Remove skipped asan tests that are now fixed.
Move some asan failures to skip, identifying what are the tests that
caused the failures.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32804>
Totals from 14538 (18.31% of 79395) affected shaders:
no changes
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <None>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32731>
It exits the shaders if the condition is false, not true.
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <None>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32731>
Due to the slow startup time of deqp-vk, the previous default of
500 tests per group caused the jobs to run up to twice as slowly
compared to using a higher number of tests per group.
Increase the number of tests per group in the deqp-runner suite
to bring job durations within a reasonable range.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32729>
These tests have been crashing or timing out for a while now.
Also document two flakes that appeared after decreasing the
faction.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32729>
Due to the slow startup time of deqp-vk, the previous default of
500 tests per group caused the jobs to run up to twice as slowly
compared to using a higher number of tests per group.
Increase the number of tests per group for both subsets of the
deqp-runner suite, which allows decreasing the fraction.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32729>
Due to the slow startup time of deqp-vk, the previous default of
500 tests per group caused the jobs to run up to twice as slowly
compared to using a higher number of tests per group.
Increase the number of tests per group in the deqp-runner suite,
which allows decreasing the fraction and lowering the timeout.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32725>
The only difference between the -full and regular suites was the
fraction. By moving the fractions out of the suites and into
DEQP_FRACTION, we can reuse the same suite definitions.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32725>
Which compiler shader is compiled with could be distinguished
with nir->info.use_aco_amd now, so no need to separate disk
cache id for them.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32742>
sel->stage is MESA_SHADER_COMPUTE for OpenCL shaders, while
nir->info.stage is MESA_SHADER_KERNEL.
Fixes: 955ae53efd radeonsi: fix OpenCL piglit tests fails when using ACO
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32787>
The goal of the commit is to fix a dead assignment detected by static
analyzer: value stored to `linear_ok` is never read.
But instead of just removing the dead assignment, we just remove the
full variable, and instead search for the linear modifier in the place
that is required.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32772>
The goal of the commit is to fix a dead assignment detected by static
analyzer: value stored to `linear_ok` is never read.
But instead of just removing the dead assignment, we just remove the
full variable, and instead search for the linear modifier in the place
that is required.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32772>
Static analyzer is complaining that value stored to `v3d` during its
initialization is never read.
But the variable is used just below in a loop, so it is not clear if
this is just a false positive.
In any case, having this intermediate variable provides nothing,
specially when it is used only in a single place. So rather remove it
and use the full variable.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32772>
`cleared_and_retried` variable is not required, as once the cache is
empty, in the second retry it will retry it is already empty so it won't
retry a new allocation.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32772>
DGC pipelines aren't using the vk_meta helper because that would
require to compute a separate key and that's useless.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32744>
On GFX11+, varying outputs from the last pre-rasterization stage
are implemented by storing the outputs to the so-called
attribute ring.
Make sure to only store them when necessary.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32640>
In AMD terminology, varying outputs are implemented by
parameter export instructions on GFX6-10.3 GPUs.
Only emit those when actually necessary.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32640>
In AMD terminology, a system value is implemented by
position export instructions.
Make sure to only emit those when they are needed.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32640>
To keep track which output is used for what purpose.
Note that this commit just adds the capability to track this
separately in ac/nir. The drivers will need to be updated
in the future to take advantage of this.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32640>
In this commit, just collect the info.
It will be taken into use by subsequent commits.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32640>
Simplify the code using the helpers introduced in previous commits.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32640>
On GFX10-10.3 (when no attribute ring is present), only emit
the GS vertex parameter exports on the vertex export threads.
Other threads don't have anything to export.
Move this code around to make it a bit easier to follow.
Also add some comments to better explain what's what.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32640>
