This makes the compiler accept invariant, storage, layout, and
interpolation qualifiers in any order when ARB_shading_language_420pack
is enabled.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The GL_ARB_shading_language_420pack extension/GLSL 4.20 allow qualifiers
to be specified in (basically) any order. In order to support this, we
can't hardcode the ordering restrictions in the grammar.
This patch alters the grammar to accept invariant, storage, layout, and
interpolation qualifiers in any order, but adds C code to enforce the
ordering requirements. In the 420pack case, we should be able to simply
skip the error checks.
As a bonus, this also lets us generate decent error messages, rather
than Bison's awful "unexpected TOKEN" errors.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
"Auxiliary storage qualifiers" is the new term given to "centroid",
"patch", and "sample" by GLSL 4.20/GL_ARB_shading_language_420pack.
Even though we only support "centroid", it's useful to add this now
so that all auxiliary storage qualifiers get handled in the right places
once they're eventually supported.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This makes it easy to check if any storage qualifiers are set.
"centroid" is not considered a storage qualifier. In the old language
rules, you can't specify "centroid" by itself; it's always "centroid
in", "centroid out", or "centroid varying." So one of the other storage
qualifiers will always be set; there's no need to specifically check for
centroid.
In the new 4.20 rules, centroid is an auxiliary storage qualifier, not a
storage qualifier.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This makes it easy to check if any layout qualifiers are set.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
All four URB packets need to be programmed together in order for the GPU
state to be valid. Putting them in separate BEGIN..ADVANCE blocks is
risky: if we're nearing the end of a batch, the batch could be flushed
inbetween two of the commands, causing the URB programming to be split
into two batchbuffers.
This -might- be okay with hardware contexts, but it offers no advantages
over keeping them together, and has a potential for hangs.
Putting them into a single BEGIN..ADVANCE block ensures they'll be kept
in the same batch, which seems wise.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Change from "not cacheable" to "cacheable" in L3.
Do so for the draw upload path and blorp.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Change from "not cacheable" to "cacheable" in L3.
Do so for the draw upload path and blorp.
In blorp, change only the PS packet, because the VS packet is disabled.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Change from "not cacheable" to "cacheable" in L3.
Do so for the draw upload path and blorp.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Change from "not cacheable" to "cacheable" in L3.
Do so for the draw upload path and blorp.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Some render types, such as floating-point, aren't valid with EGL.
Return NULL in those cases to drop them.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Mark __DRI_ATTRIB_FLOAT_MODE as deprecated, and introduce new flags to
__DRI_ATTRIB_RENDER_TYPE for float modes. Both signed float
(fbconfig_float) and unsigned (packed_float) are introduced. The old
attribute should be set for both float modes.
v2 (idr): Require that the render mode from the DRI attributes matches the
render mode of the config exactly. This is the behavior of the old code.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Make sure that init_fbconfig_for_chooser sets correct value of
drawableType for visual configs and fbconfigs.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Correctly handle the value of renderType in GLX context. In case of the
value being incorrect, context creation fails.
v2 (idr): indirect_create_context is just a memory allocator, so don't
validate the GLX_RENDER_TYPE there. Fixes regressions in several
GLX_ARB_create_context piglit tests.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
v2 (idr): Open-code the check for GLX_RENDER_TYPE.
dri2_convert_glx_attribs can't be called from here because that function
only exists in direct-rendering builds. Also add a stub version of
indirect_create_context_attribs to tests/fake_glx_screen.cpp to prevent
'make check' regressions.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Set the correct values of renderType in glXCreateContext and
init_fbconfig_for_chooser.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Correctly handle the value of renderType and drawableType in
fbconfig. Modify glXInitializeVisualConfigFromTags to read the parameter
value, or detect it if it's not there.
v2 (idr): If there was no GLX_RENDER_TYPE property, set the type based
purely on the rgbMode as the previous code did. It is impossible for
floatMode to be set at this point, so we can't have a float config. The
previous code regressed a large number of piglit GLX tests because those
tests don't set GLX_RENDER_TYPE in the glXChooseConfig call. Restoring
the old behavior for that case fixes those regressions.
Also fix handling of GLX_DONT_CARE for GLX_RENDER_TYPE. Fixes a
regression in glx-dont-care-mask.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Make sure that context creation routines are provided with the value of
RENDER_TYPE retrieved from GLX attribs.
v2 (idr): Minor formatting changes. Change type of
dri2_convert_glx_attribs render_type parameter to uint32_t to silence
some GCC warnings.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Make sure that renderType property value is stored in GLX context while
it's being created. Further patches will be provided to make the value
correspond to fbconfig's renderType.
v2 (idr): Move a hunk from the next patch to this patch to prevent a
build break.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The L3 controls are identical on all platforms, but LLC differs:
- Ivybridge has a "cache in LLC" flag
- Baytrail has no LLC, but instead has a snoop bit:
"data accesses in this page must be snooped in the CPU caches."
- Haswell has writeback/uncached flags for LLC and eLLC (eDRAM).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
The current gen_matypes logic assumes that the host compiler will produce
information that is useful for the target compiler. Unfortunately, this
is not the case whenever cross-compiling.
When we detect that we're cross-compiling and using GCC, use the target
compiler to produce assembly from the gen_matypes.c source, then process
it with a shell script to create a usable header. This is similar to how
the linux kernel creates its asm-offsets.c file.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This is required in case a wrapper or symlink is used. This patch
has also been sent upstream, awaiting moderation.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Andreas Oberritter <obi@saftware.de>
Adds the dependencies of builtin_compiler as sources when cross
compiling instead of using libtool to share compilation with src/glsl.
The builtin_compiler executable is built for the host when cross
compiling so it doesn't make sense to share compilation with src/glsl
built for the target in this case.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44618
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Jonathan Liu <net147@gmail.com>
Usually with fixed point renderbuffers clamping is done as part of conversion.
However, since we blend in float format, we essentially skip all conversion
steps pre-blend but since this is still a fixed point renderbuffer we must
still clamp the inputs in this case. Makes no difference for piglit though.
Obviously we could skip this if fragment color clamping is enabled, but a)
this is deprecated in OpenGL (d3d never had it) and b) we don't support it
natively so it gets baked into the shader.
Also add some comment about logic ops being broken for srgb, luckily no test
tries to do that as there's no easy fix...
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
We were fixing up the blend factor to ZERO, however this only works correctly
with fixed point render buffers where the input values are clamped to 0/1
(because src_alpha_saturate is min(As, 1-Ad) so can be negative with unclamped
inputs). Haven't seen any failure anywhere due to that with fixed point SNORM
buffers (which clamp inputs to -1/1) but it should apply there as well (snorm
blending is rare, even opengl 4.3 doesn't require snorm rendertargets at all,
d3d10 requires them but they are not blendable).
Doesn't look like piglit hits this though (some internal testing hits the
float case at least). (With legacy OpenGL we could theoretically still use the
fixup to zero if the fragment color clamp is enabled, but we can't detect that
easily since we don't support native clamping hence it gets baked into the
shader.)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Adds H.264 and MPEG2 codec support via VP2, using firmware from the
blob. Acceleration is supported at the bitstream level for H.264 and
IDCT level for MPEG2.
Known issues:
- H.264 interlaced doesn't render properly
- H.264 shows very occasional artifacts on a small fraction of videos
- MPEG2 + VDPAU shows frequent but small artifacts, which aren't there
when using XvMC on the same videos
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Use grep -w instead of the empty string escape sequences
which are less portable. Makes the grep tests
function as intended on OpenBSD.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Vinson Lee <vlee@freedesktop.org>
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Fixes this build error on OpenBSD 5.3.
In file included from ../../src/mesa/main/ff_fragment_shader.cpp:53:
./../glsl/ir_optimization.h:64: error: comma at end of enumerator list
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Fixes these build errors on OpenBSD 5.3.
In file included from ../../src/mesa/main/errors.h:47,
from ../../src/mesa/main/imports.h:41,
from ../../src/mesa/main/ff_fragment_shader.cpp:32:
../../src/mesa/main/mtypes.h:3286: error: comma at end of enumerator list
../../src/mesa/main/mtypes.h:3296: error: comma at end of enumerator list
../../src/mesa/main/mtypes.h:3303: error: comma at end of enumerator list
../../src/mesa/main/mtypes.h:3356: error: comma at end of enumerator list
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Use "or" instead of "add" (this is a classic select sequence, which at
least newer llvm versions can actually recognize (3.2+?), and the "add"
might prevent that - and we really don't want an add instead of an or with
avx if it isn't recognized (even without avx logic ops might be cheaper)).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Instead of just ignoring the srgb/linear conversions, simply call the
corresponding conversion functions, for all of pack/unpack/fetch,
both for float and unorm8 versions (though some don't make a whole
lot of sense, i.e. unorm8/unorm8 srgb/linear combinations).
Refactored some functions a bit so don't have to duplicate all the code
(there's a slight change for packing dxt1_rgb, as there will now be
always 4 components initialized and sent to the external compression
function so the same code can be used for all, the quite horrid and
ad-hoc interface (by now) should always have worked with that).
Fixes llvmpipe/softpipe piglit texwrap GL_EXT_texture_sRGB-s3tc.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Scheduler/register allocator in r600-sb was developed and optimized
on evergreen (VLIW-5) hardware, so currently it's not optimal for
VLIW-4 chips.
This patch should improve performance on cayman gpus due to better alu
packing, but also it tends to increase register usage, so overall positive
effect on performance has to be proven by real benchmarks yet.
Some results with bfgminer kernel on cayman:
source bytecode: 60 gprs, 3905 alu groups,
sbcl before the patch: 45 gprs, 4088 alu groups,
sbcl with this patch: 55 gprs, 3474 alu groups.
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Ex-scalar instructions that became multislot on cayman do replicate result
to all channels - handle them similar to DOT4.
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Mark values that are members of the 'same register' constraint as
preallocated in ra_init pass, this will prevent incorrect
reallocation in scheduler in some cases.
Should fix https://bugs.freedesktop.org/show_bug.cgi?id=66713
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Actually PS doesn't make sense for cayman and isn't even mentioned in
cayman docs, but llvm backend currently uses it in bytecode and, assuming
that hw seems to be mostly ok with it, this will allow sb to parse such
source bytecode correctly.
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Every function but the above four uses explicitly sized types for their
src and dst arguments. Even fetch_rgba_{s,u}int follows the convention.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Marek Olšák <maraeo@gmail.com>
MCJIT is the only supported LLVM JIT on AArch64 and ARM (the regular
JIT has bit-rotted badly on ARM and doesn't exist on AArch64.)
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Historically, we indented grammar production rules with a single 8-space
tab, but code inside of blocks used Mesa's 3-space indents.
This meant when editing code, you had to use an 8-space tab for the
first level of indentation, and 3-spaces after that. Unless you
specifically configure your editor to understand this, it will get the
indentation wrong on every single line you touch, which quickly devolves
into a colossal waste of time.
It's also inconsistent with every other file in the entire project.
This patch removes all tabs and moves to a consistent 3-space indent.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
