This avoids the kernel driver spewing out errors about the param not being
supported.
Also correct the max surface size used when the kernel does not support the
query.
Reported-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f5e681f3fa)
intelEmitCopyBlit uses a signed 16-bit integer to represent
buffer pitch, so it can only handle buffer pitches < 32k.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit b3094d9927)
sh->Source is NULL and this will segfault.
Fixes MESA_GLSL=dump with "The Swapper".
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit f896e82301)
Tt's kind of a trap---calling do_common_optimization() after
lower_instructions() may cause opt_algebraic() to reintroduce
ir_triop_lrp expressions that were lowered, effectively defeating the
point. Because of this, nobody uses it.
v2: Delete more code (caught by Ian Romanick).
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit ac0a8b9540)
Both the vector and scalar backends now support it natively, so there's
no point in lowering it.
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 2fdea48e21)
When the vec4 backend encountered an ir_triop_lrp, it always emitted an
actual LRP instruction, which only exists on Gen6+. Gen4-5 used
lower_instructions() to decompose ir_triop_lrp at the IR level.
Since commit 8d37e9915a ("glsl: Optimize open-coded lrp into lrp."),
we've had an bug where lower_instructions translates ir_triop_lrp into
arithmetic, but opt_algebraic reassembles it back into a lrp.
To avoid this ordering concern, just handle ir_triop_lrp in the backend.
The FS backend already does this, so we may as well do likewise.
v2: Add a comment reminding us that we could emit better assembly if we
implemented the infrastructure necessary to support using MAC.
(Assembly code provided by Eric Anholt).
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75253
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 56879a7ac4)
Three source instructions didn't exist until Gen6. vec4_generator has
assertions to catch this, but catching it in the visitor provides a
nicer backtrace.
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit ffde483f3c)
Requested by Marek.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit e4a5a9fd2f)
The linux winsys needs to know whether a surface is shared.
For guest-backed surfaces we need this information to avoid allocating a
mob out of the mob cache for shared surfaces, but instead allocate a shared
mob, that is never put in the mob cache, from the kernel.
Also previously, all surfaces were given the "shareable" attribute when
allocated from the kernel. This is too permissive for client-local surfaces.
Now that we have the needed info, only set the "shareable" attribute if the
client indicates that it needs to share the surface.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 141e39a893)
This is a squash commit of many commits by Thomas Hellstrom.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit fe6a854477)
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 59e7c59621)
In some situations, it may be desirable to bypass the cache at buffer
creation but to insert the buffer in the cache at buffer destruction.
One such situation is where we already have a kernel representation of a
buffer that we want to use, but we also want to insert it in the cache when
it's freed up.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 8af358d8bc)
In some situations it's important to restrict the sizes of buffers that the
cached buffer manager is allowed to return
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit c9e9b1862b)
And update some existing commands.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 823fbfdca7)
This adds new interface functions for guest-backed surfaces and
adds a mobid parameter to the surface_relocation() function.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit d993ada50c)
The old svga3d_reg.h file is split into separate header files and we
add new items for guest-backed surfaces.
Plus some minor code fixes because of renamed symbols.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 2e0c90847f)
If the shader is too large, plug in a dummy shader. This patch also
reworks the existing dummy shader code.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit 97fdace6d7)
Put common code in new svga_shader.c file. Considate separate vertex/
fragment shader ID generation.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit 4686f610b1)
The sort priorites for GLX_SAMPLES and GLX_SAMPLE_BUFFERS are
not defined in GL_ARB_multisample, but they are defined in
the GLX 1.4 specification.
Cc: "9.2 10.0 10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 3616e862f2)
The default values for GLX_DRAWABLE_TYPE and GLX_RENDER_TYPE are
GLX_WINDOW_BIT and GLX_RGBA_BIT respectively, as specified in
the GLX 1.4 specification.
This fixes the glx-choosefbconfig-defaults piglit test.
Cc: "9.2 10.0 10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit f41c2f6c33)
Unfortunately there's only one RT_ARRAY_MODE setting for all
attachments, so clears were previously truncated to the minimum number
of layers any attachment had. Instead set the RT_ARRAY_MODE to 512 (the
max number of layers) before doing the clear. This fixes
gl-3.2-layered-rendering-clear-color-mismatched-layer-count.
Also fix clears of individual layered rt/zeta, in case it ever happens.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Cc: 10.1 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 6152ba0894)
Flush the context when we unmap a buffer, otherwise VDPAU might
start rendering the next frame while we still reference that buffer.
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: StrangeNoises (rachel@strangenoises.org)
(cherry picked from commit db54fca9b8)
Bugzilla (bug needs XBMC changes as well):
https://bugs.freedesktop.org/show_bug.cgi?id=73191
When VL uploads vertex buffers, it uses PIPE_TRANSFER_DONTBLOCK, which always
flushes the context in the winsys if the buffer being mapped is busy. Since
I added handling of DISCARD_RANGE, DONTBLOCK has had no effect when combined
with DISCARD_RANGE and I think the context isn't flushed anywhere else,
so no commands are submitted to the GPU until the IB is full, which takes
a lot of frames.
Using DISCARD_RANGE is not the only way to trigger this bug. The other way
is to reallocate the vertex buffer before every upload.
BTW, I'm not sure if this is the right place for flushing, but it does fix
the bug.
v2 (chk): move the flush to the right place.
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: StrangeNoises (rachel@strangenoises.org)
(cherry picked from commit 3f98053fc9)
brw_init_state() calls brw_upload_initial_gpu_state(). If hardware
contexts are enabled (brw->hw_ctx != NULL), this will upload some
initial invariant state for the GPU. Without hardware contexts, we
rely on this state being uploaded via atoms that subscribe to the
BRW_NEW_CONTEXT bit.
Commit 46d3c2bf4d accidentally moved
the call to brw_init_state() before creating a hardware context.
This meant brw_upload_initial_gpu_state would always early return.
Except on Gen6+, we stopped uploading the initial GPU state via
state atoms, so it never happened.
Fixes a regression since 46d3c2bf4d.
Cc: "10.0 10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 3663bbe773)
From page 14 (page 20 of the PDF) of the GLSL 1.10 spec:
"In addition, all identifiers containing two consecutive underscores
(__) are reserved as possible future keywords."
The intention is that names containing __ are reserved for internal use
by the implementation, and names prefixed with GL_ are reserved for use
by Khronos. Names simply containing __ are dangerous to use, but should
be allowed.
Per the Khronos bug mentioned below, a future version of the GLSL
specification will clarify this.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "9.2 10.0 10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Tested-by: Darius Spitznagel <d.spitznagel@goodbytez.de>
Cc: Tapani Pälli <lemody@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71870
Bugzilla: Khronos #11702
(cherry picked from commit 2c85fd5a96)
Section 3.3 (Preprocessor) of the GLSL 1.30 spec (and later) and the
GLSL ES spec (all versions) say:
"All macro names containing two consecutive underscores ( __ ) are
reserved for future use as predefined macro names. All macro names
prefixed with "GL_" ("GL" followed by a single underscore) are also
reserved."
The intention is that names containing __ are reserved for internal use
by the implementation, and names prefixed with GL_ are reserved for use
by Khronos. Since every extension adds a name prefixed with GL_ (i.e.,
the name of the extension), that should be an error. Names simply
containing __ are dangerous to use, but should be allowed. In similar
cases, the C++ preprocessor specification says, "no diagnostic is
required."
Per the Khronos bug mentioned below, a future version of the GLSL
specification will clarify this.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "9.2 10.0 10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Tested-by: Darius Spitznagel <d.spitznagel@goodbytez.de>
Cc: Tapani Pälli <lemody@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71870
Bugzilla: Khronos #11702
(cherry picked from commit 0bd7892630)
GL_ARB_ES2_compatibility doesn't say anything about shader linking
when one of the shaders (vertex or fragment shader) is absent. So,
the extension shouldn't change the behavior specified in GLSL
specification.
Tested the behavior on proprietary linux drivers of NVIDIA and AMD.
Both of them allow linking a version 100 shader program in OpenGL
context, when one of the shaders is absent.
Makes following Khronos CTS tests to pass:
successfulcompilevert_linkprogram.test
successfulcompilefrag_linkprogram.test
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 03597cf802)
Fixes radeonsi emitting command streams to the kernel even when there
have been no draw calls before a flush, potentially powering up the GPU
needlessly.
Incidentally, this also cuts the runtime of piglit gpu.py in about half
on my Kaveri system, probably because an X11 client going away no longer
always results in a command stream being submitted to the kernel via
glamor.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65761
Cc: "10.1" mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit cf0172d46a)
If built without llvm, the following error occurs with mplayer:
Failed to open VDPAU backend .../libvdpau_r600.so: undefined symbol: _ZTVN10__cxxabiv117__class_type_infoE
[vo/vdpau] Error when calling vdp_device_create_x11: 1
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 61f6cddef7)
As documented, the _mesa_free_shader_program_data function:
"Frees all the data that hangs off a shader program object, but not
the object itself."
This means that this function may be called multiple times on the same object,
(and has been observed to). Meanwhile, the shProg->Label field was not being
set to NULL after its free(). This led to a second call to free() of the same
address on the second call to this function.
Fix this by setting this field to NULL after free(), (just as with all other
calls to free() in this function).
Reviewed-by: Brian Paul <brianp@vmware.com>
CC: mesa-stable@lists.freedesktop.org
(cherry picked from commit a92581acf2)
Commit f4ebcd133b ("dri/nouveau: NV17_3D class is not available for
NV1a chipset") fixed this partially by using the correct 3d class.
However there were a lot of checks left over comparing against the
chipset.
Reported-and-tested-by: John F. Godfrey <jfgodfrey@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: 9.2 10.0 10.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
(cherry picked from commit 0c8b165366)
