing in the NIR linker and disable
the GLSL IR resizing pass when the NIR linker is enabled.
This will potentially make uniform arrays smaller due to NIR
optimising away more uniform uses.
Shader-db results (SKL):
total instructions in shared programs: 14947192 -> 14944093 (-0.02%)
instructions in affected programs: 138088 -> 134989 (-2.24%)
helped: 822
HURT: 4
total cycles in shared programs: 324868402 -> 324794597 (-0.02%)
cycles in affected programs: 3904170 -> 3830365 (-1.89%)
helped: 2333
HURT: 1485
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4910>
We want to gather information for all stages here before the main
linking loop. In the following patch we will use to information
to reduce the size of uniform arrays where possible.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4910>
This will be used to reduce the size of uniform arrays and replace
the current glsl ir pass. Doing this in NIR allows us to better
optimise the size of uniform arrays.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4910>
i965 currently uses the NIR uniform linker for spirv support. Until
now the only reason there has been no issue with calling the
lowering pass before the linker is because no garbage collection
is done between the calls.
An upcoming change to the linker will add an optimisation to resize
unform arrays where possible. Because lowering causes the array
defs to no longer be used the new optimisation ends up resizing the
arrays to 0. To fix this we move the lowering call after the
linking calls.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4910>
Drivers (Gallium, i965) expose a linear view of the buffer via
gbm_bo_map.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5238>
If use_scoped_barrier is set to true, we don't have to split the control
and memory barriers.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4900>
Add a lowering pass extracting all control barriers embedded in scoped
barriers into proper control barriers so we can get rid of the logic
inserting control barriers when an SpvOpControlBarrier with WorkGroup
scope is parsed in spirv_to_nir().
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4900>
SPIRV OpControlBarrier can have both a memory and a control barrier
which some hardware can handle with a single instruction. Let's
turn the scoped_memory_barrier into a scoped barrier which can embed
both barrier types. Note that control-only or memory-only barriers can
be supported through this new intrinsic by passing NIR_SCOPE_NONE to the
unused barrier type.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Suggested-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4900>
We are about to add support for scoped control+memory barriers. Let's
move the convert from SPIRV to NIR enums logic in helpers so we can
easily re-use them.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4900>
