This commit switches clear colors to use #if's instead of a C if. This
lets us properly handle SNB where the clear color field doesn't exist.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 87f0ffa646)
This moves the #if's around so that halign and valign have different sets
of #if conditions. This also prepares us for SNB because isl_to_gen_halign
is not defined at all on gen6.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 62a5e6e031)
This is purely cosmetic, but it makes things look a bit more readable.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit a60ae9e10a)
This is purely cosmetic, but it makes things look a bit more readable.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 70c8afc0c8)
This is purely cosmetic, but it makes things look a bit more readable.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit e66e70ef47)
They're already zero-initialized and we have no plans of doing anything
more interesting with them.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 39baea551f)
While designated initializers are nice, they also force us to put some
things in the initializer and some things later. Surface state setup is
complicated enough that this really hurts readability in the long run.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit caf2af4181)
This is what gen7 does and it's nice to have a prefix
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit de1d194856)
The PRM states that the values put in Width, Height, and Depth should be
various bits from the value size - 1. We seem to have done this wrong
more-or-less from the start.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Cc: "11.1 11.2 12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 2a1cc94d27)
Previously, we were incrementing length but not actually putting anything
in the Y coordinate. This meant that 1-D TXF operations had a garbage
array index. If the surface is emitted as 1-D non-array, the coordinate
gets discarded and it works fine. If it happens to be bound as an array
surface, it may count as an out-of-bounds array access and you get zero.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "11.1 11.2 12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 0195299c86)
We were adding in the base which is wrong because the values given in the
miptree are relative to zero and not the base layer/level.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "11.1 11.2 12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 620f81d2ed)
The RenderTargetViewExtent field of RENDER_SURFACE_STATE is supposed to be
set to the depth of a 3-D texture when rendering. Unfortunatley, that
field is only 9 bits on Sandy Bridge and prior so we can't actually bind
a 3-D texturing for rendering if it has depth > 512. On Ivy Bridge, this
field was bumpped to 11 bits so we can go all the way up to 2048. On Iron
Lake and prior, we don't support layered rendering and we use OffsetX/Y
hacks to render to particular layers so 2048 is ok there too.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "11.1 11.2 12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 6ba88bce64)
This is basically a direct translation of what we do for gen7.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83036
Cc: "11.1 11.2 12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 0f9cd74aab)
This makes texture views sort-of work. It doesn't add full texture view
support for gen4-5 but it is enough to fix the GL_ARB_copy_image formats
piglit test on Iron Lake.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83036
Cc: "11.1 11.2 12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit ee39d3ba91)
There's special logic around finding gl_FragData. It latches onto any
array with FRAG_RESULT_DATA0. However gl_SecondaryFragDataEXT[], added
by GL_EXT_blend_func_extended, fits those parameters as well. The real
frag data array should have index 0 though, so we can use that to
distinguish them.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96617
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.1 11.2 12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 36ed1b695e)
The start instance is applied as an offset into the buffer directly,
ignoring the divisor, not as an instance id offset that respects the
divisor.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 1f4bca798d)
The generic version gets this right already, but this was using an
incorrect formula in SSE.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 5b0d64886d)
Ever since c2581a9375, the binding table layout has depended on the
pipeline. This means that whenever we change pipelines we also need to
re-emit binding tables for the new layout.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 35b53c8d47)
It's tiny and fully generic so there's really no reason for it to be in a
gen7-specific file.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 2bfe0c3374)
There's no good reason for recompiling it
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 9df4d6bb36)
SPIR-V treats it as an input but NIR wants the system value. This
shouldn't have been too much of a surprise given that we have to do the
same conversion in the GLSL IR to NIR pass.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 295e03c980)
Found by inspection.
Cc: 11.2 12.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit f9ddd52317)
As far as I can tell, a sequence of glBitmap followed by texture functions
that refer to a texture bound as the framebuffer is well within what should
be allowed.
Found by inspection.
Cc: 11.2 12.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit e7fff3cfe1)
In the unlikely case that a program uses glBitmap to render to a framebuffer
whose texture is bound in a compute shader.
Found by inspection.
Cc: 11.2 12.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit c542b7e43d)
Cherryview and Broxton don't support DW x DW multiplication. We have
piles of code to handle this, but apparently weren't retyping in the
immediate case.
For example,
tests/spec/arb_tessellation_shader/execution/dvec3-vs-tcs-tes
makes the simulator angry about instructions such as:
mul(8) r18<1>:D r10.0<8;8,1>:D 0x00000003:D
Just retype to W or UW. It should be safe on all platforms.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95462
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit cd89c834a8)
It used to be based on the framebuffer which isn't quite right.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 20e95a746d)
Just setting builder->exact isn't sufficient because that only applies to
instructions that are built with the builder but instructions created
manually and only inserted using the builder are left alone.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit bec07b7292)
This pass is similar to propagate_invariance in the GLSL compiler. The
real "output" of this pass is that any algebraic operations which are
eventually consumed by an invariant variable get marked as "exact".
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 202751fbb7)
While mathematically correct, these two optimizations result in an
expression with substantially lower precision than the original. For any
positive finite floating-point value, log2(x) is well-defined and finite.
More precisely, it is in the range [-150, 150] so any sum of logarithms
log2(a) + log2(b) is also well-defined and finite as long as a and b are
both positive and finite. However, if a and b are either very small or
very large, their product may get flushed to infinity or zero causing
log2(a * b) to be nowhere close to log2(a) + log2(b).
This imprecision was causing incorrect rendering in Talos Principal because
part of its HDR rendering process involves doing 8 texture operations,
clamping the result to [0, 65000], taking a dot-product with a constant,
and then taking the log2. This is done 6 or 8 times and summed to produce
the final result which is written to a red texture. In cases where you
have a region of the screen that is very dark, it can end up getting a
result value of -inf which is not what is intended.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96425
Cc: "11.1 11.2 12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 68e308d853)
The old calculation treated too many RBs as disabled.
Cc: 11.0 11.1 11.2 12.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit c95175581e)
The old limit, introduced in commit afa752d3f0,
was exceeded by 4 SE configurations which hit si_write_harvested_raster_configs.
Cc: 11.1 11.2 12.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 6c2e636982)
Apparently, these are deprecated. There's some AutoUpgrade feature which
is supposed to promote these to cmp/select, which apparently doesn't work
with jit code. It is possible it's not actually even meant to work (see
the bug filed against llvm which couldn't provide an answer neither)
but in any case this is meant to be only temporary unless the intrinsics
are really illegal. So, just use the fallback code (which should be cmp/select,
we're actually doing cmp/sext/trunc/select, but in any case llvm 3.9 manages
to optimize this back to pmin/pmax in the end).
This addresses https://llvm.org/bugs/show_bug.cgi?id=28176
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Tested-by: Vinson Lee <vlee@freedesktop.org>
Tested-by: Aaron Watry <awatry@gmail.com>
(cherry picked from commit b0cf99165a)
This makes the check match up what we do on nv50 as well - there's no
point in switching over the push path if everything's in managed
buffers. This can happen when a shader uses a vertex without an enabled
array - we end up passing it a constant attribute.
This also has the effect of "fixing" some flickering in Talos. I have no
idea why. I've stared at the push logic forwards, backwards, and
sideways. By always forcing the push path (which is slow), the
flickering also goes away, but other rendering is still wrong
(specifically draw 383068 as identified in the bug). However by not
switching over to the push path, draw 383068 is correct.
Note that other flickering remains in Talos, like the red/green
walls/floors. This takes care of the shadow flickering though.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90513
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 154c0a42a2)
If we have a loop, instructions before the tex might be added as tex
uses, and those may in fact dominate all other uses of the tex results.
This however doesn't mean that we don't need a texbar after the tex.
Only check if uses dominate each other they are dominated by the tex.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96565
Fixes: 7752bbc44 (gk104/ir: simplify and fool-proof texbar algorithm)
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 1804aa0b80)
From the Cherryview's PRM, Volume 7, 3D Media GPGPU Engine, Register Region
Restrictions, page 844:
"When source or destination datatype is 64b or operation is integer DWord
multiply, indirect addressing must not be used."
v2:
- Fix it for Broxton too.
v3:
- Simplify code by using subscript() and not creating a new num_components
variable (Kenneth).
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95462
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit bdab572a86)
From the Cherryview PRM, Volume 7, 3D Media GPGPU Engine,
Register Region Restrictions:
"When source or destination is 64b (...), regioning in Align1
must follow these rules:
1. Source and destination horizontal stride must be aligned to
the same qword.
(...)"
v2:
- Fix it for Broxton too.
v3:
- Remove inst->regs_written change as it is not necessary (Ken)
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95462
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 0177dbb6c2)
There are quite a few pipelines that desktop applications (including a
bunch of piglit test) can expect to have run but don't meet the GLES
requirements. Instead of failing validation, just emit a debug message.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96358
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Cc: Gregory Hainaut <gregory.hainaut@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit 6bec55a780)
Previously some callers of precision_qualifier_allowed would strip the
arrayness from the type and some would not. As a result, some places
would not notice that float[6], for example, needed a precision
qualifier.
Fixes the new piglit test no-default-float-array-precision.frag.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96358
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Cc: Gregory Hainaut <gregory.hainaut@gmail.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
(cherry picked from commit 9c87282041)
We still need to recompile the passthrough shader when this value
changes, as it also affects the output vertex count. But otherwise,
we can eliminate recompiles on Gen8+.
We probably want to do this for Gen7 as well, but that requires
rewriting the input release code to use a loop, which is a trade-off
I'd need to consider in more detail.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit c319512e16)
i965 has no special hardware for this, so the best way to implement
this is to pass it in via a uniform.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 2b867264d2)
Fixes three GL44-CTS.tessellation_shader subtests:
- max_patch_vertices
- single.max_patch_vertices
- tessellation_control_to_tessellation_evaluation.gl_PatchVerticesIn
These use gl_PatchVerticesIn in the TES, but don't link against a
TCS (which would allow the linker to lower it to a constant). We had
no handling for the system value in the backend, so it would just
assert fail.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 1bc194cd64)
i965 has no special hardware for this, so we need to pass this value in
as a uniform (unless the TES is linked against a TCS, in which case the
linker can just replace this with a constant).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 0be2105137)
